• Sale!
    • 16" ULW barrel (5.25" effective rifling)
    • Pin and weld aluminum shroud
    • 15oz
    • Black nitride bolt (extreme short stroke config)
    • Bolt comes with short stroke pads
  • Sale!
    • Made out of Flake Carbon Fiber
    • .1” wall thickness
    • Aluminum barrel nut
    • Small diameter for better grip
    • 14.5″ length
    • 6.5 oz total weight 
    • Works great with ULW barrels
    • Blow back actions only!
  • Sale!
    • 14.5” barrel w/ brake (16.25″ total)
    • Steel brake – pinned/welded
    • 1 lb 6oz
    • 4150cm steel
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • ALLOW UPTO 5 DAYS FOR  ASSEMBLEY
  • Sale!
    • Steel blade, black oxide coated
    • Comes with green and red fiber optic
    • Mil spec A2 sight height
    • .06" diameter fiber optic front sight
    • Black anodized 6061 Aluminum
    • Mounts directly to barrel
    • Uses factory screws to mount
    • ¼” lower than factory rail
    • Allows for use of detachable iron sights
    • Leaves the factory rail clear for mounting a red dot sight
    • Picatinny Rail Spec
    • Front and rear rail are at the same height off the bore

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Light weight 1.6 ounces
    • Black anodized aluminum finish
    • Easy installation
    • Attaches with a 13/16” wrench
    • Allows the use of any AR15 hand guard nut
    • 16” legal length rifle barrel
    • Pin and weld aluminum shroud
    • Approximately 5.25” effective rifling
    • Throated chamber to allow for longer over all length ammunition
    • Shroud is hard coat anodized
    • HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
  • Sale!
    • 4150CM steel
    • Black Nitride Finish
    • Weight: 1lb 4oz
    • Throated chamber to allow for longer OAL length ammunition
    • 1:10 twist rate
    • 1/2-28 threaded end
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any standard 9mm bolts
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling) 
    • 14oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and welded aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • 2 port mid-barrel brake
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Wide open sights, no clutter
    • AR15 A2 Sight Height (rail height front/rear)
    • .04” or .06” diameter fiber optic front sight
    • Ghost ring rear or Buck Horn rear sight
    • Super light each sight is less than 1 ounce
    • Aluminum riser black anodized
    • Adjustable for windage and elevation
    • Comes with spring
    • Adds 25 more rounds
    • Designed for fast, easy cleaning
    • Allows for bolt hold open
    • Made of delrin
    • Machined in house

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
      • Black anodized aluminum 1/2-28 Long Muzzle Brake
    • Machined funnel is made to work with both Glock & SR9 mags

    Join the waitlist to be emailed when this product becomes available

    • 13.5” barrel
    • 4140 steel
    • 1/2-28 thread
    • 1lb 1oz
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 11oz
    • 13.625" long
    • Aluminum hand guard/nut
    • Black anodized
    • Picatinny top rail
    • MLOK slots
    • Comes with spring
    • Adds 20 more rounds
    • Designed for fast, easy cleaning
    • Allows for bolt hold open
    • Made of delrin
    • Machined in house

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Originally made for Mossberg 590 Shockwave and Remington TAC-14
    • Can be used as generic handguard grip
    • 80 Grit
    • Grips made by 3M
  • Sale!
    • Replaces the factory charge handle
    • Allows for solid, hassle free charging
    • 'Hook' and charge with authority using one finger
    • Allows for charging weapon with shorter magazines inserted in factory buttstock
    • Eliminates the fold/lock feature
    • Will not break

    Join the waitlist to be emailed when this product becomes available

    • Black anodized 6061 Aluminum
    • Mounts directly to barrel
    • Picatinny Rail Spec
    • Same Height as Rear Factory Rail
    • Allows for use of detachable iron sights
    • Uses factory screws to mount
    • Designed to only work with rear factory rail
    • 11.62” long
    • 4oz
    • 1/2-28 thread
    • Unfinished aluminum
    • End user to attach per ATF guide lines if wanting a legal 16” rifle barrel

    Join the waitlist to be emailed when this product becomes available

    • Funnel makes magazine insertion easy and fast
    • Extended bolt release easier to ‘find’
    • Funnel is made from high density Delrin
    • Extended bolt made out of 6061 Aluminum & Black Anodized
    • *Will NOT work with ARV*
    • Kit includes:
      • Funnel
      • Bolt release

    Join the waitlist to be emailed when this product becomes available

    • 16” Aluminum Shrouded barrel
    • 5.25” effective 1:10 rifling
    • Super feed barrel (no bolt modification required)
    • Lightweight 13.5oz
    • Replaces factory trunnion block
    • Accepts AR15 hand guards

    Join the waitlist to be emailed when this product becomes available

    • Comes with Spring, T-Nuts and Screws
    • AR15 Kit - works w/ Lancer and Magpul magazines
    • DOES NOT COME WITH AN EXTENSION
    • These kits complete the free downloaded extensions available on our download page
    • 10” effective rifling
    • 1:10” Twist rate
    • 1/2-28 thread
    • 13.5oz
    • Works with any standard 9mm bolt
    • Removable top ramp
    • Hand polished bottom feed ramp
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Lightweight, not bulky, fits the Rifle nicely
    • High strength DELRIN polymer
    • Adjustable for Length of Pull
    • Butt Plate can be angled to fit in the ‘pocket’ of your shoulder
    • Butt Plate has an aggressive texture will stay put!
    • Aluminum QD swivel mount installed
    • Comes with Assembly Hardware
    • Retains the factory recoil system
  • Sale!
    • Decrease mag reload times
    • Mag release made out of 6061, black anodized aluminum
    • High density Delrin magazine funnel
    • High density Delrin Bolt Release Extension
    • *Will NOT work with AKV*
    • Bundle includes:
      • ARV Funnel
      • ARV Bolt Release Extension
      • ARV Mag Release

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 3/4” aluminum cushion
    • 25# wave spring, .62” travel
    • Designed for the S&W Response using the TACCOM adjustable 9mm buffer
    • Will also work with the TACCOM ESSB Bolt and the TACCOM adjustable 9mm buffer combination
    • Includes (2) optional 3/8” spacers, aluminum cushion and wave spring
    • Direct replacement
    • Allows the use of your trigger finger for magazine release
    • Retains ‘traditional’ magazine release as well.
    • Ambidextrous design
    • Black anodized aluminum

    Join the waitlist to be emailed when this product becomes available

    • 6 position carbine tube
    • Commercial spec
    • 6061-T6 Aluminum
    • Black Hardcoat anodize
    • Fits the VR80 & AR-9mm 
    • Comes with Castle Ring and AR15 latch plate

    Join the waitlist to be emailed when this product becomes available

    • Black Neoprene Closed Cell Material
    • Raises your cheek weld by ¼”
    • Adhesive backed
    • Easy installation
    • Works with the ‘traditional’ PC carbine stock

    Join the waitlist to be emailed when this product becomes available

    • Completely replaces the factory bolt release
    • Extended out and back
    • Made out of 6061 aluminum
    • Black anodized
    • *Will NOT work with ARV*
  • Sale!
    • Black anodized aluminum
    • Light weight
    • Picatinney rail mount
    • Compression fit on barrel
    • Set same height as receiver rail
    • 13.5” barrel w/ brake (16.25″ total)
    • Steel brake – pinned/welded
    • 1 lb 8oz
    • 4140 steel
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Helps reduce felt recoil
    • Decrease mag reload times
    • Bolt release, mag release, & recoil block made out of 6061, black anodized aluminum
    • High density delrin funnel
    • *Will NOT work with ARV*
    • Bundle includes:
      • AKV Funnel
      • AKV Bolt Release
      • AKV Mag Release
      • AKV Recoil Cushion

    Join the waitlist to be emailed when this product becomes available

    • Machined Aluminium
    • Threading fits the standard AR15 platform
    • Blowback AR style only! (PCC, 22)
    • 10” effective rifling (16" total length)
    • 1:10” Twist rate
    • Pinned and welded
    • 1lb 3oz
    • Works with any standard 9mm bolt
    • Removable top ramp
    • Hand polished bottom feed ramp
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

  • Signature Upper for AR15-9mm

    $349.95$389.95
    • Slick Side Upper
    • Extreme ULW Hand Guard
    • Choice of ULW, XLW, MID-B, or 10/16 barrel
    • 2.5 pounds (with bolt)
    • 9mm bolt sold separately
    • Charge handle not included
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • Length of pull from 10.5” to 15”
    • Adjustable butt plate and rotational
    • Total weight 9.5 oz
    • Carbon Fiber, Aluminum, and Delrin Construction.
    • Will also work on SIG MPX and MCX
    • This is NOT a buffer tube
  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
      • Black anodized aluminum 1/2-28 Short Muzzle Brake
    • Machined funnel is made to work with both Glock & SR9 mag

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Air cushioned on the recoil stroke for the last ¾” of travel
    • Buffer weight - 5oz
    • Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
    • Reduces felt recoil and muzzle jump
    • Factory sealed air cushion, no maintenance required
    • Spring loaded cushion softens return stroke
    • Aluminum construction air cushion
    • Custom flat wire spring
    • Short Stroke System, eliminates BHO capabilities.

    Join the waitlist to be emailed when this product becomes available

    • Solid Delrin, will not snag on clothing
    • Laser etched pattern so it will not slip in the shoulder pocket
    • Works with factory spacers and hardware
    • CNC machined for a perfect fit

    Join the waitlist to be emailed when this product becomes available

Title