-
- Enhances Feeding Reliability
- Stainless Steel
- Removable
- Minimal fitting required upper can be modified with a small file
-
- Designed for carbine buffer tube length
- For use in blow back actions only
- Comes with either Enhanced Carbine Spring or flat wire spring*
- 6.2 ounces
- 3 stage action
- Allows for the BHO to function
- If you need a spacer for a rifle length buffer tube, let us know in the comment section at checkout!
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
Sale!
- Black Nitride finish
- Stainless Steel
- Works only with AR-9mm barrels
- 14.9 ounces
- Works with both Glock and Colt magazines
- "Dog-bone" style key for faster cleaning*
-
- Extended and Larger Diameter
- Aggressive Friction pattern, non-slip
- Machined in house
- Comes with attachment screw
-
- Drop in assembly
- Low reciprocating mass
- Steel BCG recommended
- Adjustable gas system required
- Both pieces - 1.1oz
- Reciprocating piece - 0.6oz
-
- Works with SR9 and Glock Magazines
- Snaps on the Ruger factory stock with no tools
- Makes inserting replacement magazines easy and fast
- Made from Black Delrin
- Stock grip models 19100-19112
- Pistol grip models 19122, 19124, & 19126
- Easy to install
-
Sale!
- Black Nitride finish
- Pivoting Extractor
- Low drag, low weight key
- 13.5oz
- Works with both Glock and Colt magazines*
- Allows for the Bolt hold open to function with a shorter stroked rifle.
- Faster trigger reset
- Comes with longer spacers to help shorten your stroke
- COMPLETE READY TO DROP IN w/firing pin, extractor, key, etc.
-
- Made out of TITANIUM
- No sharp internal corners
- Stress relieved
- Works with Taccom, Faxon, and Surmount bolts
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 15oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and weld, hard coat anodized aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- Black Anodized 6061 Aluminum
- Mounts directly to the barrel
- No loss of zero
- 1/4” lower than the factory rail
- Approximately 3” long
- Picatinney rail spec
- Shipping 5/20
-
- Under 6 ounces
- Lightest, most affordable carbon fiber handguard on the market
- Fire retardant
- Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
- Use's a standard Armorers wrench for installation to the upper receiver
-
- 5 port or 9 port design
- Light weight
- Short brake .7 oz
- Long brake 1.1 oz
- Look under options for thread sizes
- Black anodized aluminum
- Long comp designed to make 14.5” barrel legal
- Please double check your barrel thread before ordering!
-
- Use your trigger finger to engage/disengage safety
- Great for left handed shooters
- Replaces push button safety
- Works on Ruger 10/22 and Ruger PC Carbine
- .312” diameter Stainless safety barrel, delrin levers
- Can be installed while receiver is still in your stock
- Works with factory trigger group
- Check out our installation video below
-
- All variations come with a spring*
- Machined Aluminium and anodized black
- Threaded differently on both sides for a modular set up
- "Kits" variations come with tube of choice, spring, and end cap
- These tubes ONLY work with Taccom Extreme Extension nuts
- Nuts sold separately
-
For use with:
- TACCOM LW Carbine Recoil System
- Any Factory Carbine Recoil System
-
- 4140 steel
- Black Nitride Finish
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- Super fast magazine changes
- Simple installation
- Stainless steel post
- Large button
-
- Less than 4oz
- 1.86” dia
- MLOK slots
- Use with factory rear sight, optic mount or our Rear Optic mount
- Easy installation
- See list below for model fit
-
Sale!
- Installs in seconds without tools
- Eliminates wear on lower receiver
- Improves reliability of Drop-In kits and Dedicated Uppers
- Will NOT work with M&P 15-22
-
- 2 stage recoil system
- Aluminum buffer
- Internal 2nd stage, extended plunger
- Reduces felt recoil
- Works with factory recoil spring or modified AR15 carbine spring
- Eliminates coil bind over factory system
- Allows for use with Bolt Hold open
- Does not come with recoil spring**
-
- Made out of delrin
- Easy to find
- Easy to depress
- Slightly extended
- Comes with hardware for install
-
- Holds 8 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
Sale!
- Made out of Carbon Fiber
- Aluminum barrel nut
- Small diameter for better grip
- 14.5" length
- 6oz total weight
- Adjustable blast shield to be used with short barrels/long brakes
- Works great with ULW barrels
- MLOK slots
- Comes in Black, Green, Blue, Silver, & Red
- Blow back actions only!
-
- Holds 12 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
- Longer, wider and taller than factory
- Available in Black or Blue Delrin
- Comes with hardware
- Works on either side of the factory safety barrel
- Easy no gunsmithing install
-
- Available for 3" or 3.5" shotguns.
- Attaches to lifter with aircraft quality double sided tape
- Eliminates the need to weld the lifter.
- Works with many of the shotguns on the market today
-
- Replaces read SS screw so that you can adjust for shell length on the fly
- If ordering for 8up, you'll need to add x4 screws
- If ordering for 12up, you'll need to add x6 screws
- If ordering for 16up, you'll need to add x8 screws
-
- 23 or 32 coil option
- 17-2 stainless steel
- Extra power for the 33 round Glock Magazine
- Extra power for +10 extensions
- Will also work on CZ Scorpion Magazines
-
Sale!
- Comes with high power extension spring
- Holds up to 56-57 w/ Glock 33 round 9mm magazine
- 10 oz (with factory Glock mag)
- Made from delrin (friction free | brass doesn't rub against metal)
- Easy to assemble and clean
-
- Ambidextrous design
- Positive non-slip grab
- Will not come out under fire
- Stainless steel hardware
- Non-corrosive stainless steel cross bar
- Machined anodized black aluminum handles w/finger grooves
-
- Holds 20 - 12 gauge shells
- Strong, light weight, great shell retention, smooth release
- Designed for load 4, will also work for the load 2
-
- Length of pull from 10.5" to 15”
- Butt Plate adjusts up/down and rotational
- Adjustable cheek riser
- Aluminum/Delrin construction
- Ambidextrous design allows for right or left handed shooters
- "M&P" variation slips over the 15-22 ‘faux’ tube
- "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
-
- Allows your shotgun barrel to float
- Clamps only on the extension tube
- Molded unbreakable Nylon
- Comes with spacers to work with Taccom, Nordic, & RCIXtension tubes
- Will not 'crush' your tube when installing.
-
- Strap made out of nylon
- Attaches to your belt or belt loop for faster access
- Chamber flag made to universally fit all kinds of competition guns
-
Sale!
- Nylon strap
- Strap keeps your hand from slipping off the forearm
- Comes with steel backers for screws
-
Sale!
- 12.2oz
- Comes with forearm
- Accepts standard AR15 hand grips
- Made out of strong delrin
- Accepts standard Ruger 10/22 receivers & similar
- AR hand grip not included
- Choose from Standard AR15 buffer tube extension or picatinny rail for butt stock attachment options
- Will not work with take down models
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
- Chrome Silicon Spring
- Improves Cycling and Overall Operation
- Longer service life than round wire springs
- Will NOT fit factory VR80 buffer tube
- Fits commercial buffer tube
- Spring works in carbine and rifle buffer tubes
-
- 17-4 SS
- Heat Treated to Rc 42
- No Sharp internal corners
- Works with CMMG, Model 1, TACCOM and others
- Will NOT work with M&P 15-22
