• Length of pull from 10.5” to 15”
    • Adjustable butt plate and rotational
    • Total weight 9.5 oz
    • Carbon Fiber, Aluminum, and Delrin Construction.
    • Will also work on SIG MPX and MCX
    • This is NOT a buffer tube
    • Length of pull from 10.5" to 15”
    • Butt Plate adjusts up/down and rotational
    • Adjustable cheek riser
    • Aluminum/Delrin construction
    • Ambidextrous design allows for right or left handed shooters
    • "M&P" variation slips over the 15-22 ‘faux’ tube
    • "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
    • 16” Aluminum Shrouded barrel
    • 5.25” effective 1:10 rifling
    • Super feed barrel (no bolt modification required)
    • Lightweight 13.5oz
    • Replaces factory trunnion block
    • Accepts AR15 hand guards

    Join the waitlist to be emailed when this product becomes available

    • 11.62” long
    • 4oz
    • 1/2-28 thread
    • Unfinished aluminum
    • End user to attach per ATF guide lines if wanting a legal 16” rifle barrel

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Comes with high power extension spring
    • Holds up to 56-57 w/ Glock 33 round 9mm magazine
    • 10 oz (with factory Glock mag)
    • Made from delrin (friction free | brass doesn't rub against metal)
    • Easy to assemble and clean

    Join the waitlist to be emailed when this product becomes available

    • 23 or 32 coil option
    • 17-2 stainless steel
    • Extra power for the 33 round Glock Magazine
    • Extra power for +10 extensions
    • Will also work on CZ Scorpion Magazines
  • Sale!
    • Wide open sights, no clutter
    • AR15 A2 Sight Height (rail height front/rear)
    • .04” or .06” diameter fiber optic front sight
    • Ghost ring rear or Buck Horn rear sight
    • Super light each sight is less than 1 ounce
    • Aluminum riser black anodized
    • Adjustable for windage and elevation
  • Sale!
    • Steel blade, black oxide coated
    • Comes with green and red fiber optic
    • Mil spec A2 sight height
    • .06" diameter fiber optic front sight
    • 5 port or 9 port design
    • Light weight
    • Short brake .7 oz
    • Long brake 1.1 oz
    • Look under options for thread sizes
    • Black anodized aluminum
    • Long comp designed to make 14.5” barrel legal
    • Please double check your barrel thread before ordering!
  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
    • Machined funnel is made to work with both Glock & SR9 mags

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
      • Black anodized aluminum 1/2-28 Short Muzzle Brake
    • Machined funnel is made to work with both Glock & SR9 mag

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
      • Black anodized aluminum 1/2-28 Long Muzzle Brake
    • Machined funnel is made to work with both Glock & SR9 mags

    Join the waitlist to be emailed when this product becomes available

    • Less than 4oz
    • 1.86” dia
    • MLOK slots
    • Use with factory rear sight, optic mount or our Rear Optic mount
    • Easy installation
    • See list below for model fit
    • Black anodized 6061 Aluminum
    • Mounts directly to barrel
    • Picatinny Rail Spec
    • Same Height as Rear Factory Rail
    • Allows for use of detachable iron sights
    • Uses factory screws to mount
    • Designed to only work with rear factory rail
    • Black anodized 6061 Aluminum
    • Mounts directly to barrel
    • Uses factory screws to mount
    • ¼” lower than factory rail
    • Allows for use of detachable iron sights
    • Leaves the factory rail clear for mounting a red dot sight
    • Picatinny Rail Spec
    • Front and rear rail are at the same height off the bore

    Join the waitlist to be emailed when this product becomes available

    • Black Anodized 6061 Aluminum
    • Mounts directly to the barrel
    • No loss of zero
    • 1/4” lower than the factory rail
    • Approximately 3” long
    • Picatinney rail spec
    • Shipping 5/20

    Join the waitlist to be emailed when this product becomes available

    • Black Neoprene Closed Cell Material
    • Raises your cheek weld by ¼”
    • Adhesive backed
    • Easy installation
    • Works with the ‘traditional’ PC carbine stock

    Join the waitlist to be emailed when this product becomes available

    • Solid Delrin, will not snag on clothing
    • Laser etched pattern so it will not slip in the shoulder pocket
    • Works with factory spacers and hardware
    • CNC machined for a perfect fit

    Join the waitlist to be emailed when this product becomes available

    • Use your trigger finger to engage/disengage safety
    • Great for left handed shooters
    • Replaces push button safety
    • Works on Ruger 10/22 and Ruger PC Carbine
    • .312” diameter Stainless safety barrel, delrin levers
    • Can be installed while receiver is still in your stock
    • Works with factory trigger group
    • Check out our installation video below

    Join the waitlist to be emailed when this product becomes available

    • Made out of delrin
    • Easy to find
    • Easy to depress
    • Slightly extended
    • Comes with hardware for install
    • Super fast magazine changes
    • Simple installation
    • Stainless steel post
    • Large button
    • Extended and Larger Diameter
    • Aggressive Friction pattern, non-slip
    • Machined in house
    • Comes with attachment screw
    • Works with SR9 and Glock Magazines
    • Snaps on the Ruger factory stock with no tools
    • Makes inserting replacement magazines easy and fast
    • Made from Black Delrin
    • Stock grip models 19100-19112
    • Pistol grip models 19122, 19124, & 19126
    • Easy to install
    • Both grips are 80 grit
    • Made by 3M
    • Key Mod comes with 10 pieces (x4 5.5" | x4 3.2" | x2 solid)
    • MLOK comes with 10 pieces (x8 4.7" | x2 solid)
  • Sale!
    • Originally made for Mossberg 590 Shockwave and Remington TAC-14
    • Can be used as generic handguard grip
    • 80 Grit
    • Grips made by 3M
    • Strap made out of nylon
    • Attaches to your belt or belt loop for faster access
    • Chamber flag made to universally fit all kinds of competition guns

Title