- Comes with Spring, T-Nuts and Screws
- AR15 Kit - works w/ Lancer and Magpul magazines
- DOES NOT COME WITH AN EXTENSION
- These kits complete the free downloaded extensions available on our download page
-
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 15oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and weld, hard coat anodized aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- Strap made out of nylon
- Attaches to your belt or belt loop for faster access
- Chamber flag made to universally fit all kinds of competition guns
-
- Machined Aluminium
- Threading fits the standard AR15 platform
- Blowback AR style only! (PCC, 22)
-
- 16” legal length rifle barrel
- Pin and weld aluminum shroud
- Approximately 5.25” effective rifling
- Throated chamber to allow for longer over all length ammunition
- Shroud is hard coat anodized
- HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
-
Sale!
- 7% discounted bundle
- Package comes with
- Machined Delrin Magazine Funnel (will not fit pistol grip model)
- Extended Mag Release Button
- Charge Handle
- Delrin Butt Plate
- Black anodized aluminum 1/2-28 Long Muzzle Brake
- Machined funnel is made to work with both Glock & SR9 mags
-
- Use your trigger finger to engage/disengage safety
- Great for left handed shooters
- Replaces push button safety
- Works on Ruger 10/22 and Ruger PC Carbine
- .312” diameter Stainless safety barrel, delrin levers
- Can be installed while receiver is still in your stock
- Works with factory trigger group
- Check out our installation video below
-
- Black anodized 6061 Aluminum
- Mounts directly to barrel
- Uses factory screws to mount
- ¼” lower than factory rail
- Allows for use of detachable iron sights
- Leaves the factory rail clear for mounting a red dot sight
- Picatinny Rail Spec
- Front and rear rail are at the same height off the bore
-
- Length of pull from 10.5” to 15”
- Adjustable butt plate and rotational
- Total weight 9.5 oz
- Carbon Fiber, Aluminum, and Delrin Construction.
- Will also work on SIG MPX and MCX
- This is NOT a buffer tube
-
Sale!
- Black anodized aluminum
- Light weight
- Picatinney rail mount
- Compression fit on barrel
- Set same height as receiver rail
-
- Slick Side Upper
- Extreme ULW Hand Guard
- Choice of ULW, XLW, MID-B, or 10/16 barrel
- 2.5 pounds (with bolt)
- 9mm bolt sold separately
- Charge handle not included
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 16” Aluminum Shrouded barrel
- 5.25” effective 1:10 rifling
- Super feed barrel (no bolt modification required)
- Lightweight 13.5oz
- Replaces factory trunnion block
- Accepts AR15 hand guards
-
- 13.5” barrel
- 4140 steel
- 1/2-28 thread
- 1lb 1oz
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP
-
- 10” effective rifling
- 1:10” Twist rate
- 1/2-28 thread
- 13.5oz
- Works with any standard 9mm bolt
- Removable top ramp
- Hand polished bottom feed ramp
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 14oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and welded aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- 2 port mid-barrel brake
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 11.62” long
- 4oz
- 1/2-28 thread
- Unfinished aluminum
- End user to attach per ATF guide lines if wanting a legal 16” rifle barrel
-
Sale!
- 16" ULW barrel (5.25" effective rifling)
- Pin and weld aluminum shroud
- 15oz
- Black nitride bolt (extreme short stroke config)
- Bolt comes with short stroke pads
-
Sale!
- 4150CM steel
- Black Nitride Finish
- Weight: 1lb 4oz
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- Made out of Flake Carbon Fiber
- .1” wall thickness
- Aluminum barrel nut
- Small diameter for better grip
- 14.5″ length
- 6.5 oz total weight
- Works great with ULW barrels
- Blow back actions only!
-
Sale!
- 14.5” barrel w/ brake (16.25″ total)
- Steel brake – pinned/welded
- 1 lb 6oz
- 4150cm steel
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- ALLOW UPTO 5 DAYS FOR ASSEMBLEY
