-
- Strap made out of nylon
- Attaches to your belt or belt loop for faster access
- Chamber flag made to universally fit all kinds of competition guns
-
- Comes with Spring, T-Nuts and Screws
- AR15 Kit - works w/ Lancer and Magpul magazines
- DOES NOT COME WITH AN EXTENSION
- These kits complete the free downloaded extensions available on our download page
-
Sale!
- Originally made for Mossberg 590 Shockwave and Remington TAC-14
- Can be used as generic handguard grip
- 80 Grit
- Grips made by 3M
-
- Both grips are 80 grit
- Made by 3M
- Key Mod comes with 10 pieces (x4 5.5" | x4 3.2" | x2 solid)
- MLOK comes with 10 pieces (x8 4.7" | x2 solid)
-
- Chrome Silicon Spring
- Carbine length
- Approximately 4 more LBS preload over the milspec carbine spring
- Will also work for PCC as well
-
- Designed for carbine buffer tubes
- Light weight
- 3 stage action
- Negates the need for gas tuning
- 1.5 ounce total weight
- Does not come with recoil spring
-
For use with:
- TACCOM LW Rifle Recoil System
- TACCOM ALW Rifle Recoil System
- Any Factory Rifle Recoil System
-
- Drop in assembly
- Low reciprocating mass
- Adjustable recoil spring preload with included spacers
- Steel BCG recommended
- Adjustable gas system required
- Spring NOT INCLUDED
- Both pieces (including spacers) - 2.5oz
- Reciprocating piece - 1oz
-
- Drop in assembly
- Low reciprocating mass
- Steel BCG recommended
- Adjustable gas system required
- Both pieces - 2.2oz
- Reciprocating piece - 1.1oz
-
For use with:
- TACCOM LW Carbine Recoil System
- Any Factory Carbine Recoil System
-
- Designed for carbine buffer tubes
- Light weight
- 3 stage action
- Negates the need for gas tuning
- 1.5 ounce total weight
- Does not come with recoil spring
-
- Drop in assembly
- Low reciprocating mass
- Steel BCG recommended
- Adjustable gas system required
- Both pieces - 1.1oz
- Reciprocating piece - 0.6oz
-
- For .750" diameter barrels
- Steel construction
- Super effective
- Wrench flats provide tight fit
- Angle forward design
- Black Nitride Finish
- 3 oz
- 1/2 28 thread
-
- Stand out in the competition with Patriot Skinz Taccom edition pmag stickers
- Made for M3 .223 PMAG
- 30 round or 40 round option
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
- 6 position carbine tube
- Commercial spec
- 6061-T6 Aluminum
- Black Hardcoat anodize
- Fits the VR80 & AR-9mm
- Comes with Castle Ring and AR15 latch plate
-
- Chrome Silicon Spring
- Improves Cycling and Overall Operation
- Longer service life than round wire springs
- Will NOT fit factory VR80 buffer tube
- Fits commercial buffer tube
- Spring works in carbine and rifle buffer tubes
-
- Chrome Silicon Spring
- Improves Cycling and Overall Operation
- Traditional Round wire spring
- Fits factory VR80 buffer tube
- Recommended for use with the TACCOM VR80 Recoil buffer
-
- 2 stage recoil system
- Aluminum buffer
- Internal 2nd stage, extended plunger
- Reduces felt recoil
- Works with factory recoil spring or modified AR15 carbine spring
- Eliminates coil bind over factory system
- Allows for use with Bolt Hold open
- Does not come with recoil spring**
-
- Adds 5 rounds to the factory 19 round magazine
- Uses factory 19 round spring
- Machined from Delrin
- Easy assembly
- Overlaps the parent magazine and will not come off
-
- Factory 19 round magazine spring
- Works with all VR80 stick magazines
- Works with TACCOM magazine extension
-
- Extends out farther than factory
- Very smooth almost effortless magazine release
- Made out of Delrin
- Uses factory hardware for install
- Available in Black or Blue
-
- Direct replacement
- Works with factory selector levers
- Works with TACCOM extended lever
- Barrel only, use your existing fasteners
- Provides for a shorter throw to disengage the safety
- Works with aftermarket triggers
- May shorten the over-travel on the factory trigger as well.
-
- Longer, wider and taller than factory
- Available in Black or Blue Delrin
- Comes with hardware
- Works on either side of the factory safety barrel
- Easy no gunsmithing install
-
- Ambidextrous design
- Positive non-slip grab
- Will not come out under fire
- Stainless steel hardware
- Non-corrosive stainless steel cross bar
- Machined anodized black aluminum handles w/finger grooves
-
- Eliminates the barrel nut/shroud
- Works with short and long VR80 hand guards
- Low profile, does not interfere with sighting
- Makes your hand guard float
- Increased slug accuracy
- Made from 6061 aluminum
- Anodized black
- Installs with ease
-
- Light Weight 3oz
- Made from 6061 aluminum
- Black anodized
- Threads on barrel
- Brass set screw will not damage barrel threads
- Comes with split retainers
- Hand guard slips over brake for cleaning gas system
- Allows for choke tube removal
-
- 7% discounted bundle
- Package includes:
- VR80 recoil buffer
- VR80 Flat wire spring
- VR80 buffer tube
- Comes in Black
-
- Holds 6 - 12 Gauge Shells
- "Free Hand" style loading
- Easy to achieve several angles
- Compatible with Teklok or ELS (mounting systems SOLD SEPARATELY)
-
- Holds 4 - 12 Gauge Shells
- "Free Hand" style loading
- Easy to achieve several angles
- Compatible with Teklok or ELS (mounting systems SOLD SEPARATELY)
-
- Works with the 8up Gemini shell holders
- Assemble 1, 2, 3 or more 8up on the web belt
- Have 8, 16, 24 or 32 rounds on your chest.
- Convenient shoulder strap keeps everything in place
-
- Choose compact or spaced quad
- Can be used for dual or quad loading
- Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
- Aluminum construction
- Black anodized
- Holds 16 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Easy set up
- Some assembly required
-
- Choose compact or spaced quad
- Can be used for dual or quad loading
- Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
- Aluminum construction
- Black anodized
- Holds 12 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Easy set up
- Some assembly required
-
- Choose compact or spaced quad
- Can be used for dual or quad loading
- Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
- Aluminum construction
- Black anodized
- Holds 8 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Easy set up
- Some assembly required
-
- All aluminum construction
- Black anodized
- Holds 2 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Modular in that you can attach to backer with 2 screws
- Easy set up
-
- Replaces read SS screw so that you can adjust for shell length on the fly
- If ordering for 8up, you'll need to add x4 screws
- If ordering for 12up, you'll need to add x6 screws
- If ordering for 16up, you'll need to add x8 screws
-
- Works with TEKLOK (sold separately), TMMS and ELS.
- Articulates at the hip joint, no loss of motion.
- Comes with quick detach leg strap. 2 point attachment, belt and thigh. Remove the rig in seconds.
- 3/4" mount spacing allows you to mount TACCOM, Carbon Arms' and Invictus Practical shell holders.
-
- Holds 24 - 12 gauge shells
- Quaload design, but able to duaload as well.
- Works with TEKLOK (sold separately), TMMS and ELS.
- Articulates at the hip joint, no loss of motion.
- Comes with quick detach leg strap. 2 point attachment, belt and thigh. Remove the rig in seconds.
-
- Keeps your Chest Rig from slipping down during a stage
- Option to direct mount to backer plate
- Works with ALL Taccom Chest Rigs
- Also works with our competitor's chest rigs that use up to 2" wide nylon belts
-
- Holds 20 - 12 gauge shells
- Strong, light weight, great shell retention, smooth release
- Designed for load 4, will also work for the load 2