- 16” legal length rifle barrel (5.25” effective rifling)
- 10oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Remoable bottom feed ramp
- Blind Pinned and welded Carbon Fiber Shroud (BATF Compliant)
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
-
Sale!
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 10oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and welded Black Carbon Fiber Shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
-
Sale!Out of stock
- 16” legal length rifle barrel (5.25” effective rifling)
- 14oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Removable bottom feed ramp
- Pin and welded aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- 2 port mid-barrel brake
- We assemble these barrels per order and typically shipped within one week.
-
Sale!
- 10” effective rifling
- 1:10” Twist rate
- 1/2-28 thread
- 13.5oz
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
-
Sale!
- 8.5” effective rifling
- 1:10” Twist rate
- 1/2-28 thread
- 12.3oz
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
-
Sale!
- TACCOM Super Feed Barrel (10 ounces)
- 1:10” Twist rate
- 13.5" Segmented Rail Aluminum Hand Guard (10 ounces)
- TACCOM Std. 9mm Bolt (13.5 ounces)
- Std Mil Spec Charge handle
- Lightened Enhanced Air Cushion Recoil System
- Complete Upper Weight w/bolt: 2lb - 15oz
- shipping 6/8/26
-
Out of stock
- 13.5” barrel
- 4150cr steel
- 1/2-28 thread
- 1lb 1oz
- Removable top ramp
- Removable bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- SHIPPING 01/24/25
-
Sale!Out of stock
- 4150CM steel
- Black Nitride Finish
- Weight: 1lb 4oz
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- SHIPPING 01/24/25
-
Sale!
- 10” effective rifling (16" total length)
- 1:10” Twist rate
- Pinned and welded
- stainless steel coupler (brake to barrel)
- 1lb 1.0oz (17 ounces)
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
- 2 port brake design
- Unique Carbon fiber brake is pinned and cover welded to make a legal 16" rifle barrel
- We assemble these barrels per order and typically shipped within one week.
-
Sale!
- 8” effective rifling (16" total length)
- 1:10” Twist rate
- Pinned and welded
- stainless steel coupler (brake to barrel)
- 1lb 0oz (16 ounces)
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
- 2 port brake design
- Unique Carbon fiber brake is pinned and cover welded to make a legal 16" rifle barrel
- We assemble these barrels per order and typically shipped within one week.
-
Out of stock
- 13.5” barrel w/ brake (16.25″ total)
- Steel brake – pinned/welded
- 1 lb 4oz
- 4150CR steel
- Removable ramps
- Hand polished chamber entry
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- We assemble these barrels per order and typically shipped within one week.
-
Sale!
- Designed for carbine buffer tube length
- For use in blow back actions only
- Comes an AR15 flat wire spring
- 6.5 ounces
- 2 stage action
- Allows for the BHO/LRBHO to function
-
- Designed for carbine buffer tube length
- For use in blow back actions only
- Comes with either Enhanced Carbine Spring or flat wire spring*
- 6.2 ounces
- 3 stage action
- Allows for the BHO to function
- If you need a spacer for a rifle length buffer tube, let us know in the comment section at checkout!
-
Sale!Out of stock
- 8 position, extended buffer tube (A5)
- 3/4" spacer w/wave spring
- Adds a 2nd stage to your recoil system....or enhances the 2nd stage you already have
- 5 ports to allow excess water and gas to escape the operating system
- Machined from 7075-T6 Aluminum with a durable hard coat anodized finish
- Works with MBX, KynSHOT, Mil Spec buffers and more
- will not work with JP-SCS or any 'cartdrige style recoil systems
-
Sale!Out of stock
- 8 position, extended buffer tube
- Compatible with the A5 Buffer System
- 5 ports to allow excess water and gas to escape the operating system
- Machined from 7075-T6 Aluminum with a durable hard coat anodized finish
-
- Air cushioned on the recoil stroke for the last 1” of travel
- Wave spring enhances the 2nd stage to further reduce felt recoil and muzzle rise
- Designed to be used with the A5 length buffer tube
- Buffer weight – 5oz
- Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
- Factory sealed air cushion, no maintenance required
- Spring loaded 3rd stage cushion softens return stroke
- Aluminum construction air cushion
- Custom flat wire spring
- Short Stroke System, eliminates BHO capabilities in some cases
- Not for use with Colt mag fed lowers
- Also designed to work with the S&W Response.
-
- Developed specifically for the JP Enterprises JP5 carbine
- Air cushioned on the recoil stroke for the last 1” of travel
- Wave spring enhances the 2nd stage to further reduce felt recoil and muzzle rise
- MUST BE USED with an A5 length buffer tube
- Buffer weight – 1oz
- Factory sealed air cushion, no maintenance required
- Aluminum construction air cushion
- Custom flat wire spring
- Allows for the use of BHO and LBHO
- SHIPPING 01/31/25
-
Sale!
- Air cushioned on the recoil stroke for the last ¾” of travel
- Buffer weight - 5oz
- Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
- Reduces felt recoil and muzzle jump
- Factory sealed air cushion, no maintenance required
- Spring loaded cushion softens return stroke
- Aluminum construction air cushion
- Custom flat wire spring
- Short Stroke System, eliminates BHO capabilities.
-
Sale!
- Black Nitride finish
- Stainless Steel
- Works only with AR-9mm barrels
- 14.9 ounces
- Works with both Glock and Colt magazines
- "Dog-bone" style key for faster cleaning*
- SHIPPING DEC. 10, 2025
-
Sale!
- Black Nitride finish
- Pivoting Extractor
- Low drag, low weight key
- 13.5oz
- Works with both Glock magazines*
- Allows for the Bolt hold open to function with a shorter stroked rifle.
- Faster trigger reset
- Comes with longer spacers to help shorten your stroke
- COMPLETE READY TO DROP IN w/firing pin, extractor, key, etc.
- SHIPPING DEC. 10, 2025
-
- Made out of TITANIUM
- No sharp internal corners
- Stress relieved
- Works with Taccom, Faxon, and Surmount bolts
-
Out of stock
- Under 6 ounces
- Lightest, most affordable carbon fiber handguard on the market
- Fire retardant
- Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
- Use's a standard Armorers wrench for installation to the upper receiver
-
Sale!Out of stock
- Made out of BLACK Carbon Fiber
- Aluminum barrel nut
- Small diameter for better grip
- 14.5" length
- 6oz total weight
- Works great with ULW barrels
- MLOK slots
- Blow back actions only!
-
- Machined Aluminium
- Threading fits the standard AR15 platform
- Blowback AR style only! (PCC, 22)
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
- Enhances Feeding Reliability
- Stainless Steel
- Removable
- Minimal fitting required upper can be modified with a small file
-
- 3/4” aluminum cushion
- 25# wave spring, .62” travel
- Designed for the S&W Response using the TACCOM adjustable 9mm buffer
- Will also work with the TACCOM ESSB Bolt and the TACCOM adjustable 9mm buffer combination
- Includes (2) optional 3/8” spacers, aluminum cushion and wave spring
-
- works with the 9MM FPC only
- Replaces factory end plug
- Helps reduce felt recoil
- Delrin (polymer) construction
- Allows for BHO to function
- Easy installation
-
Sale!
- works with 9MM, 10MM and 40SW FPC
- Replaces the factory charge handle
- Allows for solid, hassle free charging
- 'Hook' and charge with authority using one finger
- Allows for charging weapon with shorter magazines inserted in factory buttstock
- Eliminates the fold/lock feature
- Will not break
- the 2 cocking handles can be placed in any of the 3 tapped holes
-
Sale!Out of stock
- works on the 9mm, 10mm and 40sw FPC
- Lightweight, not bulky, fits the Rifle nicely
- High strength DELRIN polymer
- Adjustable for Length of Pull
- Butt Plate can be angled to fit in the ‘pocket’ of your shoulder
- Butt Plate has an aggressive texture will stay put!
- Aluminum QD swivel mount installed
- Comes with Assembly Hardware
- Retains the factory recoil system
- SHIPPING 3/27/26
-
Sale!
- only works with the 9mm OR 10mm FPC
- Light weight 1.1 ounces
- Black anodized aluminum finish
- Attaches with a 7/8” wrench (9MM) OR set screws (10MM)
- Allows the use of any AR15 hand guard nut
- hand guard and/or hand guard nuts are NOT included
-
Sale!Out of stock
- 13oz
- 13 5/8" long
- Aluminum hand guard/ steel nut
- Black anodized
- Picatinny top rail
- MLOK slots
-
Sale!
- works on the 9mm, 10mm and 40sw FPC
- Lightweight 2.0 ounces
- Black anodized aluminum
- Allows for red dot sight to be mounted similar in position to the AR15 platform
- Same height off the barrel as the factory rail
- Allows for iron sights to be co-witnessed with scope
- Will not increase folded foot print.
- SHIPPING 4/3/2026
-
Sale!
- Steel blade, black oxide coated
- Comes with green and red fiber optic
- Mil spec A2 sight height
- .06" diameter fiber optic front sight
-
Sale!
- Black Anodized aluminum
- One and two port design
- Top exhaust exit
- Keeps your sights on target
- .88” end works perfect with Ruger 22/45 and Browning Buck Mark
- ½-28 thread
- O-ring used to clock brake
-
Out of stock
- 5 port or 9 port design
- Light weight
- Short brake .7 oz
- Long brake 1.1 oz
- Look under options for thread sizes
- Black anodized aluminum
- Long comp designed to make 14.5” barrel legal
- Please double check your barrel thread before ordering!
-
- Black anodized 6061 Aluminum
- Mounts directly to barrel
- Picatinny Rail Spec
- Same Height as Rear Factory Rail
- Allows for use of detachable iron sights
- Uses factory screws to mount
- Designed to only work with rear factory rail
-
Sale!
- Use your trigger finger to engage/disengage safety
- Great for left handed shooters
- Replaces push button safety
- Works on Ruger 10/22 and Ruger PC Carbine
- .312” diameter Stainless safety barrel, delrin levers
- Can be installed while receiver is still in your stock
- Works with factory trigger group
- Check out our installation video below
-
- Super fast magazine changes
- Simple installation
- Stainless steel post
- Large button
