- Strap made out of nylon
- Attaches to your belt or belt loop for faster access
- Chamber flag made to universally fit all kinds of competition guns
Taccom’s new, inovative 22 products is aimed to give you the advantage over the competition.
-
-
Sale!
- Originally made for Mossberg 590 Shockwave and Remington TAC-14
- Can be used as generic handguard grip
- 80 Grit
- Grips made by 3M
-
- Both grips are 80 grit
- Made by 3M
- Key Mod comes with 10 pieces (x4 5.5" | x4 3.2" | x2 solid)
- MLOK comes with 10 pieces (x8 4.7" | x2 solid)
-
- 6 position carbine tube
- Commercial spec
- 6061-T6 Aluminum
- Black Hardcoat anodize
- Fits the VR80 & AR-9mm
- Comes with Castle Ring and AR15 latch plate
-
- Use your trigger finger to engage/disengage safety
- Great for left handed shooters
- Replaces push button safety
- Works on Ruger 10/22 and Ruger PC Carbine
- .312” diameter Stainless safety barrel, delrin levers
- Can be installed while receiver is still in your stock
- Works with factory trigger group
- Check out our installation video below
-
- 5 port or 9 port design
- Light weight
- Short brake .7 oz
- Long brake 1.1 oz
- Look under options for thread sizes
- Black anodized aluminum
- Long comp designed to make 14.5” barrel legal
- Please double check your barrel thread before ordering!
-
Sale!
- Black Anodized aluminum
- One and two port design
- Top exhaust exit
- Keeps your sights on target
- .88” end works perfect with Ruger 22/45 and Browning Buck Mark
- ½-28 thread
- O-ring used to clock brake
-
Sale!
- Steel blade, black oxide coated
- Comes with green and red fiber optic
- Mil spec A2 sight height
- .06" diameter fiber optic front sight
-
Sale!
- Wide open sights, no clutter
- AR15 A2 Sight Height (rail height front/rear)
- .04” or .06” diameter fiber optic front sight
- Ghost ring rear or Buck Horn rear sight
- Super light each sight is less than 1 ounce
- Aluminum riser black anodized
- Adjustable for windage and elevation
-
Sale!
- 11oz
- 13.625" long
- Aluminum hand guard/nut
- Black anodized
- Picatinny top rail
- MLOK slots
-
- Machined Aluminium
- Threading fits the standard AR15 platform
- Blowback AR style only! (PCC, 22)
-
Sale!
- Adapter for the most popular micro dots
- 6061 aluminum black anodized
- .155” thick
- Uses factory hardware
- Easy installation
- Pick the plate for your red dot
- Plate #1 - Trijicon, Holosun 407c, 507c
- Plate #2 - Vortex Venom, Viper, Burris Fastfire, EOtech MRDS
- Plate #3 - C-More, Vortex Razor, Romeo 3, Delta optical
-
Sale!
- Made out of Flake Carbon Fiber
- .1” wall thickness
- Aluminum barrel nut
- Small diameter for better grip
- 14.5″ length
- 6.5 oz total weight
- Works great with ULW barrels
- Blow back actions only!
-
Sale!
- Made out of Carbon Fiber
- Aluminum barrel nut
- Small diameter for better grip
- 14.5" length
- 6oz total weight
- Adjustable blast shield to be used with short barrels/long brakes
- Works great with ULW barrels
- MLOK slots
- Comes in Black, Green, Blue, Silver, & Red
- Blow back actions only!
-
- Under 6 ounces
- Lightest, most affordable carbon fiber handguard on the market
- Fire retardant
- Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
- Use's a standard Armorers wrench for installation to the upper receiver
-
- 11.62” long
- 4oz
- 1/2-28 thread
- Unfinished aluminum
- End user to attach per ATF guide lines if wanting a legal 16” rifle barrel
-
- Cleans out lead and poly coated build up from rounds over time
- Made out of steel
- Attachable to a drill
- PCC option WILL NOT work with XLW barrel
-
- 17-4 SS
- Heat Treated to Rc 42
- No Sharp internal corners
- Works with CMMG, Model 1, TACCOM and others
- Will NOT work with M&P 15-22
-
- Full hard Stainless steel
- Precision laser cut
- Sharp edge for extracting unfired rounds
- Works with CMMG, Model 1, and others
- Will NOT work with M&P 15-22
-
Sale!
- Installs in seconds without tools
- Eliminates wear on lower receiver
- Improves reliability of Drop-In kits and Dedicated Uppers
- Will NOT work with M&P 15-22
-
- Made for 22 competition
- Spring engineered to our spec, reduced power
- designed to be used with shorter barrels
- recommended to be used with our ULW barrel
-
- Made for 22 competition
- Spring engineered to our spec
- Works with CMMG, Model 1, and others
- Will NOT work with M&P 15-22
-
- Kit comes with:
- Pressure plug
- Firing pin & spring
- Extractor & spring
- Recoil spring
- Will NOT work with M&P 15-22
- Kit comes with:
-
- Light weight Aluminum charge handle
- .25” longer than factory
- KIDD Innovative Stainless Steel Guide Rod
- KIDD Innovative Recoil spring pack
-
Sale!
- Light weight aluminum
- Black anodize
- Front riser clamps on barrel
- Fits .750 and .920 diameter barrels
- Rear riser designed for factory Ruger receiver
- Dove tail slots to accept Ruger factory iron sights
- Rear riser allows for multiple positions
- Comes with hardware
- Sights not included
-
Sale!
- Black anodized aluminum
- Light weight
- Picatinney rail mount
- Compression fit on barrel
- Set same height as receiver rail
-
Sale!
- 6061 material
- Silver finish
- Lowest possible mounting
- Just over 4oz with stripped optic
- Stainless hardware
- Includes a free ambidextrous side bolt racker with purchase!
-
Sale!
- Super lightweight 6061 aluminum
- Black anodize protective finish
- Ambidextrous design
- Makes charging your pistol effortless and FAST
- Easy installation with brass set screw
-
Sale!
- Allows you to use the Holosun 510C on your Ruger 22/45
- 6061 material
- Black anodized
- Lowest possible mounting
- Just over 4oz with stripped optic
-
Sale!
- Allows you to use the Holosun 510C on your Browning Buck Mark
- 6061 material
- Black anodized
- Lowest possible mounting
- Just over 4oz with stripped optic
-
Sale!
- Mounts the 510C sight closer to bore
- Remove up to 4 ounces off the 510C
- Works on factory Ruger Receivers
- Comes with hardware to mount to receiver
- Black Anodized Aluminum
-
Sale!
- 5” fluted .22RF barrel
- 1/2-28 threaded end (brake not included)
- 4150CM material
- Muzzle flip control lever (right handed shooters)
- 7.5oz
- Include a free ambidextrous bolt racker with purchase
-
- 4.5" length
- 7.5oz
- Barrel collar NOT included
- Chambered for 22 long rifle (22LR)
- 1:16 twist rate
- Designed to be used with CMMG barrel collar (.460 dia spud)
- 1/2-28 threaded barrel
- Will NOT work with M&P 15-22
-
- 16” length, 4.5" effective rifling
- 11oz
- Barrel collar NOT included
- Chambered for 22 long rifle (22LR)
- 1:16 twist rate
- Pin and weld, (.75" dia) brushed aluminum shroud
- Designed to be used with CMMG barrel collar (.460 dia spud)
- Will NOT work with M&P 15-22
-
- 11” or 16” fully rifled barrel
- 1:16” twist
- Chambered for 22 long rifle
- Threaded ½-28 (3/4” barrel end contour)
- Will work with CMMG barrel collar (.46 dia spud)
- Designed to work with TACCOM 22rf bolt assy
- Will NOT work with M&P 15-22
- BARREL COLLAR NOT INCLUDED
-
- Chambered for 22 long rifle (22LR)
- 16” ULW barrel (4.5” effective rifling)
- 1:16 twist rate
- TACCOM Bolt assembly
- Works great with Black Dog magazines (not included)
- **Threaded ½-28 (3/4” barrel end contour)
- Will NOT work with M&P 15-22
-
Sale!
- 1-16 twist match barrel
- ½ -28 Thread Protector
- Aluminum slim MLOK handguard
- Aluminum upper
- Stainless Steel Bolt
-
Sale!
- Taccom ULW barrel
- 2lb 10oz
- Aluminum slim MLOK handguard
- Aluminum upper
- Stainless Steel Bolt
- Please allow up to 5 days processing if backordered
-
- ULW upper - 2lbs, 40z complete
- Chambered for 22 long rifle (22LR)
- 16” ULW barrel (4.5” effective rifling)
- 1:16 twist rate
- TACCOM bolt assembly
- Mil spec charge handle
- ULW carbon fiber hand guard
- Works great with Black Dog magazines (not included)
- Ready to drop on to your AR15 223/5.56 lower
- MADE PER ORDER....ALLOW ONE WEEK FOR SHIPPING
-
Sale!
- 16″ legal length rifle barrel (4.5″ rifling)
- 10oz
- Pin and weld, brushed aluminum shroud (.75" diameter)
- 22LR Sport Chamber
- Uses factory barrel collar, ejector, and roll pins from factory barrel