Competition Package #2 for VR80


Out of stock

  • 7% discounted bundle
  • Package includes:
    • VR80 Muzzle brake
    • VR80 Handguard retainer
  • Comes in Black

Out of stock

Join the waitlist to be emailed when this product becomes available


Hands down the most effective light weight muzzle brake on the market for the VR80 today! The 3.5” long, 8 port design directs the gases out to the side and up to help keep the VR80 linear during recoil. At only 3 ounces, our brake is also designed so that the factory hand guard fits over and slips right off during dis-assembly for cleaning. You just install the opposing split rings that push the hand guard up against the receiver. If you are using the factory barrel shroud to keep the hand guard on, you will need to cut approximately ¾” off the front of the shroud to expose the barrel threads. Once you install and time your brake (we recommend blue Loctite on the barrel threads) tighten up the include brass set screw and you are done; the brake is secure. Changing chokes is easy if you have the RIA extended choke tube tool.

The TACCOM VR80 Hand Guard Retainer provides a unique solution for floating your factory hand guard on to your shotgun. We’ve eliminated the factory barrel nut and retaining rings and replaced all that with basically, a splice that bridges the split between the receiver rail and hand guard rail. You simply remove your barrel nut/shroud and the retaining rings, re-install your hand guard, then slip our retainer over the rail section on the receiver and hand guard. Next tighten up the 4 set screws to clamp and hold the hand guard on tight. You will no longer see a point of impact change after cleaning the gas system and because the hand guard now “floats,” you will see your slug accuracy increase! We’ve made the retainer to be low profile and it actually follows the factory lines of the weapon as well.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.