TACCOM SRS (SHORT RANGE SIGHT)
- 25% FILL, STD PRINT SPEED
- ABS or PETG filament
- STL FILE, READY FOR 3D PRINTING
- PRINT BOTH FRONT SIGHTS (ONE SHOULD BE CLOSE)
10 ROUND EXTENSION FOR GLOCK 33 ROUND FACTORY MAGS (41 ROUNDS TOTAL)
- 25% FILL, STD PRINT SPEED
- ABS or PETG filament
- STL FILE, READY FOR 3D PRINTING
- PRINT AT 101% OR 102% FOR BEST FIT
- **Spring kits are available as well**
PRINT OUT THIS SPACER AT 100% YOU CAN USE THIS SPACER WITH THE FACTORY SPRING AND GET A TOTAL OF 38 ROUNDS IN YOUR GLOCK 33 ROUND MAGAZINE
10 ROUND EXTENSION FOR LANCER
30 ROUND FACTORY MAGS
- 25% FILL, STD PRINT SPEED
- ABS or PETG filament
- STL FILE, READY FOR 3D PRINTING
- PRINT AT 100% or 101% FOR BEST FIT
- WILL REQUIRE THE USE OF A LONGER SPRING
- DO NOT USE FACTORY FLOOR PLATE…NOT REQ’D
- NO MOD REQ’D TO MAGAZINE!!
- **Spring kits are available as well**
10 ROUND EXTENSION FOR MAGPUL
30 ROUND PMAG
(WILL ALSO WORK ON 20’S AND 40’S TOO)
- 25% FILL, STD PRINT SPEED
- ABS or PETG filament
- STL FILE, READY FOR 3D PRINTING
- PRINT AT 102% or 103% FOR BEST FIT
- WILL REQUIRE THE USE OF A LONGER SPRING
- DO NOT USE FACTORY FLOOR PLATE….NOT REQ’D
- NO MOD REQ’D TO MAGAZINE!!
- **Spring kits are available as well**
10 ROUND EXTENSION FOR THE CZ SCORPION
30 ROUND MAGAZINE
- 25% FILL, STD PRINT SPEED
- ABS or PETG filament
- STL FILE, READY FOR 3D PRINTING
- PRINT AT 100% or 101% FOR BEST FIT
- WILL REQUIRE THE USE OF A LONGER SPRING
- DO NOT USE FACTORY FLOOR PLATE….NOT REQ’D
- NO MOD REQ’D TO MAGAZINE!!
- **Spring kits are available as well**
10 ROUND EXTENSION FOR THE SIG MPX
30 ROUND MAGAZINE
- 25% FILL, STD PRINT SPEED
- ABS or PETG filament
- STL FILE, READY FOR 3D PRINTING
- PRINT AT 100% or 101% FOR BEST FIT
- MAY REQUIRE THE USE OF A LONGER SPRING
- DO NOT USE FACTORY FLOOR PLATE.
- NO MOD REQ’D TO MAGAZINE!!
- GIVES YOU AN EXTRA 10 ROUNDS WITH FACTORY SPRING!!!
8 ROUND EXTENSION FOR THE COLT PATTERN 9MM
32 ROUND MAG
- 25% FILL, STD PRINT SPEED
- ABS or PETG filament
- STL FILE, READY FOR 3D PRINTING
- PRINT AT 101% or 102% FOR BEST FIT
- USE FACTORY FLOOR PLATE.
- NO MOD REQ’D TO MAGAZINE!!
- GIVES YOU AN EXTRA 8 ROUNDS WITH FACTORY SPRING!!!
BOLT RELEASE BUTTON BASE
- USE 3M DOUBLE SIDE TAPE
- 25% FILL, STD PRINT SPEED
- ABS or PETG filament
- STL FILE, READY FOR 3D PRINTING
- PRINT WITH SIDE BUTTON
- PLAY WITH SIZE PERCENTAGE
BOLT RELEASE BUTTON
- 25% FILL, STD PRINT SPEED
- ABS or PETG filament
- STL FILE, READY FOR 3D PRINTING
- PRINT WITH BUTTON BASE
- PLAY WITH SIZE PERCENTAGE
+10 RD EXT. FOR HEXMAG MAGAZINES
- .30MM MAX LAYER THICKNESS
- 50% FILL MINIMUM
- STD PRINTING SPEED
- MAY WORK WITH FACTORY SPRING
- ISMI SPRING RECOMMENDED
- .STL FILE, READY FOR 3D PRINTING
SHOT SHELL STAGE SAVER
- .20MM MAX LAYER THICKNESS
- 50% FILL MINIMUM
- STD PRINTING SPEED
- .STL FILE, READY FOR 3D PRINTING
SHOT SHELL STAGE SAVER 2 (2 shells)
- .20MM MAX LAYER THICKNESS
- 50% FILL MINIMUM
- STD PRINTING SPEED
- .STL FILE, READY FOR 3D PRINTING
EXTENSION TUBE CLAMP
- WORKS WITH ALL NORDIC EXTENSION TUBES
- 50% FILL, STD PRINT SPEED
- REMOVE ANTI WARP TABS WHEN PRINT IS COMPLETE
- STL FILE, READY FOR 3D PRINTING
SHELL CADDY SIDE A
- FOR 12 GAUGE SHELLS
- FITS ON TEKLOC
- 25% FILL, STD PRINT SPEED
- ABS or PETG filament
- STL FILE, READY FOR 3D PRINTING
- PRINT WITH SIDE B
SHELL CADDY SIDE B
- FOR 12 GAUGE SHELLS
- FITS ON TEKLOC
- 25% FILL, STD PRINT SPEED
- ABS or PETG filament
- STL FILE, READY FOR 3D PRINTING
- PRINT WITH SIDE A
BETTER MAG ADPATOR MODIFICATION
- SIMPLE MOD TO ALLOW THE BOONIE PACKER BETTER MAG ADAPTOR WORK WITH TACCOM BOLT ASSEMBLIES
- JPEG FILE
AIR SOFT MACHINE GUN
- USES A 20 OUNCE WATER BOTTLE
- FILL 1/4 – 1/3 FULL W/ AIRSOFT BB’S
- SQUEEZE BOTTLE TO SHOOT BB’S
- POSSIBLE TO HOOK UP SHOP AIR
- 25% FILL, STD PRINT SPEED
- STL FILE, READY FOR 3D PRINTING
