-
Sale!
- TACCOM Super Feed Barrel (10 ounces)
- 1:10” Twist rate
- 13.5" Segmented Rail Aluminum Hand Guard (10 ounces)
- TACCOM Std. 9mm Bolt (13.5 ounces)
- Std Mil Spec Charge handle
- Lightened Enhanced Air Cushion Recoil System
- Complete Upper Weight w/bolt: 2lb - 15oz
- shipping 6/8/26
-
- Slick Side Upper
- Aluminum Hand Guard
- ULW brushed aluminum shrouded barrel (4.5" effective length)
- 2.3 pounds
- Complete upper ready to attach to your AR15 lower.
- .....SHIPPING JUNE 8TH, 2026.....
-
- Slick Side Upper
- Extreme ULW Hand Guard
- Choice of ULW, 1016, 1316, 16" BARRELS
- CARBON COLOR IS BLACK
- 9mm bolt sold separately
- Charge handle not included
-
Out of stock
- 16” Carbon Fiber shrouded barrel
- 5.25” effective 1:10 rifling
- Super feed barrel (no bolt modification required)
- Lightweight 13.5oz
- Replaces factory trunnion block
- STARTING TO SHIP ON MAY 14TH, 2025
-
- Air cushioned on the recoil stroke for the last 1” of travel
- Wave spring enhances the 2nd stage to further reduce felt recoil and muzzle rise
- Designed to be used with the A5 length buffer tube
- Buffer weight – 5oz
- Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
- Factory sealed air cushion, no maintenance required
- Spring loaded 3rd stage cushion softens return stroke
- Aluminum construction air cushion
- Custom flat wire spring
- Short Stroke System, eliminates BHO capabilities in some cases
- Not for use with Colt mag fed lowers
- Also designed to work with the S&W Response.
-
- Developed specifically for the JP Enterprises JP5 carbine
- Air cushioned on the recoil stroke for the last 1” of travel
- Wave spring enhances the 2nd stage to further reduce felt recoil and muzzle rise
- MUST BE USED with an A5 length buffer tube
- Buffer weight – 1oz
- Factory sealed air cushion, no maintenance required
- Aluminum construction air cushion
- Custom flat wire spring
- Allows for the use of BHO and LBHO
- SHIPPING 01/31/25
-
Sale!Out of stock
- 16" legal rifle barrel (4.5" effective rifling)
- 1:16 rate of twist
- Pinned and welded aluminum shroud
- 3 port mid brake
- 11.5 ounces
- works with TRACKER or CMMG collar
-
Sale!Out of stock
- 16” legal length rifle barrel (5.25” effective rifling)
- 14oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Removable bottom feed ramp
- Pin and welded aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- 2 port mid-barrel brake
- We assemble these barrels per order and typically shipped within one week.
-
Out of stock
- 13.5” barrel
- 4150cr steel
- 1/2-28 thread
- 1lb 1oz
- Removable top ramp
- Removable bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- SHIPPING 01/24/25
-
Out of stock
- 13.5” barrel w/ brake (16.25″ total)
- Steel brake – pinned/welded
- 1 lb 4oz
- 4150CR steel
- Removable ramps
- Hand polished chamber entry
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- We assemble these barrels per order and typically shipped within one week.
-
Sale!Out of stock
- 4150CM steel
- Black Nitride Finish
- Weight: 1lb 4oz
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- SHIPPING 01/24/25
-
- 11” or 16” fully rifled barrel
- 1:16” twist
- Chambered for 22 long rifle
- Threaded ½-28 (3/4” barrel end contour)
- Will work with CMMG barrel collar (.46 dia spud)
- Designed to work with TACCOM 22rf bolt assy
- Will NOT work with M&P 15-22
- BARREL COLLAR NOT INCLUDED
-
Sale!
- 8” effective rifling (16" total length)
- 1:10” Twist rate
- Pinned and welded
- stainless steel coupler (brake to barrel)
- 1lb 0oz (16 ounces)
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
- 2 port brake design
- Unique Carbon fiber brake is pinned and cover welded to make a legal 16" rifle barrel
- We assemble these barrels per order and typically shipped within one week.
-
Sale!
- 8.5” effective rifling
- 1:10” Twist rate
- 1/2-28 thread
- 12.3oz
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
-
- 16.25" legal rifle barrel (4.5" rifling)
- 10.2oz
- Drop in for all .920” applications
- 7/8" Black Carbon Fiber Shroud (pinned and cover welded)
- 22LR Sport Chamber
- Will not work with takedown models
- SHIPPING 12/12/25
-
Sale!
- 10” effective rifling
- 1:10” Twist rate
- 1/2-28 thread
- 13.5oz
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
-
Sale!
- 16.25" legal rifle barrel (4.5" rifling)
- 10.2oz
- Drop in for all .920” applications
- 416SS steel barrel
- 3/4” diameter pinned and welded carbon fiber shroud
- 22LR Sport Chamber
- Will not work with takedown models
- SHIPPING 12/12/25
-
Sale!
- 10” effective rifling (16" total length)
- 1:10” Twist rate
- Pinned and welded
- stainless steel coupler (brake to barrel)
- 1lb 1.0oz (17 ounces)
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
- 2 port brake design
- Unique Carbon fiber brake is pinned and cover welded to make a legal 16" rifle barrel
- We assemble these barrels per order and typically shipped within one week.
-
Sale!Out of stock
- Made out of BLACK Carbon Fiber
- Aluminum barrel nut
- Small diameter for better grip
- 14.5" length
- 6oz total weight
- Works great with ULW barrels
- MLOK slots
- Blow back actions only!
-
Sale!Out of stock
- 8.0 oz
- 4.5” long
- ½-28 x .5” long thread
- 22LR Sport Chamber
- 416 Stainless Steel
- Will not work with takedown models















