- Comes with spring
- Adds 25 more rounds
- Designed for fast, easy cleaning
- Allows for bolt hold open
- Made of delrin
- Machined in house
-
-
- 5 port or 9 port design
- Light weight
- Short brake .7 oz
- Long brake 1.1 oz
- Look under options for thread sizes
- Black anodized aluminum
- Long comp designed to make 14.5” barrel legal
- Please double check your barrel thread before ordering!
-
- Choose compact or spaced quad
- Can be used for dual or quad loading
- Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
- Aluminum construction
- Black anodized
- Holds 8 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Easy set up
- Some assembly required
-
- Funnel makes magazine insertion easy and fast
- Extended bolt release easier to ‘find’
- Funnel is made from high density Delrin
- Extended bolt made out of 6061 Aluminum & Black Anodized
- *Will NOT work with ARV*
- Kit includes:
- Funnel
- Bolt release
-
- Comes with spring
- Adds 20 more rounds
- Designed for fast, easy cleaning
- Allows for bolt hold open
- Made of delrin
- Machined in house
-
Sale!
- Comes with high power extension spring
- Holds up to 56-57 w/ Glock 33 round 9mm magazine
- 10 oz (with factory Glock mag)
- Made from delrin (friction free | brass doesn't rub against metal)
- Easy to assemble and clean
-
- Holds 16 – 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
- All variations come with a spring*
- Machined Aluminium and anodized black
- Threaded differently on both sides for a modular set up
- "Kits" variations come with tube of choice, spring, and end cap
- These tubes ONLY work with Taccom Extreme Extension nuts
- Nuts sold separately
-
- Designed for carbine buffer tubes
- Light weight
- 3 stage action
- Negates the need for gas tuning
- 1.5 ounce total weight
- Does not come with recoil spring
-
Sale!
- Replaces the factory charge handle
- Allows for solid, hassle free charging
- 'Hook' and charge with authority using one finger
- Allows for charging weapon with shorter magazines inserted in factory buttstock
- Eliminates the fold/lock feature
- Will not break
-
Sale!
- Black Anodized aluminum
- One and two port design
- Top exhaust exit
- Keeps your sights on target
- .88” end works perfect with Ruger 22/45 and Browning Buck Mark
- ½-28 thread
- O-ring used to clock brake
-
Sale!
- Allows you to use the Holosun 510C on your Browning Buck Mark
- 6061 material
- Black anodized
- Lowest possible mounting
- Just over 4oz with stripped optic
-
Sale!
- Allows you to use the Holosun 510C on your Ruger 22/45
- 6061 material
- Black anodized
- Lowest possible mounting
- Just over 4oz with stripped optic
-
Sale!
- 6061 material
- Silver finish
- Lowest possible mounting
- Just over 4oz with stripped optic
- Stainless hardware
- Includes a free ambidextrous side bolt racker with purchase!
-
Sale!
- Light weight aluminum
- Black anodize
- Front riser clamps on barrel
- Fits .750 and .920 diameter barrels
- Rear riser designed for factory Ruger receiver
- Dove tail slots to accept Ruger factory iron sights
- Rear riser allows for multiple positions
- Comes with hardware
- Sights not included
-
- Designed for carbine buffer tubes
- Light weight
- 3 stage action
- Negates the need for gas tuning
- 1.5 ounce total weight
- Does not come with recoil spring
-
- Total weight 6oz-8oz
- 4 color options
- Made from extremely tough Lexon (.100” wall thickness)
- See your shells with ease
- Modular system (will work with all TACCOM extension tubes for adding even more rounds)
- Spring & Stabilizer included
- Nuts purchased separately
-
- 2 stage recoil system
- Aluminum buffer
- Internal 2nd stage, extended plunger
- Reduces felt recoil
- Works with factory recoil spring or modified AR15 carbine spring
- Eliminates coil bind over factory system
- Allows for use with Bolt Hold open
- Does not come with recoil spring**
-
- Works with SR9 and Glock Magazines
- Snaps on the Ruger factory stock with no tools
- Makes inserting replacement magazines easy and fast
- Made from Black Delrin
- Stock grip models 19100-19112
- Pistol grip models 19122, 19124, & 19126
- Easy to install
-
- Works with TEKLOK (sold separately), TMMS and ELS.
- Articulates at the hip joint, no loss of motion.
- Comes with quick detach leg strap. 2 point attachment, belt and thigh. Remove the rig in seconds.
- 3/4" mount spacing allows you to mount TACCOM, Carbon Arms' and Invictus Practical shell holders.
-
Sale!
- 8 position, extended buffer tube
- Compatible with the A5 Buffer System
- 5 ports to allow excess water and gas to escape the operating system
- Machined from 7075-T6 Aluminum with a durable hard coat anodized finish
-
- Adds 5 rounds to the factory 19 round magazine
- Uses factory 19 round spring
- Machined from Delrin
- Easy assembly
- Overlaps the parent magazine and will not come off
-
- Holds 12 – 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for load 2 method of shotgun loading
-
- Holds 12 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
- Kit comes with:
- Pressure plug
- Firing pin & spring
- Extractor & spring
- Recoil spring
- Will NOT work with M&P 15-22
- Kit comes with:
-
- Light weight Aluminum charge handle
- .25” longer than factory
- KIDD Innovative Stainless Steel Guide Rod
- KIDD Innovative Recoil spring pack
-
- 11.62” long
- 4oz
- 1/2-28 thread
- Unfinished aluminum
- End user to attach per ATF guide lines if wanting a legal 16” rifle barrel
-
Sale!
- Light weight 1.6 ounces
- Black anodized aluminum finish
- Easy installation
- Attaches with a 13/16” wrench
- Allows the use of any AR15 hand guard nut
-
Sale!
- Super lightweight 6061 aluminum
- Black anodize protective finish
- Ambidextrous design
- Makes charging your pistol effortless and FAST
- Easy installation with brass set screw
-
Sale!
- Mounts the 510C sight closer to bore
- Remove up to 4 ounces off the 510C
- Works on factory Ruger Receivers
- Comes with hardware to mount to receiver
- Black Anodized Aluminum
-
- Replaces factory recoil block
- Installs in minutes
- Helps reduce felt recoil
- Helps reduce muzzle rise
- Uses a 24# wave spring
- Engineered for long use
- *Will NOT work with ARV*
-
- Ambidextrous design
- Positive non-slip grab
- Will not come out under fire
- Stainless steel hardware
- Non-corrosive stainless steel cross bar
- Machined anodized black aluminum handles w/finger grooves
-
- Holds 6 - 12 Gauge Shells
- "Free Hand" style loading
- Easy to achieve several angles
- Compatible with Teklok or ELS (mounting systems SOLD SEPARATELY)
-
- Holds 10 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for load 2 method of shotgun loading
-
- Black anodized 6061 Aluminum
- Mounts directly to barrel
- Uses factory screws to mount
- ¼” lower than factory rail
- Allows for use of detachable iron sights
- Leaves the factory rail clear for mounting a red dot sight
- Picatinny Rail Spec
- Front and rear rail are at the same height off the bore
-
- Drop in assembly
- Low reciprocating mass
- Adjustable recoil spring preload with included spacers
- Steel BCG recommended
- Adjustable gas system required
- Spring NOT INCLUDED
- Both pieces (including spacers) - 2.5oz
- Reciprocating piece - 1oz
-
Sale!
- Adapter for the most popular micro dots
- 6061 aluminum black anodized
- .155” thick
- Uses factory hardware
- Easy installation
- Pick the plate for your red dot
- Plate #1 - Trijicon, Holosun 407c, 507c
- Plate #2 - Vortex Venom, Viper, Burris Fastfire, EOtech MRDS
- Plate #3 - C-More, Vortex Razor, Romeo 3, Delta optical
-
Sale!
- Black anodized aluminum
- Light weight
- Picatinney rail mount
- Compression fit on barrel
- Set same height as receiver rail
-
- Use your trigger finger to engage/disengage safety
- Great for left handed shooters
- Replaces push button safety
- Works on Ruger 10/22 and Ruger PC Carbine
- .312” diameter Stainless safety barrel, delrin levers
- Can be installed while receiver is still in your stock
- Works with factory trigger group
- Check out our installation video below
-
- Eliminates the barrel nut/shroud
- Works with short and long VR80 hand guards
- Low profile, does not interfere with sighting
- Makes your hand guard float
- Increased slug accuracy
- Made from 6061 aluminum
- Anodized black
- Installs with ease
-
- Holds 8 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
- Holds 8 - 12 gauge shells
- works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for load 2 method of shotgun loading
-
- Holds 4 - 12 Gauge Shells
- "Free Hand" style loading
- Easy to achieve several angles
- Compatible with Teklok or ELS (mounting systems SOLD SEPARATELY)
-
- Direct replacement
- Allows the use of your trigger finger for magazine release
- Retains ‘traditional’ magazine release as well.
- Ambidextrous design
- Black anodized aluminum
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
- Anodized Aluminum
- Made for 12 gauge
- Made only to work with Extreme Extension Tube
-
- 6 position carbine tube
- Commercial spec
- 6061-T6 Aluminum
- Black Hardcoat anodize
- Fits the VR80 & AR-9mm
- Comes with Castle Ring and AR15 latch plate
-
- Machined Aluminium
- Anodized black
- Made ONLY for Taccom Extreme Extension tubes and/or nuts
-
- Machined Aluminium
- Threading fits the standard AR15 platform
- Blowback AR style only! (PCC, 22)
-
Sale!
- 3/4” aluminum cushion
- 25# wave spring, .62” travel
- Designed for the S&W Response using the TACCOM adjustable 9mm buffer
- Will also work with the TACCOM ESSB Bolt and the TACCOM adjustable 9mm buffer combination
- Includes (2) optional 3/8” spacers, aluminum cushion and wave spring
-
- Direct replacement
- Works with factory selector levers
- Works with TACCOM extended lever
- Barrel only, use your existing fasteners
- Provides for a shorter throw to disengage the safety
- Works with aftermarket triggers
- May shorten the over-travel on the factory trigger as well.
-
- Chrome Silicon Spring
- Improves Cycling and Overall Operation
- Longer service life than round wire springs
- Will NOT fit factory VR80 buffer tube
- Fits commercial buffer tube
- Spring works in carbine and rifle buffer tubes
-
- Super fast magazine changes
- Simple installation
- Stainless steel post
- Large button
-
- Drop in assembly
- Low reciprocating mass
- Steel BCG recommended
- Adjustable gas system required
- Both pieces - 2.2oz
- Reciprocating piece - 1.1oz
-
- Made out of TITANIUM
- No sharp internal corners
- Stress relieved
- Works with Taccom, Faxon, and Surmount bolts
-
- Drop in assembly
- Low reciprocating mass
- Steel BCG recommended
- Adjustable gas system required
- Both pieces - 1.1oz
- Reciprocating piece - 0.6oz
-
Sale!
- Steel blade, black oxide coated
- Comes with green and red fiber optic
- Mil spec A2 sight height
- .06" diameter fiber optic front sight
-
- Allows your shotgun barrel to float
- Clamps only on the extension tube
- Molded unbreakable Nylon
- Comes with spacers to work with Taccom, Nordic, & RCIXtension tubes
- Will not 'crush' your tube when installing.
-
- Works with the 8up Gemini shell holders
- Assemble 1, 2, 3 or more 8up on the web belt
- Have 8, 16, 24 or 32 rounds on your chest.
- Convenient shoulder strap keeps everything in place