-
- Strap made out of nylon
- Attaches to your belt or belt loop for faster access
- Chamber flag made to universally fit all kinds of competition guns
-
- Comes with Spring, T-Nuts and Screws
- AR15 Kit - works w/ Lancer and Magpul magazines
- DOES NOT COME WITH AN EXTENSION
- These kits complete the free downloaded extensions available on our download page
-
Sale!
- Provides a positive hand stop
- MLOK design
- 3/4” diameter x 1” long
- Small foot print, compact
- Smooth and comfortable
-
Sale!
- Originally made for Mossberg 590 Shockwave and Remington TAC-14
- Can be used as generic handguard grip
- 80 Grit
- Grips made by 3M
-
Sale!Out of stock
- 3" diameter x 7 1/8" tall
- holds up to 250 rounds of 22rf ammo
- 3d printed
- engineered to be strong
- 'bullet' cap unscrews
-
- 80 grit
- Made by 3M
- MLOK comes with 10 pieces (x8 4.7" | x2 solid)
-
For use with:
- TACCOM LW Rifle Recoil System
- TACCOM ALW Rifle Recoil System
- Any Factory Rifle Recoil System
-
- Drop in assembly
- Low reciprocating mass
- Adjustable recoil spring preload with included spacers
- Steel BCG recommended
- Adjustable gas system required
- Spring NOT INCLUDED
- Both pieces (including spacers) - 2.5oz
- Reciprocating piece - 1oz
-
- Drop in assembly
- Low reciprocating mass
- Steel BCG recommended
- Adjustable gas system required
- Both pieces - 2.2oz
- Reciprocating piece - 1.1oz
-
Out of stockFor use with:
- TACCOM LW Carbine Recoil System
- Any Factory Carbine Recoil System
-
Out of stock
- Designed for carbine buffer tubes
- Light weight
- 3 stage action
- Negates the need for gas tuning
- 1.5 ounce total weight
- Does not come with recoil spring
-
- Drop in assembly
- Low reciprocating mass
- Steel BCG recommended
- Adjustable gas system required
- Both pieces - 1.1oz
- Reciprocating piece - 0.6oz
-
- For .750" diameter barrels
- Steel construction
- Super effective
- Wrench flats provide tight fit
- Angle forward design
- Black Nitride Finish
- 3 oz
- 1/2 28 thread
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
- Chrome Silicon Spring
- Improves Cycling and Overall Operation
- Longer service life than round wire springs
- Spring works in carbine and rifle buffer tubes
-
Out of stock
- Works with the 8up Gemini shell holders
- Assemble 1, 2, 3 or more 8up on the web belt
- Have 8, 16, 24 or 32 rounds on your chest.
- Convenient shoulder strap keeps everything in place
-
Out of stock
- Choose compact or spaced quad
- Can be used for dual or quad loading
- Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
- Aluminum construction
- Black anodized
- Holds 16 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Easy set up
- Some assembly required
-
Out of stock
- Choose compact or spaced quad
- Can be used for dual or quad loading
- Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
- Aluminum construction
- Black anodized
- Holds 12 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Easy set up
- Some assembly required
-
Out of stock
- Choose compact or spaced quad
- Can be used for dual or quad loading
- Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
- Aluminum construction
- Black anodized
- Holds 8 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Easy set up
- Some assembly required
-
Out of stock
- All aluminum construction
- Black anodized
- Holds 2 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Modular in that you can attach to backer with 2 screws
- Easy set up
-
- Replaces read SS screw so that you can adjust for shell length on the fly
- If ordering for 8up, you'll need to add x4 screws
- If ordering for 12up, you'll need to add x6 screws
- If ordering for 16up, you'll need to add x8 screws
-
- Works with TEKLOK (sold separately), TMMS and ELS.
- Articulates at the hip joint, no loss of motion.
- Comes with quick detach leg strap. 2 point attachment, belt and thigh. Remove the rig in seconds.
- 3/4" mount spacing allows you to mount TACCOM, Carbon Arms' and Invictus Practical shell holders.
-
- Holds 24 - 12 gauge shells
- Quaload design, but able to duaload as well.
- Works with TEKLOK (sold separately), TMMS and ELS.
- Articulates at the hip joint, no loss of motion.
- Comes with quick detach leg strap. 2 point attachment, belt and thigh. Remove the rig in seconds.
-
- Keeps your Chest Rig from slipping down during a stage
- Option to direct mount to backer plate
- Works with ALL Taccom Chest Rigs
- Also works with our competitor's chest rigs that use up to 2" wide nylon belts
-
- Holds 20 - 12 gauge shells
- Strong, light weight, great shell retention, smooth release
- Designed for load 4, will also work for the load 2
-
- Holds 16 - 12 gauge shells
- Strong, light weight, great shell retention, smooth release
- Designed for load 4, will also work for the load 2
-
- Holds 16 – 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
- Holds 12 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
- Holds 8 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
- Holds 16 - 12 gauge shells
- Strong, light weight, great shell retention, smooth release
- Designed for load 2 method of shotgun loading
-
- Holds 12 – 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for load 2 method of shotgun loading
-
- Holds 10 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for load 2 method of shotgun loading
-
- Holds 8 - 12 gauge shells
- works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for load 2 method of shotgun loading
-
- Raises Shell holders by as much as 1.5" on the belt
- Works with all TACCOM shell holders
- Works with Tek-Lok, TMMS and ELS hooks
-
- HIGH VISIBILITY
- NO DRAG
- fully machined follower, made from acetal (Delrin)
- 12 gauge pumps, semi-auto shotguns
- 2 models: friction free or friction free Nova/Vinci
-
Sale!
- Nylon strap
- Strap keeps your hand from slipping off the forearm
- Comes with steel backers for screws
-
Sale!
- Made universally for Mossberg 590/590A1 and Remington 870; TAC-14
- 80 Grit
- Made by 3M
-
Out of stock
- Breacher variation has 3 hardened steel prongs that aid in stabilizing the muzzle for door breaching
- Breacher variation allows for a ‘gap’ between the end of the muzzle and close target
- All extensions add one shell to the capacity of the magazine tube in most cases
- Knurled body allows for easy on/off with no tools
-
- 17-4 stainless steel
- Made for reliable shell feeding
- Works with any tube extension
-
- Machined Aluminium
- Anodized black
- Made ONLY for Taccom Extreme Extension tubes and/or nuts
-
- Anodized Aluminum
- Made for 12 gauge
- Made only to work with Extreme Extension Tube
-
- All variations come with a spring*
- Machined Aluminium and anodized black
- Threaded differently on both sides for a modular set up
- "Kits" variations come with tube of choice, spring, and end cap
- These tubes ONLY work with Taccom Extreme Extension nuts
- Nuts sold separately
-
- All variations come with a spring
- Machined Aluminium and anodized black
- Comes with tube of choice, spring, and end cap
- These tubes ONLY work with Taccom Extreme Extension nuts
- Nuts sold separately
-
- Super fast magazine changes
- Simple installation
- Stainless steel post
- Large button
-
Sale!
- Use your trigger finger to engage/disengage safety
- Great for left handed shooters
- Replaces push button safety
- Works on Ruger 10/22 and Ruger PC Carbine
- .312” diameter Stainless safety barrel, delrin levers
- Can be installed while receiver is still in your stock
- Works with factory trigger group
- Check out our installation video below
-
- Black anodized 6061 Aluminum
- Mounts directly to barrel
- Picatinny Rail Spec
- Same Height as Rear Factory Rail
- Allows for use of detachable iron sights
- Uses factory screws to mount
- Designed to only work with rear factory rail
-
Out of stock
- 5 port or 9 port design
- Light weight
- Short brake .7 oz
- Long brake 1.1 oz
- Look under options for thread sizes
- Black anodized aluminum
- Long comp designed to make 14.5” barrel legal
- Please double check your barrel thread before ordering!
-
Sale!
- Black Anodized aluminum
- One and two port design
- Top exhaust exit
- Keeps your sights on target
- .88” end works perfect with Ruger 22/45 and Browning Buck Mark
- ½-28 thread
- O-ring used to clock brake
-
Sale!
- Steel blade, black oxide coated
- Comes with green and red fiber optic
- Mil spec A2 sight height
- .06" diameter fiber optic front sight
-
Sale!
- works on the 9mm, 10mm and 40sw FPC
- Lightweight 2.0 ounces
- Black anodized aluminum
- Allows for red dot sight to be mounted similar in position to the AR15 platform
- Same height off the barrel as the factory rail
- Allows for iron sights to be co-witnessed with scope
- Will not increase folded foot print.
- SHIPPING 4/3/2026
-
Sale!
- FITS ALL MIL SPEC AR15 UPPERS
- 13oz
- 13 5/8" long
- Aluminum hand guard
- Black anodized
- Picatinny top rail
- MLOK slots
-
Sale!Out of stock
- only works with the 9mm OR 10mm FPC
- Light weight 1.1 ounces
- Black anodized aluminum finish
- Attaches with a 7/8” wrench (9MM) OR set screws (10MM)
- Allows the use of any AR15 hand guard nut
- hand guard and/or hand guard nuts are NOT included
-
Sale!Out of stock
- works on the 9mm, 10mm and 40sw FPC
- Lightweight, not bulky, fits the Rifle nicely
- High strength DELRIN polymer
- Adjustable for Length of Pull
- Butt Plate can be angled to fit in the ‘pocket’ of your shoulder
- Butt Plate has an aggressive texture will stay put!
- Aluminum QD swivel mount installed
- Comes with Assembly Hardware
- Retains the factory recoil system
- SHIPPING 6/12/26
-
Sale!Out of stock
- works with 9MM, 10MM and 40SW FPC
- Replaces the factory charge handle
- Allows for solid, hassle free charging
- 'Hook' and charge with authority using one finger
- Allows for charging weapon with shorter magazines inserted in factory buttstock
- Eliminates the fold/lock feature
- Will not break
- the 2 cocking handles can be placed in any of the 3 tapped holes
-
- works with the 9MM FPC only
- Replaces factory end plug
- Helps reduce felt recoil
- Delrin (polymer) construction
- Allows for BHO to function
- Easy installation
-
- 3/4” aluminum cushion
- 25# wave spring, .62” travel
- Designed for the S&W Response using the TACCOM adjustable 9mm buffer
- Will also work with the TACCOM ESSB Bolt and the TACCOM adjustable 9mm buffer combination
- Includes (2) optional 3/8” spacers, aluminum cushion and wave spring
-
- Enhances Feeding Reliability
- Stainless Steel
- Removable
- Minimal fitting required upper can be modified with a small file
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
- Machined Aluminium
- Threading fits the standard AR15 platform
- Blowback AR style only! (PCC, 22)
-
Sale!Out of stock
- Made out of BLACK Carbon Fiber
- Aluminum barrel nut
- Small diameter for better grip
- 14.5" length
- 6oz total weight
- Works great with ULW barrels
- MLOK slots
- Blow back actions only!
