- Lightweight 2.0 ounces
- Black anodized aluminum
- Allows for red dot sight to be mounted similar in position to the AR15 platform
- Same height off the barrel as the factory rail
- Allows for iron sights to be co-witnessed with scope
- Will not increase folded foot print.
- Solid mounting with 6 screws
-
Sale!
-
Sale!
- Wide open sights, no clutter
- AR15 A2 Sight Height (rail height front/rear)
- .04” or .06” diameter fiber optic front sight
- Ghost ring rear or Buck Horn rear sight
- Super light each sight is less than 1 ounce
- Aluminum riser black anodized
- Adjustable for windage and elevation
-
Sale!
- Decrease mag reload times
- Mag release made out of 6061, black anodized aluminum
- High density Delrin magazine funnel
- High density Delrin Bolt Release Extension
- *Will NOT work with AKV*
- Bundle includes:
- ARV Funnel
- ARV Bolt Release Extension
- ARV Mag Release
-
- Length of pull from 10.5” to 15”
- Adjustable butt plate and rotational
- Total weight 9.5 oz
- Carbon Fiber, Aluminum, and Delrin Construction.
- Will also work on SIG MPX and MCX
- This is NOT a buffer tube
-
Sale!
- Helps reduce felt recoil
- Decrease mag reload times
- Bolt release, mag release, & recoil block made out of 6061, black anodized aluminum
- High density delrin funnel
- *Will NOT work with ARV*
- Bundle includes:
- AKV Funnel
- AKV Bolt Release
- AKV Mag Release
- AKV Recoil Cushion
-
- Less than 4oz
- 1.86” dia
- MLOK slots
- Use with factory rear sight, optic mount or our Rear Optic mount
- Easy installation
- See list below for model fit
-
Sale!
- 7% discounted bundle
- Package comes with
- Machined Delrin Magazine Funnel (will not fit pistol grip model)
- Extended Mag Release Button
- Charge Handle
- Delrin Butt Plate
- Machined funnel is made to work with both Glock & SR9 mags
-
- Under 6 ounces
- Lightest, most affordable carbon fiber handguard on the market
- Fire retardant
- Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
- Use's a standard Armorers wrench for installation to the upper receiver
-
Sale!
- Lightweight, not bulky, fits the Rifle nicely
- High strength DELRIN polymer
- Adjustable for Length of Pull
- Butt Plate can be angled to fit in the ‘pocket’ of your shoulder
- Butt Plate has an aggressive texture will stay put!
- Aluminum QD swivel mount installed
- Comes with Assembly Hardware
- Retains the factory recoil system
-
- 7% discounted bundle
- Package includes:
- VR80 recoil buffer
- VR80 Flat wire spring
- VR80 buffer tube
- Comes in Black
-
Sale!
- Black Nitride finish
- Stainless Steel
- Works only with AR-9mm barrels
- 14.9 ounces
- Works with both Glock and Colt magazines
- "Dog-bone" style key for faster cleaning*
-
- For .750" diameter barrels
- Steel construction
- Super effective
- Wrench flats provide tight fit
- Angle forward design
- Black Nitride Finish
- 3 oz
- 1/2 28 thread
-
- Holds 20 - 12 gauge shells
- Strong, light weight, great shell retention, smooth release
- Designed for load 4, will also work for the load 2
-
- Light Weight 3oz
- Made from 6061 aluminum
- Black anodized
- Threads on barrel
- Brass set screw will not damage barrel threads
- Comes with split retainers
- Hand guard slips over brake for cleaning gas system
- Allows for choke tube removal
-
- Black anodized aluminum
- Adds 8.25” to factory pistol barrel
- Overlaps factory barrel by .625” for a strong connection
- Extension weighs 2oz
- Makes the 1522P barrel a legal 16” rifle barrel
- Must be attached permanently per ATF guide lines
- **Can purchase the extension or send in your 1522P for modification (scroll down to learn more)
-
- Minimalist design
- Standard AR15 buffer tube threads
- Made from Delrin and Carbon Fiber
- Designed to work with Ruger 10/22 chassis
- Straight or angled for use with low mount iron sights
- Custom made for your specific length of pull (set for 10/22 actions and Taccom 10/22 chassis)
- This is NOT a buffer tube
-
- Holds 16 - 12 gauge shells
- Strong, light weight, great shell retention, smooth release
- Designed for load 4, will also work for the load 2
-
- Holds 16 - 12 gauge shells
- Strong, light weight, great shell retention, smooth release
- Designed for load 2 method of shotgun loading
-
- Breacher variation has 3 hardened steel prongs that aid in stabilizing the muzzle for door breaching
- Breacher variation allows for a ‘gap’ between the end of the muzzle and close target
- All extensions add one shell to the capacity of the magazine tube in most cases
- Knurled body allows for easy on/off with no tools
-
- All variations come with a spring
- Machined Aluminium and anodized black
- Comes with tube of choice, spring, and end cap
- These tubes ONLY work with Taccom Extreme Extension nuts
- Nuts sold separately
-
- Comes with spring
- Adds 25 more rounds
- Designed for fast, easy cleaning
- Allows for bolt hold open
- Made of delrin
- Machined in house
-
- 5 port or 9 port design
- Light weight
- Short brake .7 oz
- Long brake 1.1 oz
- Look under options for thread sizes
- Black anodized aluminum
- Long comp designed to make 14.5” barrel legal
- Please double check your barrel thread before ordering!
-
- Choose compact or spaced quad
- Can be used for dual or quad loading
- Mounts on Tekloc, ELS, PLM, etc belt attachments (not included)
- Aluminum construction
- Black anodized
- Holds 8 shells
- Manual hard adjustment for shell length
- Spring loaded for pressure
- Easy set up
- Some assembly required
-
- Funnel makes magazine insertion easy and fast
- Extended bolt release easier to ‘find’
- Funnel is made from high density Delrin
- Extended bolt made out of 6061 Aluminum & Black Anodized
- *Will NOT work with ARV*
- Kit includes:
- Funnel
- Bolt release
-
- Comes with spring
- Adds 20 more rounds
- Designed for fast, easy cleaning
- Allows for bolt hold open
- Made of delrin
- Machined in house
-
Sale!
- Comes with high power extension spring
- Holds up to 56-57 w/ Glock 33 round 9mm magazine
- 10 oz (with factory Glock mag)
- Made from delrin (friction free | brass doesn't rub against metal)
- Easy to assemble and clean
-
- Holds 16 – 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
- All variations come with a spring*
- Machined Aluminium and anodized black
- Threaded differently on both sides for a modular set up
- "Kits" variations come with tube of choice, spring, and end cap
- These tubes ONLY work with Taccom Extreme Extension nuts
- Nuts sold separately
-
- Designed for carbine buffer tubes
- Light weight
- 3 stage action
- Negates the need for gas tuning
- 1.5 ounce total weight
- Does not come with recoil spring
-
Sale!
- Replaces the factory charge handle
- Allows for solid, hassle free charging
- 'Hook' and charge with authority using one finger
- Allows for charging weapon with shorter magazines inserted in factory buttstock
- Eliminates the fold/lock feature
- Will not break
-
Sale!
- Black Anodized aluminum
- One and two port design
- Top exhaust exit
- Keeps your sights on target
- .88” end works perfect with Ruger 22/45 and Browning Buck Mark
- ½-28 thread
- O-ring used to clock brake
-
Sale!
- Allows you to use the Holosun 510C on your Browning Buck Mark
- 6061 material
- Black anodized
- Lowest possible mounting
- Just over 4oz with stripped optic
-
Sale!
- Allows you to use the Holosun 510C on your Ruger 22/45
- 6061 material
- Black anodized
- Lowest possible mounting
- Just over 4oz with stripped optic
-
Sale!
- 6061 material
- Silver finish
- Lowest possible mounting
- Just over 4oz with stripped optic
- Stainless hardware
- Includes a free ambidextrous side bolt racker with purchase!
-
Sale!
- Light weight aluminum
- Black anodize
- Front riser clamps on barrel
- Fits .750 and .920 diameter barrels
- Rear riser designed for factory Ruger receiver
- Dove tail slots to accept Ruger factory iron sights
- Rear riser allows for multiple positions
- Comes with hardware
- Sights not included
-
- Designed for carbine buffer tubes
- Light weight
- 3 stage action
- Negates the need for gas tuning
- 1.5 ounce total weight
- Does not come with recoil spring
-
- Total weight 6oz-8oz
- 4 color options
- Made from extremely tough Lexon (.100” wall thickness)
- See your shells with ease
- Modular system (will work with all TACCOM extension tubes for adding even more rounds)
- Spring & Stabilizer included
- Nuts purchased separately
-
- 2 stage recoil system
- Aluminum buffer
- Internal 2nd stage, extended plunger
- Reduces felt recoil
- Works with factory recoil spring or modified AR15 carbine spring
- Eliminates coil bind over factory system
- Allows for use with Bolt Hold open
- Does not come with recoil spring**
-
- Works with SR9 and Glock Magazines
- Snaps on the Ruger factory stock with no tools
- Makes inserting replacement magazines easy and fast
- Made from Black Delrin
- Stock grip models 19100-19112
- Pistol grip models 19122, 19124, & 19126
- Easy to install
-
- Works with TEKLOK (sold separately), TMMS and ELS.
- Articulates at the hip joint, no loss of motion.
- Comes with quick detach leg strap. 2 point attachment, belt and thigh. Remove the rig in seconds.
- 3/4" mount spacing allows you to mount TACCOM, Carbon Arms' and Invictus Practical shell holders.