-
- Enhances Feeding Reliability
- Stainless Steel
- Removable
- Minimal fitting required upper can be modified with a small file
-
- Designed for carbine buffer tube length
- For use in blow back actions only
- Comes with either Enhanced Carbine Spring or flat wire spring*
- 6.2 ounces
- 3 stage action
- Allows for the BHO to function
- If you need a spacer for a rifle length buffer tube, let us know in the comment section at checkout!
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
Sale!
- Black Nitride finish
- Stainless Steel
- Works only with AR-9mm barrels
- 14.9 ounces
- Works with both Glock and Colt magazines
- "Dog-bone" style key for faster cleaning*
- SHIPPING DEC. 10, 2025
-
Sale!
- Black Nitride finish
- Pivoting Extractor
- Low drag, low weight key
- 13.5oz
- Works with both Glock magazines*
- Allows for the Bolt hold open to function with a shorter stroked rifle.
- Faster trigger reset
- Comes with longer spacers to help shorten your stroke
- COMPLETE READY TO DROP IN w/firing pin, extractor, key, etc.
- SHIPPING DEC. 10, 2025
-
- Drop in assembly
- Low reciprocating mass
- Steel BCG recommended
- Adjustable gas system required
- Both pieces - 1.1oz
- Reciprocating piece - 0.6oz
-
Sale!
- works on the 9mm, 10mm and 40sw FPC
- Lightweight 2.0 ounces
- Black anodized aluminum
- Allows for red dot sight to be mounted similar in position to the AR15 platform
- Same height off the barrel as the factory rail
- Allows for iron sights to be co-witnessed with scope
- Will not increase folded foot print.
- SHIPPING 4/3/2026
-
- works with the 9MM FPC only
- Replaces factory end plug
- Helps reduce felt recoil
- Delrin (polymer) construction
- Allows for BHO to function
- Easy installation
-
Out of stock
- Made out of TITANIUM
- No sharp internal corners
- Stress relieved
- Works with Taccom, Faxon, and Surmount bolts
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 10oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and welded Black Carbon Fiber Shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
-
Sale!
- 4140 steel
- Black Nitride Finish
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- Use your trigger finger to engage/disengage safety
- Great for left handed shooters
- Replaces push button safety
- Works on Ruger 10/22 and Ruger PC Carbine
- .312” diameter Stainless safety barrel, delrin levers
- Can be installed while receiver is still in your stock
- Works with factory trigger group
- Check out our installation video below
-
Sale!
- Installs in seconds without tools
- Eliminates wear on lower receiver
- Improves reliability of Drop-In kits and Dedicated Uppers
- Will NOT work with M&P 15-22
-
Out of stock
- 5 port or 9 port design
- Light weight
- Short brake .7 oz
- Long brake 1.1 oz
- Look under options for thread sizes
- Black anodized aluminum
- Long comp designed to make 14.5” barrel legal
- Please double check your barrel thread before ordering!
-
For use with:
- TACCOM LW Carbine Recoil System
- Any Factory Carbine Recoil System
-
- All variations come with a spring*
- Machined Aluminium and anodized black
- Threaded differently on both sides for a modular set up
- "Kits" variations come with tube of choice, spring, and end cap
- These tubes ONLY work with Taccom Extreme Extension nuts
- Nuts sold separately
-
Out of stock
- Under 6 ounces
- Lightest, most affordable carbon fiber handguard on the market
- Fire retardant
- Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
- Use's a standard Armorers wrench for installation to the upper receiver
-
Sale!Out of stock
- Made out of BLACK Carbon Fiber
- Aluminum barrel nut
- Small diameter for better grip
- 14.5" length
- 6oz total weight
- Works great with ULW barrels
- MLOK slots
- Blow back actions only!
-
- Holds 8 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
- Super fast magazine changes
- Simple installation
- Stainless steel post
- Large button
