- Developed specifically for the JP Enterprises JP5 carbine
- Air cushioned on the recoil stroke for the last 1” of travel
- Wave spring enhances the 2nd stage to further reduce felt recoil and muzzle rise
- MUST BE USED with an A5 length buffer tube
- Buffer weight – 1oz
- Factory sealed air cushion, no maintenance required
- Aluminum construction air cushion
- Custom flat wire spring
- Allows for the use of BHO and LBHO
JP5 Enhanced PCC 3 Stage Air Cushion Recoil System AR-9mm
$159.95 – $199.95
Description
We’ve taken our softest, fastest recoil system and adapted it for the JP Enterprises JP5 using an A5 buffer tube. And wow…..it makes a difference!!! Weve got videos up on YouTube: https://www.youtube.com/watch?v=pq_1YJSNpmU
This particular sytem is designed and meant to be used for the JP5 with an A5 buffer tube and not a normal blowback AR9……if you are looking for that system, here is the link: https://taccom3g.com/product/enhanced-pcc-3-stage-air-cushion-recoil-system-ar-9mm/
Turns out that the more you can slow the bolt/buffer mass before the end of the recoil stroke…..the less recoil is felt and muzzle rise can almost be eliminated. To that end, we’ve added a massive wave spring to our air cushion to further slow down this mass with amazing results!! Charging the weapon is smooth, no initial ‘hard to charge’ as seen with delayed recoil systems yet this system is overall smoother to operate. This is basically a drop in unit and no adjustment is actually required. At most, if you are shooting sub minor power factor loads, trimming the flat wire spring is an option as on flat wire springs you can fine tune the initial preload of the system.
After much consideration, we decided to make our cushion to our own tolerances to come up with an affordable solution for using the air to cushion the blow. In house testing proved that we could cycle more (and faster) with no degradation of pressure, zero air loss over the entire stroke of the piston. We assemble this piston in house using a special light weight oil that lubricates in the metal and it stays there. Of course, we anodize the housing for additional wear protection as well.
So why this recoil system? This is a system that you will be able to use for years and years, before having to worry about anything remotely wearing out. We also utilize a flat wire recoil spring that is also designed to last for many for cycles than the current mil-spec recoil spring. The Taccom PCC 3 Stage Air Cushion Recoil System for the JP Enterprises JP5 is a total “drop in and forget” system as you know it will service you for a very long time.
Additional information
Variation | Recoil System, Recoil System with American Defense A5 Buffer Tube |
---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.