- Length of pull from 10.5" to 15”
- Butt Plate adjusts up/down and rotational
- Adjustable cheek riser
- Aluminum/Delrin construction
- Ambidextrous design allows for right or left handed shooters
- "M&P" variation slips over the 15-22 ‘faux’ tube
- "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
-
-
Sale!
- Black anodized aluminum
- Light weight
- Picatinney rail mount
- Compression fit on barrel
- Set same height as receiver rail
-
- Cleans out lead and poly coated build up from rounds over time
- Made out of steel
- Attachable to a drill
- PCC option WILL NOT work with XLW barrel
-
- Slick Side Upper
- Extreme ULW Hand Guard
- Choice of ULW, CE, 1016, 1316, 16" BARRELS
- CARBON COLOR IS BLACK
- 9mm bolt sold separately
- Charge handle not included
-
Sale!
- 4140 steel
- Black Nitride Finish
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 10oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Remoable bottom feed ramp
- Blind Pinned and welded Carbon Fiber Shroud (BATF Compliant)
- Black, Red, Green or Silver Shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 10oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Removable bottom feed ramp
- Pin and welded, brushed aluminum shroud
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- Works with any standard 9mm bolt…..to use the ‘super feed’ option (top ramp) you have a choice of using a TACCOM 9mm bolt, or you can send in your bolt and $10.00 (to cover shipping back to you). This is a typical 2 day turn around in our shop. This modification will not weaken your bolt.
- The super feed option is just that....an option, it may not be needed. The bottom feed ramp should be used and WILL work with any bolt without modification
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 15oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and weld, hard coat anodized aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 11.62” long
- 4oz
- 1/2-28 thread
- Unfinished aluminum
- End user to attach per ATF guide lines if wanting a legal 16” rifle barrel
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 14oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Removable bottom feed ramp
- Pin and welded aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- 2 port mid-barrel brake
- We assemble these barrels per order and typically shipped within one week.
-
Sale!
- 10” effective rifling
- 1:10” Twist rate
- 1/2-28 thread
- 13.5oz
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
-
Sale!
- 8.5” effective rifling
- 1:10” Twist rate
- 1/2-28 thread
- 12.3oz
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
-
Sale!
- TACCOM Carbon Extreme Barrel
- 5.25” effective rifling
- 1:10” Twist rate
- 13.625 Full Rail Aluminum Hand Guard
- bolt & charge handle not included
- 28 ounces
-
- 13.5” barrel
- 4150cr steel
- 1/2-28 thread
- 1lb 1oz
- Removable top ramp
- Removable bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- SHIPPING 01/24/25
-
Sale!
- 4150CM steel
- Black Nitride Finish
- Weight: 1lb 4oz
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- SHIPPING 01/24/25
-
Sale!
- 10” effective rifling (16" total length)
- 1:10” Twist rate
- Pinned and welded
- stainless steel coupler (brake to barrel)
- 1lb 1.0oz (17 ounces)
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
- 2 port brake design
- Unique Carbon fiber brake is pinned and cover welded to make a legal 16" rifle barrel
- We assemble these barrels per order and typically shipped within one week.
- shipping 01/28/25
-
Sale!
- 8” effective rifling (16" total length)
- 1:10” Twist rate
- Pinned and welded
- stainless steel coupler (brake to barrel)
- 1lb 0oz (16 ounces)
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
- 2 port brake design
- Unique Carbon fiber brake is pinned and cover welded to make a legal 16" rifle barrel
- We assemble these barrels per order and typically shipped within one week.
-
- 13.5” barrel w/ brake (16.25″ total)
- Steel brake – pinned/welded
- 1 lb 4oz
- 4150CR steel
- Removable ramps
- Hand polished chamber entry
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- We assemble these barrels per order and typically shipped within one week.
- shipping 01/28/25
-
- Designed for carbine buffer tube length
- For use in blow back actions only
- Comes with either Enhanced Carbine Spring or flat wire spring*
- 6.2 ounces
- 3 stage action
- Allows for the BHO to function
- If you need a spacer for a rifle length buffer tube, let us know in the comment section at checkout!
-
Sale!
- 8 position, extended buffer tube (A5)
- 3/4" spacer w/wave spring
- Adds a 2nd stage to your recoil system....or enhances the 2nd stage you already have
- 5 ports to allow excess water and gas to escape the operating system
- Machined from 7075-T6 Aluminum with a durable hard coat anodized finish
- Works with MBX, KynSHOT, Mil Spec buffers and more
- will not work with JP-SCS or any 'cartdrige style recoil systems
