• Length of pull from 10.5” to 15”
    • Adjustable butt plate and rotational
    • Total weight 9.5 oz
    • Carbon Fiber, Aluminum, and Delrin Construction.
    • Will also work on SIG MPX and MCX
    • This is NOT a buffer tube
    • Length of pull from 10.5" to 15”
    • Butt Plate adjusts up/down and rotational
    • Adjustable cheek riser
    • Aluminum/Delrin construction
    • Ambidextrous design allows for right or left handed shooters
    • "M&P" variation slips over the 15-22 ‘faux’ tube
    • "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
    • 16” Aluminum Shrouded barrel
    • 5.25” effective 1:10 rifling
    • Super feed barrel (no bolt modification required)
    • Lightweight 13.5oz
    • Replaces factory trunnion block
    • Accepts AR15 hand guards

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Black anodized aluminum
    • Light weight
    • Picatinney rail mount
    • Compression fit on barrel
    • Set same height as receiver rail
  • Sale!
    • Decrease mag reload times
    • Mag release made out of 6061, black anodized aluminum
    • High density Delrin magazine funnel
    • High density Delrin Bolt Release Extension
    • *Will NOT work with AKV*
    • Bundle includes:
      • ARV Funnel
      • ARV Bolt Release Extension
      • ARV Mag Release

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Helps reduce felt recoil
    • Decrease mag reload times
    • Bolt release, mag release, & recoil block made out of 6061, black anodized aluminum
    • High density delrin funnel
    • *Will NOT work with ARV*
    • Bundle includes:
      • AKV Funnel
      • AKV Bolt Release
      • AKV Mag Release
      • AKV Recoil Cushion

    Join the waitlist to be emailed when this product becomes available

    • Funnel makes magazine insertion easy and fast
    • Extended bolt release easier to ‘find’
    • Funnel is made from high density Delrin
    • Extended bolt made out of 6061 Aluminum & Black Anodized
    • *Will NOT work with ARV*
    • Kit includes:
      • Funnel
      • Bolt release

    Join the waitlist to be emailed when this product becomes available

    • Replaces factory recoil block
    • Installs in minutes
    • Helps reduce felt recoil
    • Helps reduce muzzle rise
    • Uses a 24# wave spring
    • Engineered for long use
    • *Will NOT work with ARV*

    Join the waitlist to be emailed when this product becomes available

    • Direct replacement
    • Allows the use of your trigger finger for magazine release
    • Retains ‘traditional’ magazine release as well.
    • Ambidextrous design
    • Black anodized aluminum

    Join the waitlist to be emailed when this product becomes available

    • Completely replaces the factory bolt release
    • Extended out and back
    • Made out of 6061 aluminum
    • Black anodized
    • *Will NOT work with ARV*
    • Comes with spring
    • Adds 25 more rounds
    • Designed for fast, easy cleaning
    • Allows for bolt hold open
    • Made of delrin
    • Machined in house

    Join the waitlist to be emailed when this product becomes available

    • Cleans out lead and poly coated build up from rounds over time
    • Made out of steel
    • Attachable to a drill
    • PCC option WILL NOT work with XLW barrel
  • Sale!
    • 16" ULW barrel (5.25" effective rifling)
    • Pin and weld aluminum shroud
    • 15oz
    • Black nitride bolt (extreme short stroke config)
    • Bolt comes with short stroke pads
    • 16” legal length rifle barrel
    • Pin and weld aluminum shroud
    • Approximately 5.25” effective rifling
    • Throated chamber to allow for longer over all length ammunition
    • Shroud is hard coat anodized
    • HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
  • Signature Upper for AR15-9mm

    $349.95$389.95
    • Slick Side Upper
    • Extreme ULW Hand Guard
    • Choice of ULW, XLW, MID-B, or 10/16 barrel
    • 2.5 pounds (with bolt)
    • 9mm bolt sold separately
    • Charge handle not included
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • 4140 steel
    • Black Nitride Finish
    • Throated chamber to allow for longer OAL length ammunition
    • 1:10 twist rate
    • 1/2-28 threaded end
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any standard 9mm bolts
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling)
    • 11oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and weld, brushed aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling)
    • 15oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and weld, hard coat anodized aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • 11.62” long
    • 4oz
    • 1/2-28 thread
    • Unfinished aluminum
    • End user to attach per ATF guide lines if wanting a legal 16” rifle barrel

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling) 
    • 14oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and welded aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • 2 port mid-barrel brake
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

    • 10” effective rifling
    • 1:10” Twist rate
    • 1/2-28 thread
    • 13.5oz
    • Works with any standard 9mm bolt
    • Removable top ramp
    • Hand polished bottom feed ramp
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP

    Join the waitlist to be emailed when this product becomes available

    • 13.5” barrel
    • 4140 steel
    • 1/2-28 thread
    • 1lb 1oz
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 4150CM steel
    • Black Nitride Finish
    • Weight: 1lb 4oz
    • Throated chamber to allow for longer OAL length ammunition
    • 1:10 twist rate
    • 1/2-28 threaded end
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any standard 9mm bolts
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • 10” effective rifling (16" total length)
    • 1:10” Twist rate
    • Pinned and welded
    • 1lb 3oz
    • Works with any standard 9mm bolt
    • Removable top ramp
    • Hand polished bottom feed ramp
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

    • 13.5” barrel w/ brake (16.25″ total)
    • Steel brake – pinned/welded
    • 1 lb 8oz
    • 4140 steel
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 14.5” barrel w/ brake (16.25″ total)
    • Steel brake – pinned/welded
    • 1 lb 6oz
    • 4150cm steel
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • ALLOW UPTO 5 DAYS FOR  ASSEMBLEY
    • Designed for carbine buffer tube length
    • For use in blow back actions only
    • Comes with either Enhanced Carbine Spring or flat wire spring*
    • 6.2 ounces
    • 3 stage action
    • Allows for the BHO to function
    • If you need a spacer for a rifle length buffer tube, let us know in the comment section at checkout! 
  • Sale!
    • Air cushioned on the recoil stroke for the last ¾” of travel
    • Buffer weight - 5oz
    • Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
    • Reduces felt recoil and muzzle jump
    • Factory sealed air cushion, no maintenance required
    • Spring loaded cushion softens return stroke
    • Aluminum construction air cushion
    • Custom flat wire spring
    • Short Stroke System, eliminates BHO capabilities.

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Black Nitride finish
    • Stainless Steel
    • Works only with AR-9mm barrels
    • 14.9 ounces
    • Works with both Glock and Colt magazines
    • "Dog-bone" style key for faster cleaning*
  • Sale!
    • Black Nitride finish
    • Pivoting Extractor
    • Low drag, low weight key
    • 13.5oz
    • Works with both Glock and Colt magazines*
    • Allows for the Bolt hold open to function with a shorter stroked rifle.
    • Faster trigger reset
    • Comes with longer spacers to help shorten your stroke
    • COMPLETE READY TO DROP IN w/firing pin, extractor, key, etc.
    • Made out of TITANIUM 
    • No sharp internal corners
    • Stress relieved
    • Works with Taccom, Faxon, and Surmount bolts

    Join the waitlist to be emailed when this product becomes available

    • Mil spec Extractor
    • Polished to promote smooth feeding
    • Under 6 ounces
    • Lightest, most affordable carbon fiber handguard on the market
    • Fire retardant
    • Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
    • Use's a standard Armorers wrench for installation to the upper receiver
  • Sale!
    • Made out of Carbon Fiber
    • Aluminum barrel nut
    • Small diameter for better grip
    • 14.5" length
    • 6oz total weight 
    • Adjustable blast shield to be used with short barrels/long brakes
    • Works great with ULW barrels
    • MLOK slots
    • Comes in Black, Green, Blue, Silver, & Red
    • Blow back actions only!
  • Sale!
    • Made out of Flake Carbon Fiber
    • .1” wall thickness
    • Aluminum barrel nut
    • Small diameter for better grip
    • 14.5″ length
    • 6.5 oz total weight 
    • Works great with ULW barrels
    • Blow back actions only!
    • Machined Aluminium
    • Threading fits the standard AR15 platform
    • Blowback AR style only! (PCC, 22)
    • Replaces the Factory Bumper on the back of the receiver
    • Installs in minutes
    • Helps reduce felt recoil
    • Uses a 25# waves spring and clear hard Polyurethane
    • Engineered for long use
    • Comes with spring
    • Adds 20 more rounds
    • Designed for fast, easy cleaning
    • Allows for bolt hold open
    • Made of delrin
    • Machined in house

    Join the waitlist to be emailed when this product becomes available

    • Enhances Feeding Reliability
    • Stainless Steel
    • Removable
    • Minimal fitting required upper can be modified with a small file
  • Sale!
    • Comes with high power extension spring
    • Holds up to 56-57 w/ Glock 33 round 9mm magazine
    • 10 oz (with factory Glock mag)
    • Made from delrin (friction free | brass doesn't rub against metal)
    • Easy to assemble and clean

    Join the waitlist to be emailed when this product becomes available

    • 23 or 32 coil option
    • 17-2 stainless steel
    • Extra power for the 33 round Glock Magazine
    • Extra power for +10 extensions
    • Will also work on CZ Scorpion Magazines
  • Sale!
    • 3/4” aluminum cushion
    • 25# wave spring, .62” travel
    • Designed for the S&W Response using the TACCOM adjustable 9mm buffer
    • Will also work with the TACCOM ESSB Bolt and the TACCOM adjustable 9mm buffer combination
    • Includes (2) optional 3/8” spacers, aluminum cushion and wave spring
    • Replaces factory end plug
    • Helps reduce felt recoil
    • Delrin (polymer) construction
    • Allows for BHO to function
    • Easy installation
  • Sale!
    • Replaces the factory charge handle
    • Allows for solid, hassle free charging
    • 'Hook' and charge with authority using one finger
    • Allows for charging weapon with shorter magazines inserted in factory buttstock
    • Eliminates the fold/lock feature
    • Will not break

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Lightweight, not bulky, fits the Rifle nicely
    • High strength DELRIN polymer
    • Adjustable for Length of Pull
    • Butt Plate can be angled to fit in the ‘pocket’ of your shoulder
    • Butt Plate has an aggressive texture will stay put!
    • Aluminum QD swivel mount installed
    • Comes with Assembly Hardware
    • Retains the factory recoil system
  • Sale!
    • Light weight 1.6 ounces
    • Black anodized aluminum finish
    • Easy installation
    • Attaches with a 13/16” wrench
    • Allows the use of any AR15 hand guard nut
  • Sale!
    • 11oz
    • 13.625" long
    • Aluminum hand guard/nut
    • Black anodized
    • Picatinny top rail
    • MLOK slots
  • Sale!
    • Lightweight 2.0 ounces
    • Black anodized aluminum
    • Allows for red dot sight to be mounted similar in position to the AR15 platform
    • Same height off the barrel as the factory rail
    • Allows for iron sights to be co-witnessed with scope
    • Will not increase folded foot print.
    • Solid mounting with 6 screws
  • Sale!
    • Wide open sights, no clutter
    • AR15 A2 Sight Height (rail height front/rear)
    • .04” or .06” diameter fiber optic front sight
    • Ghost ring rear or Buck Horn rear sight
    • Super light each sight is less than 1 ounce
    • Aluminum riser black anodized
    • Adjustable for windage and elevation
  • Sale!
    • Steel blade, black oxide coated
    • Comes with green and red fiber optic
    • Mil spec A2 sight height
    • .06" diameter fiber optic front sight
    • 5 port or 9 port design
    • Light weight
    • Short brake .7 oz
    • Long brake 1.1 oz
    • Look under options for thread sizes
    • Black anodized aluminum
    • Long comp designed to make 14.5” barrel legal
    • Please double check your barrel thread before ordering!
  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
    • Machined funnel is made to work with both Glock & SR9 mags

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
      • Black anodized aluminum 1/2-28 Short Muzzle Brake
    • Machined funnel is made to work with both Glock & SR9 mag

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
      • Black anodized aluminum 1/2-28 Long Muzzle Brake
    • Machined funnel is made to work with both Glock & SR9 mags

    Join the waitlist to be emailed when this product becomes available

    • Less than 4oz
    • 1.86” dia
    • MLOK slots
    • Use with factory rear sight, optic mount or our Rear Optic mount
    • Easy installation
    • See list below for model fit
    • Black anodized 6061 Aluminum
    • Mounts directly to barrel
    • Picatinny Rail Spec
    • Same Height as Rear Factory Rail
    • Allows for use of detachable iron sights
    • Uses factory screws to mount
    • Designed to only work with rear factory rail
    • Black anodized 6061 Aluminum
    • Mounts directly to barrel
    • Uses factory screws to mount
    • ¼” lower than factory rail
    • Allows for use of detachable iron sights
    • Leaves the factory rail clear for mounting a red dot sight
    • Picatinny Rail Spec
    • Front and rear rail are at the same height off the bore

    Join the waitlist to be emailed when this product becomes available

    • Black Anodized 6061 Aluminum
    • Mounts directly to the barrel
    • No loss of zero
    • 1/4” lower than the factory rail
    • Approximately 3” long
    • Picatinney rail spec
    • Shipping 5/20

    Join the waitlist to be emailed when this product becomes available

    • Black Neoprene Closed Cell Material
    • Raises your cheek weld by ¼”
    • Adhesive backed
    • Easy installation
    • Works with the ‘traditional’ PC carbine stock

    Join the waitlist to be emailed when this product becomes available

    • Solid Delrin, will not snag on clothing
    • Laser etched pattern so it will not slip in the shoulder pocket
    • Works with factory spacers and hardware
    • CNC machined for a perfect fit

    Join the waitlist to be emailed when this product becomes available

Title