• Sale!
    • 1-16 twist match barrel
    • ½ -28 Thread Protector
    • Aluminum slim MLOK handguard
    • Aluminum upper
    • Stainless Steel Bolt

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Taccom ULW barrel
    • 2lb 10oz
    • Aluminum slim MLOK handguard
    • Aluminum upper
    • Stainless Steel Bolt
      • Please allow up to 5 days processing if backordered

    Join the waitlist to be emailed when this product becomes available

    • ULW upper - 2lbs, 40z complete
    • Chambered for 22 long rifle (22LR)
    • 16” ULW barrel (4.5” effective rifling)
    • 1:16 twist rate
    • TACCOM bolt assembly
    • Mil spec charge handle
    • ULW carbon fiber hand guard
    • Works great with Black Dog magazines (not included)
    • Ready to drop on to your AR15 223/5.56 lower
    • MADE PER ORDER....ALLOW ONE WEEK FOR SHIPPING
  • Signature Upper for AR15-9mm

    $349.95$389.95
    • Slick Side Upper
    • Extreme ULW Hand Guard
    • Choice of ULW, XLW, MID-B, or 10/16 barrel
    • 2.5 pounds (with bolt)
    • 9mm bolt sold separately
    • Charge handle not included
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • Chambered for 22 long rifle (22LR)
    • 16” ULW barrel (4.5” effective rifling)
    • 1:16 twist rate
    • TACCOM Bolt assembly
    • Works great with Black Dog magazines (not included)
    • **Threaded ½-28 (3/4” barrel end contour)
    • Will NOT work with M&P 15-22
  • Sale!
    • 16" ULW barrel (5.25" effective rifling)
    • Pin and weld aluminum shroud
    • 15oz
    • Black nitride bolt (extreme short stroke config)
    • Bolt comes with short stroke pads
    • 16” Aluminum Shrouded barrel
    • 5.25” effective 1:10 rifling
    • Super feed barrel (no bolt modification required)
    • Lightweight 13.5oz
    • Replaces factory trunnion block
    • Accepts AR15 hand guards

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 14.5” barrel w/ brake (16.25″ total)
    • Steel brake – pinned/welded
    • 1 lb 6oz
    • 4150cm steel
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • ALLOW UPTO 5 DAYS FOR  ASSEMBLEY
    • 10” effective rifling (16" total length)
    • 1:10” Twist rate
    • Pinned and welded
    • 1lb 3oz
    • Works with any standard 9mm bolt
    • Removable top ramp
    • Hand polished bottom feed ramp
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

    • 13.5” barrel w/ brake (16.25″ total)
    • Steel brake – pinned/welded
    • 1 lb 8oz
    • 4140 steel
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Made out of Flake Carbon Fiber
    • .1” wall thickness
    • Aluminum barrel nut
    • Small diameter for better grip
    • 14.5″ length
    • 6.5 oz total weight 
    • Works great with ULW barrels
    • Blow back actions only!
  • Sale!
    • 4150CM steel
    • Black Nitride Finish
    • Weight: 1lb 4oz
    • Throated chamber to allow for longer OAL length ammunition
    • 1:10 twist rate
    • 1/2-28 threaded end
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any standard 9mm bolts
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
  • Sale!
    • 5” fluted .22RF barrel
    • 1/2-28 threaded end (brake not included)
    • 4150CM material
    • Muzzle flip control lever (right handed shooters)
    • 7.5oz
    • Include a free ambidextrous bolt racker with purchase
    • 10” effective rifling
    • 1:10” Twist rate
    • 1/2-28 thread
    • 13.5oz
    • Works with any standard 9mm bolt
    • Removable top ramp
    • Hand polished bottom feed ramp
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP

    Join the waitlist to be emailed when this product becomes available

    • 13.5” barrel
    • 4140 steel
    • 1/2-28 thread
    • 1lb 1oz
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any 9mm AR bolt on the market today
    • For use with Glock and Colt style lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP

    Join the waitlist to be emailed when this product becomes available

    • 11” or 16” fully rifled barrel 
    • 1:16” twist
    • Chambered for 22 long rifle
    • Threaded ½-28 (3/4” barrel end contour)
    • Will work with CMMG barrel collar (.46 dia spud)
    • Designed to work with TACCOM 22rf bolt assy
    • Will NOT work with M&P 15-22
    • BARREL COLLAR NOT INCLUDED
    • 16” length, 4.5" effective rifling
    • 11oz
    • Barrel collar NOT included
    • Chambered for 22 long rifle (22LR)
    • 1:16 twist rate
    • Pin and weld, (.75" dia) brushed aluminum shroud
    • Designed to be used with CMMG barrel collar (.460 dia spud)
    • Will NOT work with M&P 15-22
  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling) 
    • 14oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and welded aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • 2 port mid-barrel brake
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Made out of Carbon Fiber
    • Aluminum barrel nut
    • Small diameter for better grip
    • 14.5" length
    • 6oz total weight 
    • Adjustable blast shield to be used with short barrels/long brakes
    • Works great with ULW barrels
    • MLOK slots
    • Comes in Black, Green, Blue, Silver, & Red
    • Blow back actions only!
  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
      • Black anodized aluminum 1/2-28 Long Muzzle Brake
    • Machined funnel is made to work with both Glock & SR9 mags

    Join the waitlist to be emailed when this product becomes available

    • 4.5" length
    • 7.5oz
    • Barrel collar NOT included
    • Chambered for 22 long rifle (22LR)
    • 1:16 twist rate
    • Designed to be used with CMMG barrel collar (.460 dia spud)
    • 1/2-28 threaded barrel
    • Will NOT work with M&P 15-22
  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling)
    • 11oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and weld, brushed aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
  • Sale!
    • 16″ legal length rifle barrel (4.5″ rifling)
    • 10oz
    • Pin and weld, brushed aluminum shroud (.75" diameter)
    • 22LR Sport Chamber
    • Uses factory barrel collar, ejector, and roll pins from factory barrel

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 16.25" legal rifle barrel (4.5" rifling) 
    • 10.2oz
    • Drop in for all .920” applications
    • 3/4” diameter pinned and welded aluminum shroud
    • 22LR Sport Chamber
    • Will not work with takedown models
    • 16” legal length rifle barrel
    • Pin and weld aluminum shroud
    • Approximately 5.25” effective rifling
    • Throated chamber to allow for longer over all length ammunition
    • Shroud is hard coat anodized
    • HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
  • Sale!
    • 16” legal length rifle barrel (5.25” effective rifling)
    • 15oz
    • Throated chamber to allow for longer over all length ammunition
    • 1:10 twist rate
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Pin and weld, hard coat anodized aluminum shroud
    • Works with any standard 9mm bolts
    • Supports the front end of glock magazines
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
      • Black anodized aluminum 1/2-28 Short Muzzle Brake
    • Machined funnel is made to work with both Glock & SR9 mag

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • 11oz
    • 13.625" long
    • Aluminum hand guard/nut
    • Black anodized
    • Picatinny top rail
    • MLOK slots
  • Sale!
    • 8.0 oz
    • 4.5” long
    • ½-28 x .5” long thread
    • 22LR Sport Chamber
    • 416 Stainless Steel
    • Will not work with takedown models
    • Length of pull from 10.5" to 15”
    • Butt Plate adjusts up/down and rotational
    • Adjustable cheek riser
    • Aluminum/Delrin construction
    • Ambidextrous design allows for right or left handed shooters
    • "M&P" variation slips over the 15-22 ‘faux’ tube
    • "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
  • Sale!
    • 11.1 oz
    • Comes with 6.8″ forearm
    • Accepts standard AR15 hand grips
    • Made out of strong delrin
    • Accepts standard Ruger 22 Charger pistol receivers & similar
    • AR hand grip not included
    • Choose from Standard AR15 buffer tube extension or picatinny rail for brace attachment options
    • Will not work with take down models
  • Sale!
    • 12.2oz
    • Comes with forearm
    • Accepts standard AR15 hand grips
    • Made out of strong delrin
    • Accepts standard Ruger 10/22 receivers & similar
    • AR hand grip not included
    • Choose from Standard AR15 buffer tube extension or picatinny rail for butt stock attachment options
    • Will not work with take down models
    • 4140 steel
    • Black Nitride Finish
    • Throated chamber to allow for longer OAL length ammunition
    • 1:10 twist rate
    • 1/2-28 threaded end
    • Removable top ramp
    • Hand polished bottom feed ramp
    • Works with any standard 9mm bolts
    • Works with both colt and glock lowers
    • If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
    • Choose compact or spaced quad
    • Can be used for dual or quad loading
    • Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
    • Aluminum construction
    • Black anodized
    • Holds 16 shells
    • Manual hard adjustment for shell length
    • Spring loaded for pressure
    • Easy set up
    • Some assembly required
  • Sale!
    • Air cushioned on the recoil stroke for the last ¾” of travel
    • Buffer weight - 5oz
    • Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
    • Reduces felt recoil and muzzle jump
    • Factory sealed air cushion, no maintenance required
    • Spring loaded cushion softens return stroke
    • Aluminum construction air cushion
    • Custom flat wire spring
    • Short Stroke System, eliminates BHO capabilities.

    Join the waitlist to be emailed when this product becomes available

    • Designed for carbine buffer tube length
    • For use in blow back actions only
    • Comes with either Enhanced Carbine Spring or flat wire spring*
    • 6.2 ounces
    • 3 stage action
    • Allows for the BHO to function
    • If you need a spacer for a rifle length buffer tube, let us know in the comment section at checkout! 
  • Sale!
    • Black Nitride finish
    • Pivoting Extractor
    • Low drag, low weight key
    • 13.5oz
    • Works with both Glock and Colt magazines*
    • Allows for the Bolt hold open to function with a shorter stroked rifle.
    • Faster trigger reset
    • Comes with longer spacers to help shorten your stroke
    • COMPLETE READY TO DROP IN w/firing pin, extractor, key, etc.
    • Holds 24 - 12 gauge shells
    • Quaload design, but able to duaload as well.
    • Works with TEKLOK (sold separately), TMMS and ELS.
    • Articulates at the hip joint, no loss of motion.
    • Comes with quick detach leg strap. 2 point attachment, belt and thigh. Remove the rig in seconds.
    • Choose compact or spaced quad
    • Can be used for dual or quad loading
    • Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
    • Aluminum construction
    • Black anodized
    • Holds 12 shells
    • Manual hard adjustment for shell length
    • Spring loaded for pressure
    • Easy set up
    • Some assembly required
  • Sale!
    • Lightweight 2.0 ounces
    • Black anodized aluminum
    • Allows for red dot sight to be mounted similar in position to the AR15 platform
    • Same height off the barrel as the factory rail
    • Allows for iron sights to be co-witnessed with scope
    • Will not increase folded foot print.
    • Solid mounting with 6 screws
  • Sale!
    • Wide open sights, no clutter
    • AR15 A2 Sight Height (rail height front/rear)
    • .04” or .06” diameter fiber optic front sight
    • Ghost ring rear or Buck Horn rear sight
    • Super light each sight is less than 1 ounce
    • Aluminum riser black anodized
    • Adjustable for windage and elevation
  • Sale!
    • Decrease mag reload times
    • Mag release made out of 6061, black anodized aluminum
    • High density Delrin magazine funnel
    • High density Delrin Bolt Release Extension
    • *Will NOT work with AKV*
    • Bundle includes:
      • ARV Funnel
      • ARV Bolt Release Extension
      • ARV Mag Release

    Join the waitlist to be emailed when this product becomes available

    • Length of pull from 10.5” to 15”
    • Adjustable butt plate and rotational
    • Total weight 9.5 oz
    • Carbon Fiber, Aluminum, and Delrin Construction.
    • Will also work on SIG MPX and MCX
    • This is NOT a buffer tube
  • Sale!
    • Helps reduce felt recoil
    • Decrease mag reload times
    • Bolt release, mag release, & recoil block made out of 6061, black anodized aluminum
    • High density delrin funnel
    • *Will NOT work with ARV*
    • Bundle includes:
      • AKV Funnel
      • AKV Bolt Release
      • AKV Mag Release
      • AKV Recoil Cushion

    Join the waitlist to be emailed when this product becomes available

    • Less than 4oz
    • 1.86” dia
    • MLOK slots
    • Use with factory rear sight, optic mount or our Rear Optic mount
    • Easy installation
    • See list below for model fit
  • Sale!
    • 7% discounted bundle
    • Package comes with
      • Machined Delrin Magazine Funnel (will not fit pistol grip model)
      • Extended Mag Release Button
      • Charge Handle
      • Delrin Butt Plate
    • Machined funnel is made to work with both Glock & SR9 mags

    Join the waitlist to be emailed when this product becomes available

    • Under 6 ounces
    • Lightest, most affordable carbon fiber handguard on the market
    • Fire retardant
    • Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
    • Use's a standard Armorers wrench for installation to the upper receiver
  • Sale!
    • Lightweight, not bulky, fits the Rifle nicely
    • High strength DELRIN polymer
    • Adjustable for Length of Pull
    • Butt Plate can be angled to fit in the ‘pocket’ of your shoulder
    • Butt Plate has an aggressive texture will stay put!
    • Aluminum QD swivel mount installed
    • Comes with Assembly Hardware
    • Retains the factory recoil system
    • 7% discounted bundle
    • Package includes:
      • VR80 recoil buffer
      • VR80 Flat wire spring
      • VR80 buffer tube
    • Comes in Black

    Join the waitlist to be emailed when this product becomes available

    • For .750" diameter barrels
    • Steel construction
    • Super effective
    • Wrench flats provide tight fit
    • Angle forward design
    • Black Nitride Finish
    • 3 oz
    • 1/2 28 thread
    • Holds 20 - 12 gauge shells
    • Strong, light weight, great shell retention, smooth release
    • Designed for load 4, will also work for the load 2
    • Light Weight 3oz
    • Made from 6061 aluminum
    • Black anodized
    • Threads on barrel
    • Brass set screw will not damage barrel threads
    • Comes with split retainers
    • Hand guard slips over brake for cleaning gas system
    • Allows for choke tube removal

    Join the waitlist to be emailed when this product becomes available

  • Sale!
    • Black Nitride finish
    • Stainless Steel
    • Works only with AR-9mm barrels
    • 14.9 ounces
    • Works with both Glock and Colt magazines
    • "Dog-bone" style key for faster cleaning*
    • Black anodized aluminum
    • Adds 8.25” to factory pistol barrel
    • Overlaps factory barrel by .625” for a strong connection
    • Extension weighs 2oz
    • Makes the 1522P barrel a legal 16” rifle barrel 
    • Must be attached permanently per ATF guide lines
    • **Can purchase the extension or send in your 1522P for modification (scroll down to learn more)
    • Minimalist design
    • Standard AR15 buffer tube threads
    • Made from Delrin and Carbon Fiber
    • Designed to work with Ruger 10/22 chassis
    • Straight or angled for use with low mount iron sights
    • Custom made for your specific length of pull (set for 10/22 actions and Taccom 10/22 chassis)
    • This is NOT a buffer tube
    • Holds 16 - 12 gauge shells
    • Strong, light weight, great shell retention, smooth release
    • Designed for load 4, will also work for the load 2
    • Holds 16 - 12 gauge shells
    • Strong, light weight, great shell retention, smooth release
    • Designed for load 2 method of shotgun loading
    • Breacher variation has 3 hardened steel prongs that aid in stabilizing the muzzle for door breaching
    • Breacher variation allows for a ‘gap’ between the end of the muzzle and close target
    • All extensions add one shell to the capacity of the magazine tube in most cases
    • Knurled body allows for easy on/off with no tools
    • All variations come with a spring
    • Machined Aluminium and anodized black
    • Comes with tube of choice, spring, and end cap
    • These tubes ONLY work with Taccom Extreme Extension nuts
    • Nuts sold separately
     
    • Comes with spring
    • Adds 25 more rounds
    • Designed for fast, easy cleaning
    • Allows for bolt hold open
    • Made of delrin
    • Machined in house

    Join the waitlist to be emailed when this product becomes available

Title