• Enhances Feeding Reliability
    • Stainless Steel
    • Removable
    • Minimal fitting required upper can be modified with a small file
    • Designed for carbine buffer tube length
    • For use in blow back actions only
    • Comes with either Enhanced Carbine Spring or flat wire spring*
    • 6.2 ounces
    • 3 stage action
    • Allows for the BHO to function
    • If you need a spacer for a rifle length buffer tube, let us know in the comment section at checkout! 
    • Replaces the Factory Bumper on the back of the receiver
    • Installs in minutes
    • Helps reduce felt recoil
    • Uses a 25# waves spring and clear hard Polyurethane
    • Engineered for long use
  • Sale!
    • Black Nitride finish
    • Stainless Steel
    • Works only with AR-9mm barrels
    • 14.9 ounces
    • Works with both Glock and Colt magazines
    • "Dog-bone" style key for faster cleaning*
    • Extended and Larger Diameter
    • Aggressive Friction pattern, non-slip
    • Machined in house
    • Comes with attachment screw
    • Works with SR9 and Glock Magazines
    • Snaps on the Ruger factory stock with no tools
    • Makes inserting replacement magazines easy and fast
    • Made from Black Delrin
    • Stock grip models 19100-19112
    • Pistol grip models 19122, 19124, & 19126
    • Easy to install
  • Sale!
    • Black Nitride finish
    • Pivoting Extractor
    • Low drag, low weight key
    • 13.5oz
    • Works with both Glock and Colt magazines*
    • Allows for the Bolt hold open to function with a shorter stroked rifle.
    • Faster trigger reset
    • Comes with longer spacers to help shorten your stroke
    • COMPLETE READY TO DROP IN w/firing pin, extractor, key, etc.
    • Made out of TITANIUM 
    • No sharp internal corners
    • Stress relieved
    • Works with Taccom, Faxon, and Surmount bolts

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling)
    • 15oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and weld, hard coat anodized aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • Black Anodized 6061 Aluminum
    • Mounts directly to the barrel
    • No loss of zero
    • 1/4” lower than the factory rail
    • Approximately 3” long
    • Picatinney rail spec
    • Shipping 5/20

    Join the waitlist to be emailed when this product becomes available

    • 5 port or 9 port design
    • Light weight
    • Short brake .7 oz
    • Long brake 1.1 oz
    • Look under options for thread sizes
    • Black anodized aluminum
    • Long comp designed to make 14.5” barrel legal
    • Please double check your barrel thread before ordering!
    • Under 6 ounces
    • Lightest, most affordable carbon fiber handguard on the market
    • Fire retardant
    • Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
    • Use's a standard Armorers wrench for installation to the upper receiver
    • Use your trigger finger to engage/disengage safety
    • Great for left handed shooters
    • Replaces push button safety
    • Works on Ruger 10/22 and Ruger PC Carbine
    • .312” diameter Stainless safety barrel, delrin levers
    • Can be installed while receiver is still in your stock
    • Works with factory trigger group
    • Check out our installation video below

    Join the waitlist to be emailed when this product becomes available

    • 4140 steel
    • Black Nitride Finish
    • Throated chamber to allow for longer OAL length ammunition
    • 1:10 twist rate
    • 1/2-28 threaded end
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any standard 9mm bolts
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • Super fast magazine changes
    • Simple installation
    • Stainless steel post
    • Large button
    • Less than 4oz
    • 1.86” dia
    • MLOK slots
    • Use with factory rear sight, optic mount or our Rear Optic mount
    • Easy installation
    • See list below for model fit
    • Made out of delrin
    • Easy to find
    • Easy to depress
    • Slightly extended
    • Comes with hardware for install
  • Sale!
    • Made out of Carbon Fiber
    • Aluminum barrel nut
    • Small diameter for better grip
    • 14.5" length
    • 6oz total weight 
    • Adjustable blast shield to be used with short barrels/long brakes
    • Works great with ULW barrels
    • MLOK slots
    • Comes in Black, Green, Blue, Silver, & Red
    • Blow back actions only!
    • 23 or 32 coil option
    • 17-2 stainless steel
    • Extra power for the 33 round Glock Magazine
    • Extra power for +10 extensions
    • Will also work on CZ Scorpion Magazines
  • Sale!
    • Comes with high power extension spring
    • Holds up to 56-57 w/ Glock 33 round 9mm magazine
    • 10 oz (with factory Glock mag)
    • Made from delrin (friction free | brass doesn't rub against metal)
    • Easy to assemble and clean

    Join the waitlist to be emailed when this product becomes available

    • Length of pull from 10.5" to 15”
    • Butt Plate adjusts up/down and rotational
    • Adjustable cheek riser
    • Aluminum/Delrin construction
    • Ambidextrous design allows for right or left handed shooters
    • "M&P" variation slips over the 15-22 ‘faux’ tube
    • "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
    • Strap made out of nylon
    • Attaches to your belt or belt loop for faster access
    • Chamber flag made to universally fit all kinds of competition guns
    • Chrome Silicon Spring
    • Improves Cycling and Overall Operation
    • Longer service life than round wire springs
    • Will NOT fit factory VR80 buffer tube
    • Fits commercial buffer tube
    • Spring works in carbine and rifle buffer tubes
    • Mil spec Extractor
    • Polished to promote smooth feeding
    • Replaces factory recoil block
    • Installs in minutes
    • Helps reduce felt recoil
    • Helps reduce muzzle rise
    • Uses a 24# wave spring
    • Engineered for long use
    • *Will NOT work with ARV*

    Join the waitlist to be emailed when this product becomes available

    • Both grips are 80 grit
    • Made by 3M
    • Key Mod comes with 10 pieces (x4 5.5" | x4 3.2" | x2 solid)
    • MLOK comes with 10 pieces (x8 4.7" | x2 solid)
  • Sale!
    • Lightweight 2.0 ounces
    • Black anodized aluminum
    • Allows for red dot sight to be mounted similar in position to the AR15 platform
    • Same height off the barrel as the factory rail
    • Allows for iron sights to be co-witnessed with scope
    • Will not increase folded foot print.
    • Solid mounting with 6 screws
    • Replaces factory end plug
    • Helps reduce felt recoil
    • Delrin (polymer) construction
    • Allows for BHO to function
    • Easy installation
    • Cleans out lead and poly coated build up from rounds over time
    • Made out of steel
    • Attachable to a drill
    • PCC option WILL NOT work with XLW barrel
  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
    • Machined funnel is made to work with both Glock & SR9 mags

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling)
    • 11oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and weld, brushed aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • Solid Delrin, will not snag on clothing
    • Laser etched pattern so it will not slip in the shoulder pocket
    • Works with factory spacers and hardware
    • CNC machined for a perfect fit

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Air cushioned on the recoil stroke for the last ¾” of travel
    • Buffer weight - 5oz
    • Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
    • Reduces felt recoil and muzzle jump
    • Factory sealed air cushion, no maintenance required
    • Spring loaded cushion softens return stroke
    • Aluminum construction air cushion
    • Custom flat wire spring
    • Short Stroke System, eliminates BHO capabilities.

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
      • Black anodized aluminum 1/2-28 Short Muzzle Brake
    • Machined funnel is made to work with both Glock & SR9 mag

    Join the waitlist to be emailed when this product becomes available

    • Length of pull from 10.5” to 15”
    • Adjustable butt plate and rotational
    • Total weight 9.5 oz
    • Carbon Fiber, Aluminum, and Delrin Construction.
    • Will also work on SIG MPX and MCX
    • This is NOT a buffer tube
  • Signature Upper for AR15-9mm

    $349.95$389.95
    • Slick Side Upper
    • Extreme ULW Hand Guard
    • Choice of ULW, XLW, MID-B, or 10/16 barrel
    • 2.5 pounds (with bolt)
    • 9mm bolt sold separately
    • Charge handle not included
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • 10” effective rifling (16" total length)
    • 1:10” Twist rate
    • Pinned and welded
    • 1lb 3oz
    • Works with any standard 9mm bolt
    • Removable top ramp
    • Hand polished bottom feed ramp
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

    • Machined Aluminium
    • Threading fits the standard AR15 platform
    • Blowback AR style only! (PCC, 22)
  • Sale!
    • Helps reduce felt recoil
    • Decrease mag reload times
    • Bolt release, mag release, & recoil block made out of 6061, black anodized aluminum
    • High density delrin funnel
    • *Will NOT work with ARV*
    • Bundle includes:
      • AKV Funnel
      • AKV Bolt Release
      • AKV Mag Release
      • AKV Recoil Cushion

    Join the waitlist to be emailed when this product becomes available

    • 13.5” barrel w/ brake (16.25″ total)
    • Steel brake – pinned/welded
    • 1 lb 8oz
    • 4140 steel
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

Title