- 16” legal length rifle barrel
- Pin and weld aluminum shroud
- Approximately 5.25” effective rifling
- Throated chamber to allow for longer over all length ammunition
- Shroud is hard coat anodized
- Optional foam hand guard w/ locking nut combo
- Foam hand guard WILL NOT get hot from barrel shroud
- HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
Taccom’s new, inovative 9mm pcc products is aimed to give you the advantage over the competition.
-
-
- 14.5” barrel
- 1/2-28 thread
- 1 lb 4oz
- 4140 steel
- Patent pending extreme feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
-
- 16” legal length rifle barrel
- Pin and weld aluminum shroud
- Shroud is hard coat anodized
- Flame pattern option available
- Approximately 5.25” effective rifling
- 15oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- PATENT PENDING Multi angle extreme feed ramp
- Supports the front end of glock magazines
- Will work with any AR-9mm bolts
- Works with both colt and glock lowers
- HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
- Shipping 12/21
-
- 4140 steel
- Black Nitride Finish
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- PATENT PENDING Extreme Feed ramp
- Will work with any AR-9mm bolts
- Works with both colt and glock lowers
- Shipping 12/21
-
- 2lb 15oz
- Complete with Extreme 9mm Bolt
- Extruded Aluminum upper
- Throated chamber to allow for longer OAL ammunition
- 5.25" effective rifling - 16" pinned and welded aluminum shroud
- 16" Extreme Feed Ramped barrel PATENT PENDING
- Works with both colt and glock lowers
- 14” Carbon Fiber Hand guard
- Flame pattern option available
-
- For carbine buffer tubes only
- For use in blow back actions only
- Comes with TACCOM Rifle spring
- Comes with Return Cushion
- 6.2 ounces
- 3 stage action
- Allows for the BHO to functioin
-
- Easy installation
- Replaces front cushion
- Uses a #25 wave spring
- Made out of Delrin
- May come in different colors, performance is the same
- Shortens Buffer stroke
- Less dot bounce
- Smoother impulse
- Works only with our PCC adjustable recoil system
- Bolt hold open will NOT function using this kit
-
- Made out of 17-4 stainless steel
- Heat treated to Rc 42
- No sharp internal corners
- Stress relieved
- Works with Taccom, Faxon, and Surmount bolts
-
- Nickel Boron Coating
- Pivoting Extractor
- Works with ramped and standard non ramped barrels.
- Low drag, low weight key
- 14.4oz
- Works with both Glock and Colt magazines
-
- Black Nitride finish
- Works only with standard 9mm barrels (non ramped)
- 14.9 ounces
- Works with both Glock and Colt magazines
- Upgraded key is 80% lighter and less likely to break off
-
- 100% Extruded Upper
- NO dust cover and NO forward assist
- Works with .22, 9mm, and .223 applications
- 10oz
-
- 18oz
- Tensioned Carbon Fiber sleeve
- 4140 barrel
- ½-28 thread
- 16.0” barrel
-
Sale!
- Tensioned aluminum sleeve
- 4140 barrel
- ½-28 thread
- Aluminum easy clean brake
- 16.0” barrel (17” overall)
- 1lb 6oz
-
Sale!
- 9mm Feather Weight Upper (3.2 pounds)
- Complete upper with STD TACCOM bolt
- Slick side Aluminum upper
- 16” tensioned non-ramped barrel, aluminum shroud
- Throated chamber to allow for longer OAL ammunition
- 14” Carbon Fiber Hand Guard
-
- Machined Aluminium
- Threading fits the standard AR15 platform
- Blowback AR style only! (PCC, 22)
-
- 100% foam
- 10 inches in length
- 1" internal diameter
- The ultimate light weight solution!
-
- Under 6 ounces
- Lightest and most affordable carbon fiber handguard on the market
- Works with blowback action AR15 (examples: PCC & 22RF)
- G10 is fire retardant
- Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
- Use's a standard Armorers wrench for installation to the upper receiver
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
- ½-28, ½-36 or 13.5x1LH
- Designed to be pinned and welded to make legal 16” barrels
- Available in MID BRAKE DESIGN or NO BRAKE
- Lightweight Aluminum shroud that is permanently attached to a Stainless Steel Muzzle Device
- Available in overall lengths up to 12 3/8”
- Note length of extension when ordering
- Ranges from 5 oz - 8.5 oz
-
- Steel Brake - Black Nitride Finish
- 2.8oz
- 3 1/8” long
- 5/8-24 Thread (Works for 9mm AND .308 Calibers)
- Will work with the SIG MPX Carbine Barrel
