• Length of pull from 10.5” to 15”
    • Adjustable butt plate and rotational
    • Total weight 9.5 oz
    • Carbon Fiber, Aluminum, and Delrin Construction.
    • Will also work on SIG MPX and MCX
    • This is NOT a buffer tube
    • Length of pull from 10.5" to 15”
    • Butt Plate adjusts up/down and rotational
    • Adjustable cheek riser
    • Aluminum/Delrin construction
    • Ambidextrous design allows for right or left handed shooters
    • "M&P" variation slips over the 15-22 ‘faux’ tube
    • "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
    • 16” Aluminum Shrouded barrel
    • 5.25” effective 1:10 rifling
    • Super feed barrel (no bolt modification required)
    • Lightweight 13.5oz
    • Replaces factory trunnion block
    • Accepts AR15 hand guards

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Black anodized aluminum
    • Light weight
    • Picatinney rail mount
    • Compression fit on barrel
    • Set same height as receiver rail
  • Sale!
    • 16" ULW barrel (5.25" effective rifling)
    • Pin and weld aluminum shroud
    • 15oz
    • Black nitride bolt (extreme short stroke config)
    • Bolt comes with short stroke pads
    • 16” legal length rifle barrel
    • Pin and weld aluminum shroud
    • Approximately 5.25” effective rifling
    • Throated chamber to allow for longer over all length ammunition
    • Shroud is hard coat anodized
    • HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
  • Signature Upper for AR15-9mm

    $349.95$389.95
    • Slick Side Upper
    • Extreme ULW Hand Guard
    • Choice of ULW, XLW, MID-B, or 10/16 barrel
    • 2.5 pounds (with bolt)
    • 9mm bolt sold separately
    • Charge handle not included
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • 4140 steel
    • Black Nitride Finish
    • Throated chamber to allow for longer OAL length ammunition
    • 1:10 twist rate
    • 1/2-28 threaded end
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any standard 9mm bolts
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling)
    • 11oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and weld, brushed aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling)
    • 15oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and weld, hard coat anodized aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • 11.62” long
    • 4oz
    • 1/2-28 thread
    • Unfinished aluminum
    • End user to attach per ATF guide lines if wanting a legal 16” rifle barrel

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling) 
    • 14oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and welded aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • 2 port mid-barrel brake
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

    • 10” effective rifling
    • 1:10” Twist rate
    • 1/2-28 thread
    • 13.5oz
    • Works with any standard 9mm bolt
    • Removable top ramp
    • Hand polished bottom feed ramp
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP

    Join the waitlist to be emailed when this product becomes available

    • 13.5” barrel
    • 4140 steel
    • 1/2-28 thread
    • 1lb 1oz
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 4150CM steel
    • Black Nitride Finish
    • Weight: 1lb 4oz
    • Throated chamber to allow for longer OAL length ammunition
    • 1:10 twist rate
    • 1/2-28 threaded end
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any standard 9mm bolts
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • 10” effective rifling (16" total length)
    • 1:10” Twist rate
    • Pinned and welded
    • 1lb 3oz
    • Works with any standard 9mm bolt
    • Removable top ramp
    • Hand polished bottom feed ramp
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

    • 13.5” barrel w/ brake (16.25″ total)
    • Steel brake – pinned/welded
    • 1 lb 8oz
    • 4140 steel
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 14.5” barrel w/ brake (16.25″ total)
    • Steel brake – pinned/welded
    • 1 lb 6oz
    • 4150cm steel
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • ALLOW UPTO 5 DAYS FOR  ASSEMBLEY
    • Designed for carbine buffer tube length
    • For use in blow back actions only
    • Comes with either Enhanced Carbine Spring or flat wire spring*
    • 6.2 ounces
    • 3 stage action
    • Allows for the BHO to function
    • If you need a spacer for a rifle length buffer tube, let us know in the comment section at checkout! 
  • Sale!
    • Black Nitride finish
    • Stainless Steel
    • Works only with AR-9mm barrels
    • 14.9 ounces
    • Works with both Glock and Colt magazines
    • "Dog-bone" style key for faster cleaning*

Title