- Length of pull from 10.5” to 15”
- Adjustable butt plate and rotational
- Total weight 9.5 oz
- Carbon Fiber, Aluminum, and Delrin Construction.
- Will also work on SIG MPX and MCX
- This is NOT a buffer tube
-
-
- Length of pull from 10.5" to 15”
- Butt Plate adjusts up/down and rotational
- Adjustable cheek riser
- Aluminum/Delrin construction
- Ambidextrous design allows for right or left handed shooters
- "M&P" variation slips over the 15-22 ‘faux’ tube
- "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
-
- 16” Aluminum Shrouded barrel
- 5.25” effective 1:10 rifling
- Super feed barrel (no bolt modification required)
- Lightweight 13.5oz
- Replaces factory trunnion block
- Accepts AR15 hand guards
-
Sale!
- Black anodized aluminum
- Light weight
- Picatinney rail mount
- Compression fit on barrel
- Set same height as receiver rail
-
Sale!
- 16" ULW barrel (5.25" effective rifling)
- Pin and weld aluminum shroud
- 15oz
- Black nitride bolt (extreme short stroke config)
- Bolt comes with short stroke pads
-
- 16” legal length rifle barrel
- Pin and weld aluminum shroud
- Approximately 5.25” effective rifling
- Throated chamber to allow for longer over all length ammunition
- Shroud is hard coat anodized
- HIGHLY recommend using our 3 stage adjustable PCC recoil system with this barrel for best performance
-
- Slick Side Upper
- Extreme ULW Hand Guard
- Choice of ULW, XLW, MID-B, or 10/16 barrel
- 2.5 pounds (with bolt)
- 9mm bolt sold separately
- Charge handle not included
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 4140 steel
- Black Nitride Finish
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 11oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and weld, brushed aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 15oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and weld, hard coat anodized aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 11.62” long
- 4oz
- 1/2-28 thread
- Unfinished aluminum
- End user to attach per ATF guide lines if wanting a legal 16” rifle barrel
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 14oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and welded aluminum shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
- 2 port mid-barrel brake
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 10” effective rifling
- 1:10” Twist rate
- 1/2-28 thread
- 13.5oz
- Works with any standard 9mm bolt
- Removable top ramp
- Hand polished bottom feed ramp
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP
-
- 13.5” barrel
- 4140 steel
- 1/2-28 thread
- 1lb 1oz
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- NOTE: ALLOW FOR 1 WEEK FOR THIS BARREL TO SHIP
-
Sale!
- 4150CM steel
- Black Nitride Finish
- Weight: 1lb 4oz
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 10” effective rifling (16" total length)
- 1:10” Twist rate
- Pinned and welded
- 1lb 3oz
- Works with any standard 9mm bolt
- Removable top ramp
- Hand polished bottom feed ramp
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
- 13.5” barrel w/ brake (16.25″ total)
- Steel brake – pinned/welded
- 1 lb 8oz
- 4140 steel
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- 14.5” barrel w/ brake (16.25″ total)
- Steel brake – pinned/welded
- 1 lb 6oz
- 4150cm steel
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any 9mm AR bolt on the market today
- For use with Glock and Colt style lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
- ALLOW UPTO 5 DAYS FOR ASSEMBLEY
-
- Designed for carbine buffer tube length
- For use in blow back actions only
- Comes with either Enhanced Carbine Spring or flat wire spring*
- 6.2 ounces
- 3 stage action
- Allows for the BHO to function
- If you need a spacer for a rifle length buffer tube, let us know in the comment section at checkout!
-
Sale!
- Black Nitride finish
- Stainless Steel
- Works only with AR-9mm barrels
- 14.9 ounces
- Works with both Glock and Colt magazines
- "Dog-bone" style key for faster cleaning*
-
Sale!
- Black Nitride finish
- Pivoting Extractor
- Low drag, low weight key
- 13.5oz
- Works with both Glock and Colt magazines*
- Allows for the Bolt hold open to function with a shorter stroked rifle.
- Faster trigger reset
- Comes with longer spacers to help shorten your stroke
- COMPLETE READY TO DROP IN w/firing pin, extractor, key, etc.
-
- Made out of TITANIUM
- No sharp internal corners
- Stress relieved
- Works with Taccom, Faxon, and Surmount bolts
-
- Under 6 ounces
- Lightest, most affordable carbon fiber handguard on the market
- Fire retardant
- Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
- Use's a standard Armorers wrench for installation to the upper receiver
-
Sale!
- Made out of Carbon Fiber
- Aluminum barrel nut
- Small diameter for better grip
- 14.5" length
- 6oz total weight
- Adjustable blast shield to be used with short barrels/long brakes
- Works great with ULW barrels
- MLOK slots
- Comes in Black, Green, Blue, Silver, & Red
- Blow back actions only!
-
Sale!
- Made out of Flake Carbon Fiber
- .1” wall thickness
- Aluminum barrel nut
- Small diameter for better grip
- 14.5″ length
- 6.5 oz total weight
- Works great with ULW barrels
- Blow back actions only!
-
- Machined Aluminium
- Threading fits the standard AR15 platform
- Blowback AR style only! (PCC, 22)
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
- Enhances Feeding Reliability
- Stainless Steel
- Removable
- Minimal fitting required upper can be modified with a small file
-
Sale!
- Comes with high power extension spring
- Holds up to 56-57 w/ Glock 33 round 9mm magazine
- 10 oz (with factory Glock mag)
- Made from delrin (friction free | brass doesn't rub against metal)
- Easy to assemble and clean
-
- 5 port or 9 port design
- Light weight
- Short brake .7 oz
- Long brake 1.1 oz
- Look under options for thread sizes
- Black anodized aluminum
- Long comp designed to make 14.5” barrel legal
- Please double check your barrel thread before ordering!
-
Sale!
- 7% discounted bundle
- Package comes with
- Machined Delrin Magazine Funnel (will not fit pistol grip model)
- Extended Mag Release Button
- Charge Handle
- Delrin Butt Plate
- Machined funnel is made to work with both Glock & SR9 mags
-
Sale!
- 7% discounted bundle
- Package comes with
- Machined Delrin Magazine Funnel (will not fit pistol grip model)
- Extended Mag Release Button
- Charge Handle
- Delrin Butt Plate
- Black anodized aluminum 1/2-28 Short Muzzle Brake
- Machined funnel is made to work with both Glock & SR9 mag
-
Sale!
- 7% discounted bundle
- Package comes with
- Machined Delrin Magazine Funnel (will not fit pistol grip model)
- Extended Mag Release Button
- Charge Handle
- Delrin Butt Plate
- Black anodized aluminum 1/2-28 Long Muzzle Brake
- Machined funnel is made to work with both Glock & SR9 mags
-
- Less than 4oz
- 1.86” dia
- MLOK slots
- Use with factory rear sight, optic mount or our Rear Optic mount
- Easy installation
- See list below for model fit
-
- Black anodized 6061 Aluminum
- Mounts directly to barrel
- Picatinny Rail Spec
- Same Height as Rear Factory Rail
- Allows for use of detachable iron sights
- Uses factory screws to mount
- Designed to only work with rear factory rail
-
- Black anodized 6061 Aluminum
- Mounts directly to barrel
- Uses factory screws to mount
- ¼” lower than factory rail
- Allows for use of detachable iron sights
- Leaves the factory rail clear for mounting a red dot sight
- Picatinny Rail Spec
- Front and rear rail are at the same height off the bore
-
- Black Anodized 6061 Aluminum
- Mounts directly to the barrel
- No loss of zero
- 1/4” lower than the factory rail
- Approximately 3” long
- Picatinney rail spec
- Shipping 5/20
-
- Solid Delrin, will not snag on clothing
- Laser etched pattern so it will not slip in the shoulder pocket
- Works with factory spacers and hardware
- CNC machined for a perfect fit
-
- Use your trigger finger to engage/disengage safety
- Great for left handed shooters
- Replaces push button safety
- Works on Ruger 10/22 and Ruger PC Carbine
- .312” diameter Stainless safety barrel, delrin levers
- Can be installed while receiver is still in your stock
- Works with factory trigger group
- Check out our installation video below
-
- Super fast magazine changes
- Simple installation
- Stainless steel post
- Large button
-
- Extended and Larger Diameter
- Aggressive Friction pattern, non-slip
- Machined in house
- Comes with attachment screw
-
- Works with SR9 and Glock Magazines
- Snaps on the Ruger factory stock with no tools
- Makes inserting replacement magazines easy and fast
- Made from Black Delrin
- Stock grip models 19100-19112
- Pistol grip models 19122, 19124, & 19126
- Easy to install
-
- Comes with Spring, T-Nuts and Screws
- AR15 Kit - works w/ Lancer and Magpul magazines
- DOES NOT COME WITH AN EXTENSION
- These kits complete the free downloaded extensions available on our download page
-
- Strap made out of nylon
- Attaches to your belt or belt loop for faster access
- Chamber flag made to universally fit all kinds of competition guns