- Designed for carbine buffer tube length
- For use in blow back actions only
- Comes with flat wire spring
- 5oz SS buffer assy or 2oz Al buffer assy
- 3 stage action
- Allows for the BHO to function in most case
Sale!
PCC 3 Stage Recoil System for AR15-9mm
Original price was: $149.95.$119.95Current price is: $119.95.
Description
Perfection refined!!! The TACCOM PCC recoil system has evolved to allow your rifle to be flatter AND smoother….along with the benefit of significant felt recoil.
Gone are the traditional round wire springs……We include a flat wire recoil spring that can actually be clipped up to 10 coils to reduce your preload by one pound. Upon recoil, the buffer will come back and hit the 2nd stage using wave springs engineered to slow your bolt down to zero fps and not slam into your buffer tube!! We’ve been offering this particular wave spring some time now, over 2000 out there in use and no known breakage!! (Yeah, we designed a travel limiter) Now, going back into battery, we’ve added a 3rd stage that will keep the shock down from the entire bolt/buffer on the rebound, hitting the backend of your barrel. This cushion is between the bolt and buffer and helps smooth out the entire cycle of the rifle…..the added bounus of the 3rd stage is that it makes for a VERY efficient anti bounce feature!!
TWO VERSIONS AVAILABLE!!!
Our 5 ounce stainless steel buffer assembly is designed to be used with factory powered ammo, for use with or with out a suppressor and barrels lengths up to 16″
Our 2 ounce aluminum buffer is designed LOW POWER LOADS…..mission specific for steel challenge where you are using 120PF loads or under (PF = velocity/bullet weight)
Allows for BHO in most cases!!
Additional information
| BUFFER WEIGHT | 2oz BUFFER ASSY, 5oz BUFFER ASSY |
|---|
18 reviews for PCC 3 Stage Recoil System for AR15-9mm
Only logged in customers who have purchased this product may leave a review.
Phil Underwood (verified owner) –
Works perfect. This is a tried and true setup. Using a QC10 lower and Taccom upper. Highly recommenced. Best setup on the market and price ..A+
Jon (verified owner) –
This buffer system is awesome! It’s works better then all the other system. The recoil impulse is so smooth now, tracking the dot is a breeze.
wagner130 (verified owner) –
This works perfectly, and was easy to install on my Palmetto PCC carbine. I think for the price, it was a good value. I had questions that were answered quickly by the staff, shipping was reasonable and most important, the Buffer does reduce felt recoil.
Mark (verified owner) –
Swapped out another captured buffer system (not JP) and immediately can tell the difference in the recoil impulse. Considering the price and the results, it’s really a great value. With a comp, my PCC is running so flat that I don’t even have to worry so much about managing recoil for the follow-up shots just on movement and transitions.
james johnson (verified owner) –
this works better than any combination i have now
Brad Alsop (verified owner) –
Highly recommended. I am running this recoil system with a QC-10 lower and JP bolt and it functions flawlessly. Additionally, it has a noticeably lower recoil impulse compared to some of my fellow USPSA shooters running different systems.
Craig Fowler (verified owner) –
Installed this in my ATI 9mm PCC and it feels real good . Softened up the felt recoil.. Taccom products are the bomb!!
shadow1 (verified owner) –
Installed this on a Frontier Armory lower with a Taccom ramped barrel and Extreme BCG.
The lower also has a Franklin Armory Binary trigger.
This is the answer to bolt bounce with the BFS lll.
Works great!!
fladings (verified owner) –
Great product
Steel Dragon (verified owner) –
Wow, gone through 3 different buffer systems and finally found what I like. It does help keep the red dot from bouncing a lot and speeds up transitions. It’s a keeper.
Joe C Hoover (verified owner) –
I purchased this recoil system after getting two other brands and while waiting to get a Taccom ramped tension barrel, still waiting for it, but then bought the Taccom ramped Ultra Light weight to try, in the mean while I was trying all of the recoil and buffer set ups with my original barrel. I then put on the ULW Taccom barrel and when I went to put in the buffer system I could not find the internal spring. I called and spoke with Tim and said I wanted to purchase the spring and he said “I won’t sell you the spring, but if you me email your address we will send you one.” I got the replacement spring today and in less than one week, EXCELLENT SERVICE and PRODUCT SUPPORT. Now to get it installed and tested before our monthly steel challenge match this weekend. So far I have the Taccom bolt, ULW barrel with carbon fiber hand guard and now a complete recoil system. Can’t say enough good things about Tim and his company at this time, now if I can cut off 10 or more seconds this weekend!
RETT GOINGS (verified owner) –
Smooth!
Didn’t have a single issue at the range together. This baby makes the recoil in my brace very insignificant. Allowed my LRBHO to work flawlessly without any modification (angstad arms receiver)
Ian (verified owner) –
Works flawlessly with my Stern Defense adapter, PSA BCG and Velocity 3.5 lb trigger. Very flat shooting and very smooth. Best upgrade I ever did with my PCC.
Scott Muller (verified owner) –
Very happy with this purchase. Noticeable drop in recoil from my stock buffer. Much better feel and quicker target acquisition on follow-up shots. I would highly recommend.
Mitchell –
After lots of research I purchased the Taccom 3 stage buffer system for my Quarter Circle 10 lower build, 16 inch BA barrel, VG6 comp, FM9 bolt, Timney PCC trigger. Dropped it in and went to run it in a match with my 132 PF loads. Ran flawlessly, significantly reduced dot bounce and felt recoil. Very pleased with this purchase.
buddyian (verified owner) –
Must have for anyone trying to build an AR9! I wanted to build an AR9 with a binary trigger in it, but found out pretty quick that it wasn’t going to be as easy as a standard ar-15 due to the use of a blowback system rather than a gas system. However, after much research, I decided to run this buffer system along with the taccom 9mm extreme bolt, and let me tell you, my gun runs flawlessly. I have not had any issues with hammer follow or jamming. I’m a big believer in taccoms products now and will definitely use their stuff in my future builds.
Asher B (verified owner) –
Very happy.. fair price+fast shipping.. Great job Taccom!
Frank W. (verified owner) –
Works really well with my EPC-9. Thank you!