-
- Modification cost: $50 per barrel
- 16" non-fluted Tippmann barrels only
- Removes over 1lb of weight**
- How to get started:
- Send your barrel to us with cash or check
- (please make checks payable to "Taccom")
- We modify your barrel (1-2 day window)
- We ship it back with tracking if email is provided
- Send your barrel to us with cash or check
- For USPS please send to: PO BOX 431, Dassel, MN, 55325
- For UPS/FedEx please send to: 131 Parker Ave W, Dassel, MN, 55325
-
- Replaces read SS screw so that you can adjust for shell length on the fly
- If ordering for 8up, you'll need to add x4 screws
- If ordering for 12up, you'll need to add x6 screws
- If ordering for 16up, you'll need to add x8 screws
-
- 17-4 stainless steel
- Made for reliable shell feeding
- Works with any tube extension
-
Sale!
- Installs in seconds without tools
- Eliminates wear on lower receiver
- Improves reliability of Drop-In kits and Dedicated Uppers
- Will NOT work with M&P 15-22
-
- Raises Shell holders by as much as 1.5" on the belt
- Works with all TACCOM shell holders
- Works with Tek-Lok, TMMS and ELS hooks
-
- Strap made out of nylon
- Attaches to your belt or belt loop for faster access
- Chamber flag made to universally fit all kinds of competition guns
-
Sale!
- Originally made for Mossberg 590 Shockwave and Remington TAC-14
- Can be used as generic handguard grip
- 80 Grit
- Grips made by 3M
-
- Made for 22 competition
- Spring engineered to our spec
- Works with CMMG, Model 1, and others
- Will NOT work with M&P 15-22
-
- Made for 22 competition
- Spring engineered to our spec, reduced power
- designed to be used with shorter barrels
- recommended to be used with our ULW barrel
-
Sale!
- WORKS WITH YOUR ICE FISHING POLE
- Stainless Steel Hardware (included)
- Orange, Yellow, Red or Black Tubes
- FULL RANGE OF MOTION
- Folds up out of the way for travel, no need to remove.
- ALLOW FOR UP TO 1 WEEK FOR SHIPPING
-
Sale!
- Made universally for Mossberg 590/590A1 and Remington 870; TAC-14
- 80 Grit
- Made by 3M
-
Sale!
- Nylon strap
- Strap keeps your hand from slipping off the forearm
- Comes with steel backers for screws
-
Out of stock
- All aluminum construction
- Black anodized
- Holds 2 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Modular in that you can attach to backer with 2 screws
- Easy set up
-
- HIGH VISIBILITY
- NO DRAG
- fully machined follower, made from acetal (Delrin)
- 12 gauge pumps, semi-auto shotguns
- 2 models: friction free or friction free Nova/Vinci
-
- Keeps your Chest Rig from slipping down during a stage
- Option to direct mount to backer plate
- Works with ALL Taccom Chest Rigs
- Also works with our competitor's chest rigs that use up to 2" wide nylon belts
-
For use with:
- TACCOM LW Carbine Recoil System
- Any Factory Carbine Recoil System
-
For use with:
- TACCOM LW Rifle Recoil System
- TACCOM ALW Rifle Recoil System
- Any Factory Rifle Recoil System
-
- Comes with Spring, T-Nuts and Screws
- AR15 Kit - works w/ Lancer and Magpul magazines
- DOES NOT COME WITH AN EXTENSION
- These kits complete the free downloaded extensions available on our download page
-
- works with the 9MM FPC only
- Replaces factory end plug
- Helps reduce felt recoil
- Delrin (polymer) construction
- Allows for BHO to function
- Easy installation
-
- 80 grit
- Made by 3M
- MLOK comes with 10 pieces (x8 4.7" | x2 solid)
-
Sale!
- Provides a positive hand stop
- MLOK design
- 3/4” diameter x 1” long
- Small foot print, compact
- Smooth and comfortable
-
Sale!
- Big enough to grab!
- Small enough not to snag!!
- easy installation
- Made from Delrin, will take the abuse.
-
- Full hard Stainless steel
- Precision laser cut
- Sharp edge for extracting unfired rounds
- Works with CMMG, Model 1, and others
- Will NOT work with M&P 15-22
-
Sale!Out of stock
- 3" diameter x 7 1/8" tall
- holds up to 250 rounds of 22rf ammo
- 3d printed
- engineered to be strong
- 'bullet' cap unscrews
-
Out of stock
- Works with the 8up Gemini shell holders
- Assemble 1, 2, 3 or more 8up on the web belt
- Have 8, 16, 24 or 32 rounds on your chest.
- Convenient shoulder strap keeps everything in place
-
- Enhances Feeding Reliability
- Stainless Steel
- Removable
- Minimal fitting required upper can be modified with a small file
-
- Completely replaces the factory bolt release
- Extended out and back
- Made out of 6061 aluminum
- Black anodized
- *Will NOT work with ARV*
-
- Cleans out lead and poly coated build up from rounds over time
- Made out of steel
- Attachable to a drill
- PCC option WILL NOT work with XLW barrel
-
- Black anodized 6061 Aluminum
- Mounts directly to barrel
- Picatinny Rail Spec
- Same Height as Rear Factory Rail
- Allows for use of detachable iron sights
- Uses factory screws to mount
- Designed to only work with rear factory rail
-
Sale!
- Steel blade, black oxide coated
- Comes with green and red fiber optic
- Mil spec A2 sight height
- .06" diameter fiber optic front sight
-
Sale!Out of stock
- 8640 material
- Heat Treated
- Hard Chromed
- Comes with return spring
-
- Drop in assembly
- Low reciprocating mass
- Steel BCG recommended
- Adjustable gas system required
- Both pieces - 1.1oz
- Reciprocating piece - 0.6oz
-
- Made out of TITANIUM
- No sharp internal corners
- Stress relieved
- Works with Taccom, Faxon, and Surmount bolts
-
Sale!Out of stock
- WORKS WITH YOUR ICE FISHING POLE
- stainless steel hardware (included)
- 3d printed parts and over built
- takes down for easy carry
- adjustable trigger tension
- ALLOW FOR UP TO 1 WEEK FOR SHIPPING
- YouTube short showing the function
- https://www.youtube.com/watch?v=rk-wDHU3hc8
-
- Drop in assembly
- Low reciprocating mass
- Steel BCG recommended
- Adjustable gas system required
- Both pieces - 2.2oz
- Reciprocating piece - 1.1oz
-
- Super fast magazine changes
- Simple installation
- Stainless steel post
- Large button
-
Out of stock
- Breacher variation has 3 hardened steel prongs that aid in stabilizing the muzzle for door breaching
- Breacher variation allows for a ‘gap’ between the end of the muzzle and close target
- All extensions add one shell to the capacity of the magazine tube in most cases
- Knurled body allows for easy on/off with no tools
-
Sale!
- Recoil spring is retained, easy to work with and assemble
- Compatible with the TRACKER bolt & buffer only
- Similar in design to an AK47 recoil system
- Complete recoil assembly
-
Sale!
- Made out of Delrin
- Quiet
- Light weight
- Cushions the impact of the TRACKER Bolt
