-
- Modification cost: $50 per barrel
- 16" non-fluted Tippmann barrels only
- Removes over 1lb of weight**
- How to get started:
- Send your barrel to us with cash or check
- (please make checks payable to "Taccom")
- We modify your barrel (1-2 day window)
- We ship it back with tracking if email is provided
- Send your barrel to us with cash or check
- For USPS please send to: PO BOX 431, Dassel, MN, 55325
- For UPS/FedEx please send to: 131 Parker Ave W, Dassel, MN, 55325
-
Sale!
- 1-16 twist match barrel
- ½ -28 Thread Protector
- Aluminum slim MLOK handguard
- Aluminum upper
- Stainless Steel Bolt
-
Sale!
- 16" ULW barrel (5.25" effective rifling)
- Pin and weld aluminum shroud
- 15oz
- Black nitride bolt (extreme short stroke config)
- Bolt comes with short stroke pads
-
Sale!
- Made out of Flake Carbon Fiber
- .1” wall thickness
- Aluminum barrel nut
- Small diameter for better grip
- 14.5″ length
- 6.5 oz total weight
- Works great with ULW barrels
- Blow back actions only!
-
- For .750" diameter barrels
- Steel construction
- Super effective
- Wrench flats provide tight fit
- Angle forward design
- Black Nitride Finish
- 3 oz
- 1/2 28 thread
-
Sale!
- Taccom ULW barrel
- 2lb 10oz
- Aluminum slim MLOK handguard
- Aluminum upper
- Stainless Steel Bolt
- Please allow up to 5 days processing if backordered
-
Sale!
- 8 position, extended buffer tube
- Compatible with the A5 Buffer System
- 5 ports to allow excess water and gas to escape the operating system
- Machined from 7075-T6 Aluminum with a durable hard coat anodized finish
-
- Light weight Aluminum charge handle
- .25” longer than factory
- KIDD Innovative Stainless Steel Guide Rod
- KIDD Innovative Recoil spring pack
-
- Stand out in the competition with Patriot Skinz Taccom edition pmag stickers
- Made for M3 .223 PMAG
- 30 round or 40 round option
-
Sale!
- 6061 material
- Silver finish
- Lowest possible mounting
- Just over 4oz with stripped optic
- Stainless hardware
- Includes a free ambidextrous side bolt racker with purchase!
-
Sale!
- 5” fluted .22RF barrel
- 1/2-28 threaded end (brake not included)
- 4150CM material
- Muzzle flip control lever (right handed shooters)
- 7.5oz
- Include a free ambidextrous bolt racker with purchase
-
Sale!
- Allows you to use the Holosun 510C on your Browning Buck Mark
- 6061 material
- Black anodized
- Lowest possible mounting
- Just over 4oz with stripped optic
-
Sale!
- 14.5” barrel w/ brake (16.25″ total)
- Steel brake – pinned/welded
- 1 lb 6oz
- 4150cm steel
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- ALLOW UPTO 5 DAYS FOR ASSEMBLEY
-
Sale!
- 8.0 oz
- 4.5” long
- ½-28 x .5” long thread
- 22LR Sport Chamber
- 416 Stainless Steel
- Will not work with takedown models
-
Sale!
- Steel blade, black oxide coated
- Comes with green and red fiber optic
- Mil spec A2 sight height
- .06" diameter fiber optic front sight
-
- Air cushioned on the recoil stroke for the last 1” of travel
- Wave spring enhances the 2nd stage to further reduce felt recoil and muzzle rise
- Designed to be used with the A5 length buffer tube
- Buffer weight – 5oz
- Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
- Factory sealed air cushion, no maintenance required
- Spring loaded 3rd stage cushion softens return stroke
- Aluminum construction air cushion
- Custom flat wire spring
- Short Stroke System, eliminates BHO capabilities in some cases
- Not for use with Colt mag fed lowers
- Also designed to work with the S&W Response.
-
- Black anodized 6061 Aluminum
- Mounts directly to barrel
- Uses factory screws to mount
- ¼” lower than factory rail
- Allows for use of detachable iron sights
- Leaves the factory rail clear for mounting a red dot sight
- Picatinny Rail Spec
- Front and rear rail are at the same height off the bore
-
- ULW upper - 2lbs, 40z complete
- Chambered for 22 long rifle (22LR)
- 16” ULW barrel (4.5” effective rifling)
- 1:16 twist rate
- TACCOM bolt assembly
- Mil spec charge handle
- ULW carbon fiber hand guard
- Works great with Black Dog magazines (not included)
- Ready to drop on to your AR15 223/5.56 lower
- MADE PER ORDER....ALLOW ONE WEEK FOR SHIPPING
-
- Black anodized aluminum
- Adds 8.25” to factory pistol barrel
- Overlaps factory barrel by .625” for a strong connection
- Extension weighs 2oz
- Makes the 1522P barrel a legal 16” rifle barrel
- Must be attached permanently per ATF guide lines
- **Can purchase the extension or send in your 1522P for modification (scroll down to learn more)
-
Sale!
- Allows you to use the Holosun 510C on your Ruger 22/45
- 6061 material
- Black anodized
- Lowest possible mounting
- Just over 4oz with stripped optic
-
Sale!
- Light weight 1.6 ounces
- Black anodized aluminum finish
- Easy installation
- Attaches with a 13/16” wrench
- Allows the use of any AR15 hand guard nut
-
- 16” legal length rifle barrel
- Pin and weld aluminum shroud
- Approximately 5.25” effective rifling
- Throated chamber to allow for longer over all length ammunition
- Shroud is hard coat anodized
- HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
-
- Chambered for 22 long rifle (22LR)
- 16” ULW barrel (4.5” effective rifling)
- 1:16 twist rate
- TACCOM Bolt assembly
- Works great with Black Dog magazines (not included)
- **Threaded ½-28 (3/4” barrel end contour)
- Will NOT work with M&P 15-22
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 14oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and welded aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- 2 port mid-barrel brake
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- 4150CM steel
- Black Nitride Finish
- Weight: 1lb 4oz
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- Black Anodized aluminum
- One and two port design
- Top exhaust exit
- Keeps your sights on target
- .88” end works perfect with Ruger 22/45 and Browning Buck Mark
- ½-28 thread
- O-ring used to clock brake
-
- Comes with spring
- Adds 25 more rounds
- Designed for fast, easy cleaning
- Allows for bolt hold open
- Made of delrin
- Machined in house
-
- 11” or 16” fully rifled barrel
- 1:16” twist
- Chambered for 22 long rifle
- Threaded ½-28 (3/4” barrel end contour)
- Will work with CMMG barrel collar (.46 dia spud)
- Designed to work with TACCOM 22rf bolt assy
- Will NOT work with M&P 15-22
- BARREL COLLAR NOT INCLUDED
-
Sale!
- Wide open sights, no clutter
- AR15 A2 Sight Height (rail height front/rear)
- .04” or .06” diameter fiber optic front sight
- Ghost ring rear or Buck Horn rear sight
- Super light each sight is less than 1 ounce
- Aluminum riser black anodized
- Adjustable for windage and elevation
-
Sale!
- 7% discounted bundle
- Package comes with
- Machined Delrin Magazine Funnel (will not fit pistol grip model)
- Extended Mag Release Button
- Charge Handle
- Delrin Butt Plate
- Black anodized aluminum 1/2-28 Long Muzzle Brake
- Machined funnel is made to work with both Glock & SR9 mags
-
- Works with TEKLOK (sold separately), TMMS and ELS.
- Articulates at the hip joint, no loss of motion.
- Comes with quick detach leg strap. 2 point attachment, belt and thigh. Remove the rig in seconds.
- 3/4" mount spacing allows you to mount TACCOM, Carbon Arms' and Invictus Practical shell holders.
-
- 13.5” barrel
- 4140 steel
- 1/2-28 thread
- 1lb 1oz
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP
-
- Choose compact or spaced quad
- Can be used for dual or quad loading
- Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
- Aluminum construction
- Black anodized
- Holds 16 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Easy set up
- Some assembly required
-
- Works with the 8up Gemini shell holders
- Assemble 1, 2, 3 or more 8up on the web belt
- Have 8, 16, 24 or 32 rounds on your chest.
- Convenient shoulder strap keeps everything in place
-
- Total weight 6oz-8oz
- 4 color options
- Made from extremely tough Lexon (.100” wall thickness)
- See your shells with ease
- Modular system (will work with all TACCOM extension tubes for adding even more rounds)
- Spring & Stabilizer included
- Nuts purchased separately
-
- Chrome Silicon Spring
- Carbine length
- Approximately 4 more LBS preload over the milspec carbine spring
- Will also work for PCC as well
-
- 4.5" length
- 7.5oz
- Barrel collar NOT included
- Chambered for 22 long rifle (22LR)
- 1:16 twist rate
- Designed to be used with CMMG barrel collar (.460 dia spud)
- 1/2-28 threaded barrel
- Will NOT work with M&P 15-22
-
- Comes with spring
- Adds 20 more rounds
- Designed for fast, easy cleaning
- Allows for bolt hold open
- Made of delrin
- Machined in house
-
- Machined Aluminium
- Anodized black
- Made ONLY for Taccom Extreme Extension tubes and/or nuts
-
- All aluminum construction
- Black anodized
- Holds 2 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Modular in that you can attach to backer with 2 screws
- Easy set up
-
- All variations come with a spring
- Machined Aluminium and anodized black
- Comes with tube of choice, spring, and end cap
- These tubes ONLY work with Taccom Extreme Extension nuts
- Nuts sold separately
-
Sale!
- 11oz
- 13.625" long
- Aluminum hand guard/nut
- Black anodized
- Picatinny top rail
- MLOK slots
-
- Chrome Silicon Spring
- Improves Cycling and Overall Operation
- Traditional Round wire spring
- Fits factory VR80 buffer tube
- Recommended for use with the TACCOM VR80 Recoil buffer
-
Sale!
- Super lightweight 6061 aluminum
- Black anodize protective finish
- Ambidextrous design
- Makes charging your pistol effortless and FAST
- Easy installation with brass set screw
-
Sale!
- Originally made for Mossberg 590 Shockwave and Remington TAC-14
- Can be used as generic handguard grip
- 80 Grit
- Grips made by 3M
-
Sale!
- Light weight aluminum
- Black anodize
- Front riser clamps on barrel
- Fits .750 and .920 diameter barrels
- Rear riser designed for factory Ruger receiver
- Dove tail slots to accept Ruger factory iron sights
- Rear riser allows for multiple positions
- Comes with hardware
- Sights not included
-
- Black anodized 6061 Aluminum
- Mounts directly to barrel
- Picatinny Rail Spec
- Same Height as Rear Factory Rail
- Allows for use of detachable iron sights
- Uses factory screws to mount
- Designed to only work with rear factory rail
-
- 7% discounted bundle
- Package includes:
- VR80 recoil buffer
- VR80 Flat wire spring
- VR80 buffer tube
- Comes in Black
-
- 11.62” long
- 4oz
- 1/2-28 thread
- Unfinished aluminum
- End user to attach per ATF guide lines if wanting a legal 16” rifle barrel
-
- Drop in assembly
- Low reciprocating mass
- Adjustable recoil spring preload with included spacers
- Steel BCG recommended
- Adjustable gas system required
- Spring NOT INCLUDED
- Both pieces (including spacers) - 2.5oz
- Reciprocating piece - 1oz
-
- Designed for carbine buffer tubes
- Light weight
- 3 stage action
- Negates the need for gas tuning
- 1.5 ounce total weight
- Does not come with recoil spring
-
- Funnel makes magazine insertion easy and fast
- Extended bolt release easier to ‘find’
- Funnel is made from high density Delrin
- Extended bolt made out of 6061 Aluminum & Black Anodized
- *Will NOT work with ARV*
- Kit includes:
- Funnel
- Bolt release
-
- 16” Aluminum Shrouded barrel
- 5.25” effective 1:10 rifling
- Super feed barrel (no bolt modification required)
- Lightweight 13.5oz
- Replaces factory trunnion block
- Accepts AR15 hand guards
-
- Comes with Spring, T-Nuts and Screws
- AR15 Kit - works w/ Lancer and Magpul magazines
- DOES NOT COME WITH AN EXTENSION
- These kits complete the free downloaded extensions available on our download page
-
- 10” effective rifling
- 1:10” Twist rate
- 1/2-28 thread
- 13.5oz
- Works with any standard 9mm bolt
- Removable top ramp
- Hand polished bottom feed ramp
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP
-
- Choose compact or spaced quad
- Can be used for dual or quad loading
- Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
- Aluminum construction
- Black anodized
- Holds 12 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Easy set up
- Some assembly required
-
- Full hard Stainless steel
- Precision laser cut
- Sharp edge for extracting unfired rounds
- Works with CMMG, Model 1, and others
- Will NOT work with M&P 15-22
-
Sale!
- Decrease mag reload times
- Mag release made out of 6061, black anodized aluminum
- High density Delrin magazine funnel
- High density Delrin Bolt Release Extension
- *Will NOT work with AKV*
- Bundle includes:
- ARV Funnel
- ARV Bolt Release Extension
- ARV Mag Release
-
Sale!
- Mounts the 510C sight closer to bore
- Remove up to 4 ounces off the 510C
- Works on factory Ruger Receivers
- Comes with hardware to mount to receiver
- Black Anodized Aluminum
-
- Direct replacement
- Allows the use of your trigger finger for magazine release
- Retains ‘traditional’ magazine release as well.
- Ambidextrous design
- Black anodized aluminum
