- 16” Carbon Fiber shrouded barrel
- 5.25” effective 1:10 rifling
- Super feed barrel (no bolt modification required)
- Lightweight 13.5oz
- Replaces factory trunnion block
- STARTING TO SHIP ON MAY 14TH, 2025
-
Out of stock
-
Sale!Out of stock
- 8 position, extended buffer tube (A5)
- 3/4" spacer w/wave spring
- Adds a 2nd stage to your recoil system....or enhances the 2nd stage you already have
- 5 ports to allow excess water and gas to escape the operating system
- Machined from 7075-T6 Aluminum with a durable hard coat anodized finish
- Works with MBX, KynSHOT, Mil Spec buffers and more
- will not work with JP-SCS or any 'cartdrige style recoil systems
-
Sale!
- Use your trigger finger to engage/disengage safety
- Great for left handed shooters
- Replaces push button safety
- Works on Ruger 10/22 and Ruger PC Carbine
- .312” diameter Stainless safety barrel, delrin levers
- Can be installed while receiver is still in your stock
- Works with factory trigger group
- Check out our installation video below
-
Sale!Out of stock
- 8 position, extended buffer tube
- Compatible with the A5 Buffer System
- 5 ports to allow excess water and gas to escape the operating system
- Machined from 7075-T6 Aluminum with a durable hard coat anodized finish
-
- Completely replaces the factory bolt release
- Extended out and back
- Made out of 6061 aluminum
- Black anodized
- *Will NOT work with ARV*
-
- 3/4” aluminum cushion
- 25# wave spring, .62” travel
- Designed for the S&W Response using the TACCOM adjustable 9mm buffer
- Will also work with the TACCOM ESSB Bolt and the TACCOM adjustable 9mm buffer combination
- Includes (2) optional 3/8” spacers, aluminum cushion and wave spring
-
- works with the 9MM FPC only
- Replaces factory end plug
- Helps reduce felt recoil
- Delrin (polymer) construction
- Allows for BHO to function
- Easy installation
-
Sale!Out of stock
- works on the 9mm, 10mm and 40sw FPC
- Lightweight, not bulky, fits the Rifle nicely
- High strength DELRIN polymer
- Adjustable for Length of Pull
- Butt Plate can be angled to fit in the ‘pocket’ of your shoulder
- Butt Plate has an aggressive texture will stay put!
- Aluminum QD swivel mount installed
- Comes with Assembly Hardware
- Retains the factory recoil system
- SHIPPING 3/27/26
-
Out of stock
- Under 6 ounces
- Lightest, most affordable carbon fiber handguard on the market
- Fire retardant
- Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
- Use's a standard Armorers wrench for installation to the upper receiver
-
- Length of pull from 10.5" to 15”
- Butt Plate adjusts up/down and rotational
- Adjustable cheek riser
- Aluminum/Delrin construction
- Ambidextrous design allows for right or left handed shooters
- "M&P" variation slips over the 15-22 ‘faux’ tube
- "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
-
- Strap made out of nylon
- Attaches to your belt or belt loop for faster access
- Chamber flag made to universally fit all kinds of competition guns
-
- Air cushioned on the recoil stroke for the last 1” of travel
- Wave spring enhances the 2nd stage to further reduce felt recoil and muzzle rise
- Designed to be used with the A5 length buffer tube
- Buffer weight – 5oz
- Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
- Factory sealed air cushion, no maintenance required
- Spring loaded 3rd stage cushion softens return stroke
- Aluminum construction air cushion
- Custom flat wire spring
- Short Stroke System, eliminates BHO capabilities in some cases
- Not for use with Colt mag fed lowers
- Also designed to work with the S&W Response.
-
Sale!Out of stock
- Black Nitride finish
- Pivoting Extractor
- Low drag, low weight key
- 13.5oz
- Works with both Glock magazines*
- Allows for the Bolt hold open to function with a shorter stroked rifle.
- Faster trigger reset
- Comes with longer spacers to help shorten your stroke
- COMPLETE READY TO DROP IN w/firing pin, extractor, key, etc.
- SHIPPING DEC. 10, 2025
-
Out of stock
- Mil spec Extractor
- Polished to promote smooth feeding
-
Sale!Out of stock
- Made out of BLACK Carbon Fiber
- Aluminum barrel nut
- Small diameter for better grip
- 14.5" length
- 6oz total weight
- Works great with ULW barrels
- MLOK slots
- Blow back actions only!
-
Out of stock
- Made out of TITANIUM
- No sharp internal corners
- Stress relieved
- Works with Taccom, Faxon, and Surmount bolts
-
- Chrome Silicon Spring
- Improves Cycling and Overall Operation
- Longer service life than round wire springs
- Spring works in carbine and rifle buffer tubes
-
Sale!
- Steel blade, black oxide coated
- Comes with green and red fiber optic
- Mil spec A2 sight height
- .06" diameter fiber optic front sight
-
- Black anodized 6061 Aluminum
- Mounts directly to barrel
- Picatinny Rail Spec
- Same Height as Rear Factory Rail
- Allows for use of detachable iron sights
- Uses factory screws to mount
- Designed to only work with rear factory rail
-
Sale!Out of stock
- Black anodized aluminum
- Light weight
- Picatinney rail mount
- Compression fit on barrel
- Set same height as receiver rail
