• Length of pull from 10.5” to 15”
    • Adjustable butt plate and rotational
    • Total weight 9.5 oz
    • Carbon Fiber, Aluminum, and Delrin Construction.
    • Will also work on SIG MPX and MCX
    • This is NOT a buffer tube
    • Length of pull from 10.5" to 15”
    • Butt Plate adjusts up/down and rotational
    • Adjustable cheek riser
    • Aluminum/Delrin construction
    • Ambidextrous design allows for right or left handed shooters
    • "M&P" variation slips over the 15-22 ‘faux’ tube
    • "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
    • 16” Aluminum Shrouded barrel
    • 5.25” effective 1:10 rifling
    • Super feed barrel (no bolt modification required)
    • Lightweight 13.5oz
    • Replaces factory trunnion block
    • Accepts AR15 hand guards

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Black anodized aluminum
    • Light weight
    • Picatinney rail mount
    • Compression fit on barrel
    • Set same height as receiver rail
  • Sale!
    • Decrease mag reload times
    • Mag release made out of 6061, black anodized aluminum
    • High density Delrin magazine funnel
    • High density Delrin Bolt Release Extension
    • *Will NOT work with AKV*
    • Bundle includes:
      • ARV Funnel
      • ARV Bolt Release Extension
      • ARV Mag Release

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Helps reduce felt recoil
    • Decrease mag reload times
    • Bolt release, mag release, & recoil block made out of 6061, black anodized aluminum
    • High density delrin funnel
    • *Will NOT work with ARV*
    • Bundle includes:
      • AKV Funnel
      • AKV Bolt Release
      • AKV Mag Release
      • AKV Recoil Cushion

    Join the waitlist to be emailed when this product becomes available

    • Funnel makes magazine insertion easy and fast
    • Extended bolt release easier to ‘find’
    • Funnel is made from high density Delrin
    • Extended bolt made out of 6061 Aluminum & Black Anodized
    • *Will NOT work with ARV*
    • Kit includes:
      • Funnel
      • Bolt release

    Join the waitlist to be emailed when this product becomes available

    • Replaces factory recoil block
    • Installs in minutes
    • Helps reduce felt recoil
    • Helps reduce muzzle rise
    • Uses a 24# wave spring
    • Engineered for long use
    • *Will NOT work with ARV*

    Join the waitlist to be emailed when this product becomes available

    • Direct replacement
    • Allows the use of your trigger finger for magazine release
    • Retains ‘traditional’ magazine release as well.
    • Ambidextrous design
    • Black anodized aluminum

    Join the waitlist to be emailed when this product becomes available

    • Completely replaces the factory bolt release
    • Extended out and back
    • Made out of 6061 aluminum
    • Black anodized
    • *Will NOT work with ARV*
    • Comes with spring
    • Adds 25 more rounds
    • Designed for fast, easy cleaning
    • Allows for bolt hold open
    • Made of delrin
    • Machined in house

    Join the waitlist to be emailed when this product becomes available

    • Cleans out lead and poly coated build up from rounds over time
    • Made out of steel
    • Attachable to a drill
    • PCC option WILL NOT work with XLW barrel
  • Sale!
    • 16" ULW barrel (5.25" effective rifling)
    • Pin and weld aluminum shroud
    • 15oz
    • Black nitride bolt (extreme short stroke config)
    • Bolt comes with short stroke pads
    • 16” legal length rifle barrel
    • Pin and weld aluminum shroud
    • Approximately 5.25” effective rifling
    • Throated chamber to allow for longer over all length ammunition
    • Shroud is hard coat anodized
    • HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
  • Signature Upper for AR15-9mm

    $349.95$389.95
    • Slick Side Upper
    • Extreme ULW Hand Guard
    • Choice of ULW, XLW, MID-B, or 10/16 barrel
    • 2.5 pounds (with bolt)
    • 9mm bolt sold separately
    • Charge handle not included
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • 4140 steel
    • Black Nitride Finish
    • Throated chamber to allow for longer OAL length ammunition
    • 1:10 twist rate
    • 1/2-28 threaded end
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any standard 9mm bolts
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling)
    • 11oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and weld, brushed aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling)
    • 15oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and weld, hard coat anodized aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • 11.62” long
    • 4oz
    • 1/2-28 thread
    • Unfinished aluminum
    • End user to attach per ATF guide lines if wanting a legal 16” rifle barrel

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling) 
    • 14oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and welded aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • 2 port mid-barrel brake
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

Title