• Under 6 ounces
    • Lightest, most affordable carbon fiber handguard on the market
    • Fire retardant
    • Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
    • Use's a standard Armorers wrench for installation to the upper receiver
    • Enhances Feeding Reliability
    • Stainless Steel
    • Removable
    • Minimal fitting required upper can be modified with a small file
    • Made out of 17-4 stainless steel
    • Heat treated to Rc 42
    • No sharp internal corners
    • Stress relieved
    • Works with Taccom, Faxon, and Surmount bolts

    Join the waitlist to be emailed when this product becomes available

  • Sale!

    Standard Bolt AR15-9mm

    $130.00
    • Black Nitride finish
    • Stainless Steel
    • Works only with AR-9mm barrels
    • 14.9 ounces
    • Works with both Glock and Colt magazines
    • "Dog-bone" style key for faster cleaning*
    • Super fast magazine changes
    • Simple installation
    • Stainless steel post
    • Large button
    • Works with SR9 and Glock Magazines
    • Snaps on the Ruger factory stock with no tools
    • Makes inserting replacement magazines easy and fast
    • Made from Black Delrin
    • Stock grip models 19100-19112
    • Pistol grip models 19122, 19124, & 19126
    • Easy to install
  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
    • Machined funnel is made to work with both Glock & SR9 mags

    Join the waitlist to be emailed when this product becomes available

    • Mil spec Extractor
    • Polished to promote smooth feeding

    Join the waitlist to be emailed when this product becomes available

    • Less than 4oz
    • 1.86” dia
    • MLOK slots
    • Use with factory rear sight, optic mount or our Rear Optic mount
    • Easy installation
    • See list below for model fit
    • Momentarily delays movement of the 9mm bolt
    • Provides for less felt recoil, less sight bounce
    • Second stage cushion at the end of the recoil stroke
    • Works in any carbine buffer tube
    • Short stroked system*
    • Works with any ‘hollow’ pistol caliber bolt**
    • Self contained system, no need for traditional detent pin

    Join the waitlist to be emailed when this product becomes available

    • DLC Matrix Coating
    • Pivoting Extractor
    • Low drag, low weight key
    • 14.4oz
    • Works with both Glock and Colt magazines*
    • Allows for the Bolt hold open to function with a shorter stroked rifle.
    • Faster trigger reset
    • Comes with longer spacers to help shorten your stroke
    • COMPLETE READY TO DROP IN w/firing pin, extractor, key, etc.
    • 13.5” barrel w/ brake (16.25″ total)
    • Steel brake – pinned/welded
    • 1 lb 8oz
    • 4140 steel
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers

    Join the waitlist to be emailed when this product becomes available

    • 10” effective rifling (16" total length)
    • 1:10” Twist rate
    • Pinned and welded
    • 1lb 3oz
    • Works with any standard 9mm bolt
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Replaces factory recoil block
    • Installs in minutes
    • Helps reduce felt recoil
    • Helps reduce muzzle rise
    • Uses a 24# wave spring
    • Engineered for long use
    • *Will NOT work with ARV*
    • Black anodized 6061 Aluminum
    • Mounts directly to barrel
    • Picatinny Rail Spec
    • Same Height as Rear Factory Rail
    • Allows for use of detachable iron sights
    • Uses factory screws to mount
    • Designed to only work with rear factory rail
    • Length of pull from 10.5" to 15”
    • Butt Plate adjusts up/down and rotational
    • Adjustable cheek riser
    • Aluminum/Delrin construction
    • Ambidextrous design allows for right or left handed shooters
    • "M&P" variation slips over the 15-22 ‘faux’ tube
    • "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling)
    • 11oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and weld, brushed aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • Designed for carbine buffer tube length
    • For use in blow back actions only
    • Comes with either Enhanced Carbine Spring or flat wire spring*
    • 6.2 ounces
    • 3 stage action
    • Allows for the BHO to function
    • If you need a spacer for a rifle length buffer tube, let us know in the comment section at checkout! 
    • 5 port or 9 port design
    • Light weight
    • Short brake .7 oz
    • Long brake 1.1 oz
    • Look under options for thread sizes
    • Black anodized aluminum
    • Long comp designed to make 14.5” barrel legal
    • Please double check your barrel thread before ordering!
  • Sale!
    • Comes with high power extension spring
    • Holds up to 56-57 w/ Glock 33 round 9mm magazine
    • 10 oz (with factory Glock mag)
    • Made from delrin (friction free | brass doesn't rub against metal)
    • Easy to assemble and clean

    Join the waitlist to be emailed when this product becomes available

Title