-
- Holds 10 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for load 2 method of shotgun loading
-
- Holds 16 - 12 gauge shells
- Strong, light weight, great shell retention, smooth release
- Designed for load 4, will also work for the load 2
-
- Holds 24 - 12 gauge shells
- Quaload design, but able to duaload as well.
- Works with TEKLOK (sold separately), TMMS and ELS.
- Articulates at the hip joint, no loss of motion.
- Comes with quick detach leg strap. 2 point attachment, belt and thigh. Remove the rig in seconds.
-
- Works with TEKLOK (sold separately), TMMS and ELS.
- Articulates at the hip joint, no loss of motion.
- Comes with quick detach leg strap. 2 point attachment, belt and thigh. Remove the rig in seconds.
- 3/4" mount spacing allows you to mount TACCOM, Carbon Arms' and Invictus Practical shell holders.
-
- Holds 4 - 12 Gauge Shells
- "Free Hand" style loading
- Easy to achieve several angles
- Compatible with Teklok or ELS (mounting systems SOLD SEPARATELY)
-
- Holds 6 - 12 Gauge Shells
- "Free Hand" style loading
- Easy to achieve several angles
- Compatible with Teklok or ELS (mounting systems SOLD SEPARATELY)
-
- Raises Shell holders by as much as 1.5" on the belt
- Works with all TACCOM shell holders
- Works with Tek-Lok, TMMS and ELS hooks
-
- For .750" diameter barrels
- Steel construction
- Super effective
- Wrench flats provide tight fit
- Angle forward design
- Black Nitride Finish
- 3 oz
- 1/2 28 thread
-
- Stand out in the competition with Patriot Skinz Taccom edition pmag stickers
- Made for M3 .223 PMAG
- 30 round or 40 round option
-
- Drop in assembly
- Low reciprocating mass
- Steel BCG recommended
- Adjustable gas system required
- Both pieces - 2.2oz
- Reciprocating piece - 1.1oz
-
For use with:
- TACCOM LW Carbine Recoil System
- Any Factory Carbine Recoil System
-
For use with:
- TACCOM LW Rifle Recoil System
- TACCOM ALW Rifle Recoil System
- Any Factory Rifle Recoil System
-
- Comes with Spring, T-Nuts and Screws
- AR15 Kit - works w/ Lancer and Magpul magazines
- DOES NOT COME WITH AN EXTENSION
- These kits complete the free downloaded extensions available on our download page
-
- Chrome Silicon Spring
- Carbine length
- Approximately 4 more LBS preload over the milspec carbine spring
- Will also work for PCC as well
-
- 23 or 32 coil option
- 17-2 stainless steel
- Extra power for the 33 round Glock Magazine
- Extra power for +10 extensions
- Will also work on CZ Scorpion Magazines
-
- Keeps your Chest Rig from slipping down during a stage
- Option to direct mount to backer plate
- Works with ALL Taccom Chest Rigs
- Also works with our competitor's chest rigs that use up to 2" wide nylon belts
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 15oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and weld, hard coat anodized aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- Originally made for Mossberg 590 Shockwave and Remington TAC-14
- Can be used as generic handguard grip
- 80 Grit
- Grips made by 3M
-
Sale!
- Made universally for Mossberg 590/590A1 and Remington 870; TAC-14
- 80 Grit
- Made by 3M
-
- Strap made out of nylon
- Attaches to your belt or belt loop for faster access
- Chamber flag made to universally fit all kinds of competition guns
-
- 17-4 stainless steel
- Made for reliable shell feeding
- Works with any tube extension
-
- Machined Aluminium
- Threading fits the standard AR15 platform
- Blowback AR style only! (PCC, 22)
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
- 16” legal length rifle barrel
- Pin and weld aluminum shroud
- Approximately 5.25” effective rifling
- Throated chamber to allow for longer over all length ammunition
- Shroud is hard coat anodized
- HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
-
- Machined Aluminium
- Anodized black
- Made ONLY for Taccom Extreme Extension tubes and/or nuts
-
Sale!
- 7% discounted bundle
- Package comes with
- Machined Delrin Magazine Funnel (will not fit pistol grip model)
- Extended Mag Release Button
- Charge Handle
- Delrin Butt Plate
- Black anodized aluminum 1/2-28 Long Muzzle Brake
- Machined funnel is made to work with both Glock & SR9 mags
-
- Total weight 6oz-8oz
- 4 color options
- Made from extremely tough Lexon (.100” wall thickness)
- See your shells with ease
- Modular system (will work with all TACCOM extension tubes for adding even more rounds)
- Spring & Stabilizer included
- Nuts purchased separately
-
- Push button, locking, belt attachment
- Can mount holsters, shell caddies, mag pouches, you name it!
- Made out of polymer nylon
- Adjustable bar fits belts 1/4" to 2-1/4"
-
- Chrome Silicon Spring
- Improves Cycling and Overall Operation
- Longer service life than round wire springs
- Will NOT fit factory VR80 buffer tube
- Fits commercial buffer tube
- Spring works in carbine and rifle buffer tubes
-
- 6 position carbine tube
- Commercial spec
- 6061-T6 Aluminum
- Black Hardcoat anodize
- Fits the VR80 & AR-9mm
- Comes with Castle Ring and AR15 latch plate
-
- Eliminates the barrel nut/shroud
- Works with short and long VR80 hand guards
- Low profile, does not interfere with sighting
- Makes your hand guard float
- Increased slug accuracy
- Made from 6061 aluminum
- Anodized black
- Installs with ease
-
- 7% discounted bundle
- Package includes:
- VR80 recoil buffer
- VR80 Flat wire spring
- VR80 buffer tube
- Comes in Black
-
- Comes with spring
- Adds 20 more rounds
- Designed for fast, easy cleaning
- Allows for bolt hold open
- Made of delrin
- Machined in house
-
- All aluminum construction
- Black anodized
- Holds 2 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Modular in that you can attach to backer with 2 screws
- Easy set up
-
- Choose compact or spaced quad
- Can be used for dual or quad loading
- Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
- Aluminum construction
- Black anodized
- Holds 8 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Easy set up
- Some assembly required
-
- Replaces read SS screw so that you can adjust for shell length on the fly
- If ordering for 8up, you'll need to add x4 screws
- If ordering for 12up, you'll need to add x6 screws
- If ordering for 16up, you'll need to add x8 screws
-
- Works with the 8up Gemini shell holders
- Assemble 1, 2, 3 or more 8up on the web belt
- Have 8, 16, 24 or 32 rounds on your chest.
- Convenient shoulder strap keeps everything in place
-
- Choose compact or spaced quad
- Can be used for dual or quad loading
- Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
- Aluminum construction
- Black anodized
- Holds 16 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Easy set up
- Some assembly required
-
- Black Neoprene Closed Cell Material
- Raises your cheek weld by ¼”
- Adhesive backed
- Easy installation
- Works with the ‘traditional’ PC carbine stock
-
- Chrome Silicon Spring
- Improves Cycling and Overall Operation
- Traditional Round wire spring
- Fits factory VR80 buffer tube
- Recommended for use with the TACCOM VR80 Recoil buffer
