- Light weight Aluminum charge handle
- .25” longer than factory
- KIDD Innovative Stainless Steel Guide Rod
- KIDD Innovative Recoil spring pack
Taccom’s new, inovative 22 products is aimed to give you the advantage over the competition.
-
-
- Barrel weight - 11oz
- Chambered for 22 long rifle (22LR)
- 16” ULW barrel (4.5” effective rifling)
- 1:16 twist rate
- TACCOM Bolt assembly
- Works great with Black Dog magazines (not included)
-
- ULW upper - 2lbs, 40z complete
- Chambered for 22 long rifle (22LR)
- 16” ULW barrel (4.5” effective rifling)
- 1:16 twist rate
- TACCOM bolt assembly
- Mil spec charge handle
- ULW carbon fiber hand guard
- Works great with Black Dog magazines (not included)
- Ready to drop on to your AR15 223/5.56 lower
-
Sale!
- Adapter for the most popular micro dots
- 6061 aluminum black anodized
- .155” thick
- Uses factory hardware
- Easy installation
- Pick the plate for your red dot
- Plate #1 - Trijicon, Holosun 407c, 507c
- Plate #2 - Vortex Venom, Viper, Burris Fastfire, EOtech MRDS
- Plate #3 - C-More, Vortex Razor, Romeo 3, Delta optical
-
Sale!
- 5” fluted .22RF barrel
- 1/2-28 threaded end (brake not included)
- 4150CM material
- Muzzle flip control lever (right handed shooters)
- 7.5oz
- Include a free ambidextrous bolt racker with purchase
-
Sale!
- 6061 material
- Silver finish
- Lowest possible mounting
- Just over 4oz with stripped optic
- Stainless hardware
- Includes a free ambidextrous side bolt racker with purchase!
-
Sale!
- Complete 22WMR upper
- Stainless Steel 17” barrel
- NiB bolt assembly
- Comes with charge handle
- 3 pounds 9 ounces
- Buffer limiter pad
- Attaches to any Standard AR15 (223) lower
- Uses Black Dog 22WMR magazines
- Black, Blue, Red or silver extreme ULW Hand Guard
-
Sale!
- Stainless Steel 17” barrel
- NiB bolt assembly
- Buffer limiter pad
- Installs in to any Standard AR15 (223) upper
- Works with any Standard AR15 Hand Guard
- Uses any Standard AR15 charge handle
- Uses Black Dog 22WMR magazines
-
Sale!
- 7.2oz
- 4.5” long
- ½-28 x .5” long thread
- 22LR Sport Chamber
- Will not work with takedown models
-
Sale!
- Black anodized aluminum
- Light weight
- Picatinney rail mount
- Compression fit on barrel
- Set same height as receiver rail
-
- 4.5" length
- 7.5oz
- Barrel collar NOT included
- Chambered for 22 long rifle (22LR)
- 1:16 twist rate
- Designed to be used with CMMG barrel collar (.460 dia spud)
- 1/2-28 threaded barrel
- Will NOT work with M&P 15-22
-
Sale!
- Mounts the 510C sight closer to bore
- Remove up to 4 ounces off the 510C
- Works on factory Ruger Receivers
- Comes with hardware to mount to receiver
- Black Anodized Aluminum
-
Sale!
- Light weight aluminum
- Black anodize
- Front riser clamps on barrel
- Fits .750 and .920 diameter barrels
- Rear riser designed for factory Ruger receiver
- Dove tail slots to accept Ruger factory iron sights
- Rear riser allows for multiple positions
- Comes with hardware
- Sights not included
-
Sale!
- Ambidextrous function
- Aluminum construction
- Black anodized
- Drop in fit
-
- Made for 22 competition
- Spring engineered to our spec, reduced power
- designed to be used with shorter barrels
- recommended to be used with our ULW barrel
-
- Length of pull from 10.5" to 15”
- Butt Plate adjusts up/down and rotational
- Adjustable cheek riser
- Aluminum/Delrin construction
- Ambidextrous design allows for right or left handed shooters
- "M&P" variation slips over the 15-22 ‘faux’ tube
- "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
-
Sale!
- 16″ legal length rifle barrel (4.5″ rifling)
- 10oz
- Pin and weld, brushed aluminum shroud (.75" diameter)
- 22LR Sport Chamber
- Uses factory barrel collar, ejector, and roll pins from factory barrel
-
Sale!
- Length of pull from 10.5” to 15”
- Adjustable butt plate and rotational
- Total weight 9.5 oz
- Carbon Fiber, Aluminum, and Delrin Construction.
- Will also work on SIG MPX and MCX
- This is NOT a buffer tube
-
- Use your trigger finger to engage/disengage safety
- Great for left handed shooters
- Replaces push button safety
- Works on Ruger 10/22 and Ruger PC Carbine
- .312” diameter Stainless safety barrel, delrin levers
- Can be installed while receiver is still in your stock
- Works with factory trigger group
- Check out our installation video below
-
Sale!
- 11.1 oz
- Comes with 6.8″ forearm
- Accepts standard AR15 hand grips
- Made out of strong delrin
- Accepts standard Ruger 22 Charger pistol receivers & similar
- AR hand grip not included
- Choose from Standard AR15 buffer tube extension or picatinny rail for brace attachment options
- Will not work with take down models
