- 16" ULW barrel (5.25" effective rifling)
- Pin and weld aluminum shroud
- 15oz
- Black nitride bolt (extreme short stroke config)
- Bolt comes with short stroke pads
-
Sale!
-
Sale!
- Made out of Flake Carbon Fiber
- .1” wall thickness
- Aluminum barrel nut
- Small diameter for better grip
- 14.5″ length
- 6.5 oz total weight
- Works great with ULW barrels
- Blow back actions only!
-
Sale!
- 8 position, extended buffer tube
- Compatible with the A5 Buffer System
- 5 ports to allow excess water and gas to escape the operating system
- Machined from 7075-T6 Aluminum with a durable hard coat anodized finish
-
Sale!
- 14.5” barrel w/ brake (16.25″ total)
- Steel brake – pinned/welded
- 1 lb 6oz
- 4150cm steel
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- ALLOW UPTO 5 DAYS FOR ASSEMBLEY
-
Sale!
- Steel blade, black oxide coated
- Comes with green and red fiber optic
- Mil spec A2 sight height
- .06" diameter fiber optic front sight
-
- Air cushioned on the recoil stroke for the last 1” of travel
- Wave spring enhances the 2nd stage to further reduce felt recoil and muzzle rise
- Designed to be used with the A5 length buffer tube
- Buffer weight – 5oz
- Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
- Factory sealed air cushion, no maintenance required
- Spring loaded 3rd stage cushion softens return stroke
- Aluminum construction air cushion
- Custom flat wire spring
- Short Stroke System, eliminates BHO capabilities in some cases
- Not for use with Colt mag fed lowers
- Also designed to work with the S&W Response.
-
- Black anodized 6061 Aluminum
- Mounts directly to barrel
- Uses factory screws to mount
- ¼” lower than factory rail
- Allows for use of detachable iron sights
- Leaves the factory rail clear for mounting a red dot sight
- Picatinny Rail Spec
- Front and rear rail are at the same height off the bore
-
Sale!
- Light weight 1.6 ounces
- Black anodized aluminum finish
- Easy installation
- Attaches with a 13/16” wrench
- Allows the use of any AR15 hand guard nut
-
- 16” legal length rifle barrel
- Pin and weld aluminum shroud
- Approximately 5.25” effective rifling
- Throated chamber to allow for longer over all length ammunition
- Shroud is hard coat anodized
- HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 14oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and welded aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- 2 port mid-barrel brake
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- 4150CM steel
- Black Nitride Finish
- Weight: 1lb 4oz
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- Comes with spring
- Adds 25 more rounds
- Designed for fast, easy cleaning
- Allows for bolt hold open
- Made of delrin
- Machined in house
-
Sale!
- Wide open sights, no clutter
- AR15 A2 Sight Height (rail height front/rear)
- .04” or .06” diameter fiber optic front sight
- Ghost ring rear or Buck Horn rear sight
- Super light each sight is less than 1 ounce
- Aluminum riser black anodized
- Adjustable for windage and elevation
-
Sale!
- 7% discounted bundle
- Package comes with
- Machined Delrin Magazine Funnel (will not fit pistol grip model)
- Extended Mag Release Button
- Charge Handle
- Delrin Butt Plate
- Black anodized aluminum 1/2-28 Long Muzzle Brake
- Machined funnel is made to work with both Glock & SR9 mags
-
- 13.5” barrel
- 4140 steel
- 1/2-28 thread
- 1lb 1oz
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP
-
- Comes with spring
- Adds 20 more rounds
- Designed for fast, easy cleaning
- Allows for bolt hold open
- Made of delrin
- Machined in house
-
Sale!
- 11oz
- 13.625" long
- Aluminum hand guard/nut
- Black anodized
- Picatinny top rail
- MLOK slots
-
Sale!
- Originally made for Mossberg 590 Shockwave and Remington TAC-14
- Can be used as generic handguard grip
- 80 Grit
- Grips made by 3M
-
- Black anodized 6061 Aluminum
- Mounts directly to barrel
- Picatinny Rail Spec
- Same Height as Rear Factory Rail
- Allows for use of detachable iron sights
- Uses factory screws to mount
- Designed to only work with rear factory rail
-
- 11.62” long
- 4oz
- 1/2-28 thread
- Unfinished aluminum
- End user to attach per ATF guide lines if wanting a legal 16” rifle barrel