- ULW Barrel
- 16” legal length rifle barrel
- Pin and weld aluminum shroud
- Shroud is hard coat anodized
- 5.25” effective rifling
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- PATENT PENDING Multi angle extreme feed ramp
- Extreme Bolt
- Nickel Boron Coating
- Pivoting Extractor
- Low drag, low weight key
- Both work with Colt & Glock mags
ULW 16″ Barrel and Extreme Bolt Bundle
Out of stock
Out of stock
ULW 16″ Barrel:
Now you can use your pet pistol reloads in a PCC barrel and not have to worry about spiked power factors!!
The TACCOM ULW 9mm Barrel is hands down the lightest barrel on the market for your AR15 PCC, weighing in at 15 ounces.
This barrel will give you the fastest swing possible from target to target. Keeping the velocities down close to your pistol velocities will mean that you will have less recoil, and yes, the recoil is sharp and very fast, yet very gentle as the pressure curve drops off fast with a shorter barrel.
The PATENT PENDING extreme feed ramp allows the use of hollow point ammunition and supports the front end of the glock magazine.
Matching our barrel with one of our popular adjustable 3 stage 9mm system is like a match made in heaven. The barrel itself has an 11 degree target crown and with pistol caliber velocities you have a very accurate and light weight set up.
We designed this barrel with the PCC competitor in mind.
NOTE: WE DO NOT RECOMMEND SHOOTING POLY COATED OR CAST LEAD BULLETS IN THESE BARRELS. IF YOU DO, PAY ATTENTION TO BRUSHING OUT THE TUBE
First, we use a standard mil spec proven 5.56 pivoting extractor for long service use.
Next, we did away with that heavy gas key and replaced it with a low drag, low weight orientation key……all that key does is keep your bolt from rotating, nothing else. No need to stake these bolts, you have 1/5 of the original key weight so it will not become loose and it will not shear your screws.
Going with a low friction coating like Nickel Boron only makes sense in a blow back action, not only will it continue to function in adverse conditions, but it will be a breeze to clean as well. Our bolts are designed to run with our extreme feed barrels but will work equally as well with other standard 9mm AR15 barrels too! Yes, the bolt is rather extreme, but you need that to be a leader.