- Made out of TITANIUM
- No sharp internal corners
- Stress relieved
- Works with Taccom, Faxon, and Surmount bolts
-
-
Sale!
- Black Nitride finish
- Pivoting Extractor
- Low drag, low weight key
- 13.5oz
- Works with both Glock and Colt magazines*
- Allows for the Bolt hold open to function with a shorter stroked rifle.
- Faster trigger reset
- Comes with longer spacers to help shorten your stroke
- COMPLETE READY TO DROP IN w/firing pin, extractor, key, etc.
-
Sale!
- Black Nitride finish
- Stainless Steel
- Works only with AR-9mm barrels
- 14.9 ounces
- Works with both Glock and Colt magazines
- "Dog-bone" style key for faster cleaning*
-
Sale!
- Air cushioned on the recoil stroke for the last ¾” of travel
- Buffer weight - 5oz
- Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
- Reduces felt recoil and muzzle jump
- Factory sealed air cushion, no maintenance required
- Spring loaded cushion softens return stroke
- Aluminum construction air cushion
- Custom flat wire spring
- Short Stroke System, eliminates BHO capabilities.
-
- Air cushioned on the recoil stroke for the last 1” of travel
- Wave spring enhances the 2nd stage to further reduce felt recoil and muzzle rise
- Designed to be used with the A5 length buffer tube
- Buffer weight – 5oz
- Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
- Factory sealed air cushion, no maintenance required
- Spring loaded 3rd stage cushion softens return stroke
- Aluminum construction air cushion
- Custom flat wire spring
- Short Stroke System, eliminates BHO capabilities in some cases
- Not for use with Colt mag fed lowers
- Also designed to work with the S&W Response.
-
Sale!
- 8 position, extended buffer tube
- Compatible with the A5 Buffer System
- 5 ports to allow excess water and gas to escape the operating system
- Machined from 7075-T6 Aluminum with a durable hard coat anodized finish
-
- Designed for carbine buffer tube length
- For use in blow back actions only
- Comes with either Enhanced Carbine Spring or flat wire spring*
- 6.2 ounces
- 3 stage action
- Allows for the BHO to function
- If you need a spacer for a rifle length buffer tube, let us know in the comment section at checkout!
-
Sale!
- 14.5” barrel w/ brake (16.25″ total)
- Steel brake – pinned/welded
- 1 lb 6oz
- 4150cm steel
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- ALLOW UPTO 5 DAYS FOR ASSEMBLEY
-
- 13.5” barrel w/ brake (16.25″ total)
- Steel brake – pinned/welded
- 1 lb 8oz
- 4140 steel
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 10” effective rifling (16" total length)
- 1:10” Twist rate
- Pinned and welded
- 1lb 3oz
- Works with any standard 9mm bolt
- Removable top ramp
- Hand polished bottom feed ramp
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- 4150CM steel
- Black Nitride Finish
- Weight: 1lb 4oz
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 13.5” barrel
- 4140 steel
- 1/2-28 thread
- 1lb 1oz
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP
-
- 10” effective rifling
- 1:10” Twist rate
- 1/2-28 thread
- 13.5oz
- Works with any standard 9mm bolt
- Removable top ramp
- Hand polished bottom feed ramp
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 14oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and welded aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- 2 port mid-barrel brake
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 11.62” long
- 4oz
- 1/2-28 thread
- Unfinished aluminum
- End user to attach per ATF guide lines if wanting a legal 16” rifle barrel
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 15oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and weld, hard coat anodized aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 11oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and weld, brushed aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 4140 steel
- Black Nitride Finish
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- Slick Side Upper
- Extreme ULW Hand Guard
- Choice of ULW, XLW, MID-B, or 10/16 barrel
- 2.5 pounds (with bolt)
- 9mm bolt sold separately
- Charge handle not included
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 16” legal length rifle barrel
- Pin and weld aluminum shroud
- Approximately 5.25” effective rifling
- Throated chamber to allow for longer over all length ammunition
- Shroud is hard coat anodized
- HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
-
Sale!
- 16" ULW barrel (5.25" effective rifling)
- Pin and weld aluminum shroud
- 15oz
- Black nitride bolt (extreme short stroke config)
- Bolt comes with short stroke pads
-
- Cleans out lead and poly coated build up from rounds over time
- Made out of steel
- Attachable to a drill
- PCC option WILL NOT work with XLW barrel
-
- Comes with spring
- Adds 25 more rounds
- Designed for fast, easy cleaning
- Allows for bolt hold open
- Made of delrin
- Machined in house
-
- Completely replaces the factory bolt release
- Extended out and back
- Made out of 6061 aluminum
- Black anodized
- *Will NOT work with ARV*
-
- Direct replacement
- Allows the use of your trigger finger for magazine release
- Retains ‘traditional’ magazine release as well.
- Ambidextrous design
- Black anodized aluminum
-
- Replaces factory recoil block
- Installs in minutes
- Helps reduce felt recoil
- Helps reduce muzzle rise
- Uses a 24# wave spring
- Engineered for long use
- *Will NOT work with ARV*
-
- Funnel makes magazine insertion easy and fast
- Extended bolt release easier to ‘find’
- Funnel is made from high density Delrin
- Extended bolt made out of 6061 Aluminum & Black Anodized
- *Will NOT work with ARV*
- Kit includes:
- Funnel
- Bolt release
-
Sale!
- Helps reduce felt recoil
- Decrease mag reload times
- Bolt release, mag release, & recoil block made out of 6061, black anodized aluminum
- High density delrin funnel
- *Will NOT work with ARV*
- Bundle includes:
- AKV Funnel
- AKV Bolt Release
- AKV Mag Release
- AKV Recoil Cushion
-
Sale!
- Decrease mag reload times
- Mag release made out of 6061, black anodized aluminum
- High density Delrin magazine funnel
- High density Delrin Bolt Release Extension
- *Will NOT work with AKV*
- Bundle includes:
- ARV Funnel
- ARV Bolt Release Extension
- ARV Mag Release
-
Sale!
- Black anodized aluminum
- Light weight
- Picatinney rail mount
- Compression fit on barrel
- Set same height as receiver rail
-
- 16” Aluminum Shrouded barrel
- 5.25” effective 1:10 rifling
- Super feed barrel (no bolt modification required)
- Lightweight 13.5oz
- Replaces factory trunnion block
- Accepts AR15 hand guards
-
- Length of pull from 10.5" to 15”
- Butt Plate adjusts up/down and rotational
- Adjustable cheek riser
- Aluminum/Delrin construction
- Ambidextrous design allows for right or left handed shooters
- "M&P" variation slips over the 15-22 ‘faux’ tube
- "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
-
- Length of pull from 10.5” to 15”
- Adjustable butt plate and rotational
- Total weight 9.5 oz
- Carbon Fiber, Aluminum, and Delrin Construction.
- Will also work on SIG MPX and MCX
- This is NOT a buffer tube
