- 12.2oz
- Comes with forearm
- Accepts standard AR15 hand grips
- Made out of strong delrin
- Accepts standard Ruger 10/22 receivers & similar
- AR hand grip not included
- Choose from Standard AR15 buffer tube extension or picatinny rail for butt stock attachment options
- Will not work with take down models
- SHIPPING 1/16/26
-
Sale!Out of stock
-
- 16.25" legal rifle barrel (4.5" rifling)
- 10.2oz
- Drop in for all .920” applications
- 7/8" Black Carbon Fiber Shroud (pinned and cover welded)
- 22LR Sport Chamber
- Will not work with takedown models
- SHIPPING 12/12/25
-
Sale!
- 16.25" legal rifle barrel (4.5" rifling)
- 10.2oz
- Drop in for all .920” applications
- 416SS steel barrel
- 3/4” diameter pinned and welded carbon fiber shroud
- 22LR Sport Chamber
- Will not work with takedown models
- SHIPPING 12/12/25
-
Sale!
- WORKS WITH YOUR ICE FISHING POLE
- Stainless Steel Hardware (included)
- Orange, Yellow, Red or Black Tubes
- FULL RANGE OF MOTION
- Folds up out of the way for travel, no need to remove.
- ALLOW FOR UP TO 1 WEEK FOR SHIPPING
-
Sale!Out of stock
- WORKS WITH YOUR ICE FISHING POLE
- stainless steel hardware (included)
- 3d printed parts and over built
- takes down for easy carry
- adjustable trigger tension
- ALLOW FOR UP TO 1 WEEK FOR SHIPPING
- YouTube short showing the function
- https://www.youtube.com/watch?v=rk-wDHU3hc8
-
Sale!Out of stock
- WORKS WITH THE FACTORY POLE
- stainless steel hardware (included)
- 3d printed parts and over built
- easy depth set adjustment
- folds for easy carry
- transducer mount not included
- ALLOW FOR UP TO 1 WEEK FOR SHIPPING
-
Sale!Out of stock
- 39" Black Carbon Fiber Tube
- stainless steel hardware
- 3d printed parts and over built
- easy depth set adjustment
- folds for easy carry
- transducer mount not included
- ALLOW FOR UP TO 1 WEEK FOR SHIPPING
-
Sale!Out of stock
- 8.0 oz
- 4.5” long
- ½-28 x .5” long thread
- 22LR Sport Chamber
- 416 Stainless Steel
- Will not work with takedown models
-
Sale!
- 16″ legal length rifle barrel (4.5″ rifling)
- 416 ss barrel
- 12oz
- Pin and welded, stainless steel shroud (.75" diameter)
- 22LR Sport Chamber
- Uses factory barrel collar, ejector, and roll pins from factory barrel
-
Sale!
- Mounts the 510C sight closer to bore
- Remove up to 4 ounces off the 510C
- Works on factory Ruger Receivers
- Comes with hardware to mount to receiver
- Black Anodized Aluminum
-
Sale!
- Allows you to use the Holosun 510C on your Browning Buck Mark
- 6061 material
- Black anodized
- Lowest possible mounting
- Just over 4oz with stripped optic
-
Sale!
- Allows you to use the Holosun 510C on your Ruger 22/45
- 6061 material
- Black anodized
- Lowest possible mounting
- Just over 4oz with stripped optic
-
Sale!Out of stock
- Super lightweight 6061 aluminum
- Black anodize protective finish
- Ambidextrous design
- Makes charging your pistol effortless and FAST
- Easy installation with brass set screw
-
Sale!
- 6061 material
- Silver finish
- Lowest possible mounting
- Just over 4oz with stripped optic
- Stainless hardware
- Includes a free ambidextrous side bolt racker with purchase!
-
Sale!Out of stock
- Black anodized aluminum
- Light weight
- Picatinney rail mount
- Compression fit on barrel
- Set same height as receiver rail
-
Sale!Out of stock
- Light weight aluminum
- Black anodize
- Front riser clamps on barrel
- Fits .750 and .920 diameter barrels
- Rear riser designed for factory Ruger receiver
- Dove tail slots to accept Ruger factory iron sights
- Rear riser allows for multiple positions
- Comes with hardware
- Sights not included
-
Sale!
- Installs in seconds without tools
- Eliminates wear on lower receiver
- Improves reliability of Drop-In kits and Dedicated Uppers
- Will NOT work with M&P 15-22
-
Sale!
- Made out of Delrin
- Quiet
- Light weight
- Cushions the impact of the TRACKER Bolt
-
Sale!Out of stock
- 16" legal rifle barrel (4.5" effective rifling)
- 1:16 rate of twist
- Pinned and welded aluminum shroud
- 3 port mid brake
- 11.5 ounces
- works with TRACKER or CMMG collar
-
Sale!Out of stock
- 416 SS, heat treated and hard chromed
- 5.7 ounces
- 10/22 extractor by Power Custom
- Compatible with CMMG firing pins
- Firing pin sold separately
-
Sale!Out of stock
- 8640 material
- Heat Treated
- Hard Chromed
- Comes with return spring
-
Sale!
- Recoil spring is retained, easy to work with and assemble
- Compatible with the TRACKER bolt & buffer only
- Similar in design to an AK47 recoil system
- Complete recoil assembly
-
Sale!
- Stainless steel construction
- Attaches to barrel with a set screw
- Works with the TRACKER barrel
- Can also be used with other 22rf barrels
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 10oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Remoable bottom feed ramp
- Blind Pinned and welded Carbon Fiber Shroud (BATF Compliant)
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
-
Sale!Out of stock
- 16” legal length rifle barrel (5.25” effective rifling)
- 14oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Removable bottom feed ramp
- Pin and welded aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- 2 port mid-barrel brake
- We assemble these barrels per order and typically shipped within one week.
-
Sale!
- TACCOM Super Feed Barrel (10 ounces)
- 1:10” Twist rate
- 13.5" Segmented Rail Aluminum Hand Guard (10 ounces)
- TACCOM Std. 9mm Bolt (13.5 ounces)
- Std Mil Spec Charge handle
- Lightened Enhanced Air Cushion Recoil System
- Complete Upper Weight w/bolt: 2lb - 15oz
- shipping 6/8/26
-
Sale!Out of stock
- 4150CM steel
- Black Nitride Finish
- Weight: 1lb 4oz
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- SHIPPING 01/24/25
-
Sale!
- Designed for carbine buffer tube length
- For use in blow back actions only
- Comes an AR15 flat wire spring
- 6.5 ounces
- 2 stage action
- Allows for the BHO/LRBHO to function
-
Sale!Out of stock
- 8 position, extended buffer tube (A5)
- 3/4" spacer w/wave spring
- Adds a 2nd stage to your recoil system....or enhances the 2nd stage you already have
- 5 ports to allow excess water and gas to escape the operating system
- Machined from 7075-T6 Aluminum with a durable hard coat anodized finish
- Works with MBX, KynSHOT, Mil Spec buffers and more
- will not work with JP-SCS or any 'cartdrige style recoil systems
-
Sale!Out of stock
- 8 position, extended buffer tube
- Compatible with the A5 Buffer System
- 5 ports to allow excess water and gas to escape the operating system
- Machined from 7075-T6 Aluminum with a durable hard coat anodized finish
-
Sale!
- Air cushioned on the recoil stroke for the last ¾” of travel
- Buffer weight - 5oz
- Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
- Reduces felt recoil and muzzle jump
- Factory sealed air cushion, no maintenance required
- Spring loaded cushion softens return stroke
- Aluminum construction air cushion
- Custom flat wire spring
- Short Stroke System, eliminates BHO capabilities.
-
Sale!
- Black Nitride finish
- Stainless Steel
- Works only with AR-9mm barrels
- 14.9 ounces
- Works with both Glock and Colt magazines
- "Dog-bone" style key for faster cleaning*
- SHIPPING DEC. 10, 2025
-
Sale!
- Black Nitride finish
- Pivoting Extractor
- Low drag, low weight key
- 13.5oz
- Works with both Glock magazines*
- Allows for the Bolt hold open to function with a shorter stroked rifle.
- Faster trigger reset
- Comes with longer spacers to help shorten your stroke
- COMPLETE READY TO DROP IN w/firing pin, extractor, key, etc.
- SHIPPING DEC. 10, 2025
-
Sale!Out of stock
- Made out of BLACK Carbon Fiber
- Aluminum barrel nut
- Small diameter for better grip
- 14.5" length
- 6oz total weight
- Works great with ULW barrels
- MLOK slots
- Blow back actions only!
-
- 3/4” aluminum cushion
- 25# wave spring, .62” travel
- Designed for the S&W Response using the TACCOM adjustable 9mm buffer
- Will also work with the TACCOM ESSB Bolt and the TACCOM adjustable 9mm buffer combination
- Includes (2) optional 3/8” spacers, aluminum cushion and wave spring
-
Sale!
- works with 9MM, 10MM and 40SW FPC
- Replaces the factory charge handle
- Allows for solid, hassle free charging
- 'Hook' and charge with authority using one finger
- Allows for charging weapon with shorter magazines inserted in factory buttstock
- Eliminates the fold/lock feature
- Will not break
- the 2 cocking handles can be placed in any of the 3 tapped holes
-
Sale!Out of stock
- works on the 9mm, 10mm and 40sw FPC
- Lightweight, not bulky, fits the Rifle nicely
- High strength DELRIN polymer
- Adjustable for Length of Pull
- Butt Plate can be angled to fit in the ‘pocket’ of your shoulder
- Butt Plate has an aggressive texture will stay put!
- Aluminum QD swivel mount installed
- Comes with Assembly Hardware
- Retains the factory recoil system
- SHIPPING 3/27/26
-
Sale!
- only works with the 9mm OR 10mm FPC
- Light weight 1.1 ounces
- Black anodized aluminum finish
- Attaches with a 7/8” wrench (9MM) OR set screws (10MM)
- Allows the use of any AR15 hand guard nut
- hand guard and/or hand guard nuts are NOT included
-
Sale!Out of stock
- 13oz
- 13 5/8" long
- Aluminum hand guard/ steel nut
- Black anodized
- Picatinny top rail
- MLOK slots
-
Sale!
- works on the 9mm, 10mm and 40sw FPC
- Lightweight 2.0 ounces
- Black anodized aluminum
- Allows for red dot sight to be mounted similar in position to the AR15 platform
- Same height off the barrel as the factory rail
- Allows for iron sights to be co-witnessed with scope
- Will not increase folded foot print.
- SHIPPING 4/3/2026
