-
- Enhances Feeding Reliability
- Stainless Steel
- Removable
- Minimal fitting required upper can be modified with a small file
-
- Designed for carbine buffer tube length
- For use in blow back actions only
- Comes with either Enhanced Carbine Spring or flat wire spring*
- 6.2 ounces
- 3 stage action
- Allows for the BHO to function
- If you need a spacer for a rifle length buffer tube, let us know in the comment section at checkout!
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
Sale!
- Black Nitride finish
- Stainless Steel
- Works only with AR-9mm barrels
- 14.9 ounces
- Works with both Glock and Colt magazines
- "Dog-bone" style key for faster cleaning*
- SHIPPING DEC. 10, 2025
-
Sale!
- Black Nitride finish
- Pivoting Extractor
- Low drag, low weight key
- 13.5oz
- Works with both Glock magazines*
- Allows for the Bolt hold open to function with a shorter stroked rifle.
- Faster trigger reset
- Comes with longer spacers to help shorten your stroke
- COMPLETE READY TO DROP IN w/firing pin, extractor, key, etc.
- SHIPPING DEC. 10, 2025
-
- Drop in assembly
- Low reciprocating mass
- Steel BCG recommended
- Adjustable gas system required
- Both pieces - 1.1oz
- Reciprocating piece - 0.6oz
-
Sale!
- works on the 9mm, 10mm and 40sw FPC
- Lightweight 2.0 ounces
- Black anodized aluminum
- Allows for red dot sight to be mounted similar in position to the AR15 platform
- Same height off the barrel as the factory rail
- Allows for iron sights to be co-witnessed with scope
- Will not increase folded foot print.
- SHIPPING 4/3/2026
-
- works with the 9MM FPC only
- Replaces factory end plug
- Helps reduce felt recoil
- Delrin (polymer) construction
- Allows for BHO to function
- Easy installation
-
- Made out of TITANIUM
- No sharp internal corners
- Stress relieved
- Works with Taccom, Faxon, and Surmount bolts
-
Sale!
- 16” legal length rifle barrel (5.25” effective rifling)
- 10oz
- Throated chamber to allow for longer over all length ammunition
- 1:10 twist rate
- Removable top ramp
- Hand polished bottom feed ramp
- Pin and welded Black Carbon Fiber Shroud
- Works with any standard 9mm bolts
- Supports the front end of glock magazines
- Works with both colt and glock lowers
-
Sale!
- 4140 steel
- Black Nitride Finish
- Throated chamber to allow for longer OAL length ammunition
- 1:10 twist rate
- 1/2-28 threaded end
- Removable top ramp
- Hand polished bottom feed ramp
- Works with any standard 9mm bolts
- Works with both colt and glock lowers
- If ordering for an FM9, please let us know in the comments during checkout so we can modify the feed ramp to work!
-
Sale!
- Use your trigger finger to engage/disengage safety
- Great for left handed shooters
- Replaces push button safety
- Works on Ruger 10/22 and Ruger PC Carbine
- .312” diameter Stainless safety barrel, delrin levers
- Can be installed while receiver is still in your stock
- Works with factory trigger group
- Check out our installation video below
-
Sale!
- Installs in seconds without tools
- Eliminates wear on lower receiver
- Improves reliability of Drop-In kits and Dedicated Uppers
- Will NOT work with M&P 15-22
-
Out of stock
- 5 port or 9 port design
- Light weight
- Short brake .7 oz
- Long brake 1.1 oz
- Look under options for thread sizes
- Black anodized aluminum
- Long comp designed to make 14.5” barrel legal
- Please double check your barrel thread before ordering!
-
For use with:
- TACCOM LW Carbine Recoil System
- Any Factory Carbine Recoil System
-
- All variations come with a spring*
- Machined Aluminium and anodized black
- Threaded differently on both sides for a modular set up
- "Kits" variations come with tube of choice, spring, and end cap
- These tubes ONLY work with Taccom Extreme Extension nuts
- Nuts sold separately
-
Out of stock
- Under 6 ounces
- Lightest, most affordable carbon fiber handguard on the market
- Fire retardant
- Attaches to the included barrel nut with one machine screw (yes, the fit is that nice)
- Use's a standard Armorers wrench for installation to the upper receiver
-
Sale!Out of stock
- Made out of BLACK Carbon Fiber
- Aluminum barrel nut
- Small diameter for better grip
- 14.5" length
- 6oz total weight
- Works great with ULW barrels
- MLOK slots
- Blow back actions only!
-
- Holds 8 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
- Super fast magazine changes
- Simple installation
- Stainless steel post
- Large button
-
- Length of pull from 10.5" to 15”
- Butt Plate adjusts up/down and rotational
- Adjustable cheek riser
- Aluminum/Delrin construction
- Ambidextrous design allows for right or left handed shooters
- "M&P" variation slips over the 15-22 ‘faux’ tube
- "M&P" variation will also fit MILSPEC carbine buffer tubes (1.14”)
-
- Holds 12 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
Sale!
- works with 9MM, 10MM and 40SW FPC
- Replaces the factory charge handle
- Allows for solid, hassle free charging
- 'Hook' and charge with authority using one finger
- Allows for charging weapon with shorter magazines inserted in factory buttstock
- Eliminates the fold/lock feature
- Will not break
- the 2 cocking handles can be placed in any of the 3 tapped holes
-
- Replaces the Factory Bumper on the back of the receiver
- Installs in minutes
- Helps reduce felt recoil
- Uses a 25# waves spring and clear hard Polyurethane
- Engineered for long use
-
Sale!Out of stock
- 12.2oz
- Comes with forearm
- Accepts standard AR15 hand grips
- Made out of strong delrin
- Accepts standard Ruger 10/22 receivers & similar
- AR hand grip not included
- Choose from Standard AR15 buffer tube extension or picatinny rail for butt stock attachment options
- Will not work with take down models
- SHIPPING 1/16/26
-
- 3/4” aluminum cushion
- 25# wave spring, .62” travel
- Designed for the S&W Response using the TACCOM adjustable 9mm buffer
- Will also work with the TACCOM ESSB Bolt and the TACCOM adjustable 9mm buffer combination
- Includes (2) optional 3/8” spacers, aluminum cushion and wave spring
-
- Replaces read SS screw so that you can adjust for shell length on the fly
- If ordering for 8up, you'll need to add x4 screws
- If ordering for 12up, you'll need to add x6 screws
- If ordering for 16up, you'll need to add x8 screws
-
- Holds 20 - 12 gauge shells
- Strong, light weight, great shell retention, smooth release
- Designed for load 4, will also work for the load 2
-
- Chrome Silicon Spring
- Improves Cycling and Overall Operation
- Longer service life than round wire springs
- Spring works in carbine and rifle buffer tubes
-
- 80 grit
- Made by 3M
- MLOK comes with 10 pieces (x8 4.7" | x2 solid)
-
- Strap made out of nylon
- Attaches to your belt or belt loop for faster access
- Chamber flag made to universally fit all kinds of competition guns
-
Sale!
- 16.25" legal rifle barrel (4.5" rifling)
- 10.2oz
- Drop in for all .920” applications
- 416SS steel barrel
- 3/4” diameter pinned and welded carbon fiber shroud
- 22LR Sport Chamber
- Will not work with takedown models
- SHIPPING 12/12/25
-
Sale!
- Nylon strap
- Strap keeps your hand from slipping off the forearm
- Comes with steel backers for screws
-
- Holds 8 - 12 gauge shells
- works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for load 2 method of shotgun loading
-
Out of stock
- Replaces factory recoil block
- Installs in minutes
- Helps reduce felt recoil
- Helps reduce muzzle rise
- Uses a 24# wave spring
- Engineered for long use
- *Will NOT work with ARV*
-
Sale!Out of stock
- works on the 9mm, 10mm and 40sw FPC
- Lightweight, not bulky, fits the Rifle nicely
- High strength DELRIN polymer
- Adjustable for Length of Pull
- Butt Plate can be angled to fit in the ‘pocket’ of your shoulder
- Butt Plate has an aggressive texture will stay put!
- Aluminum QD swivel mount installed
- Comes with Assembly Hardware
- Retains the factory recoil system
- SHIPPING 3/27/26
-
- HIGH VISIBILITY
- NO DRAG
- fully machined follower, made from acetal (Delrin)
- 12 gauge pumps, semi-auto shotguns
- 2 models: friction free or friction free Nova/Vinci
-
Out of stock
- Breacher variation has 3 hardened steel prongs that aid in stabilizing the muzzle for door breaching
- Breacher variation allows for a ‘gap’ between the end of the muzzle and close target
- All extensions add one shell to the capacity of the magazine tube in most cases
- Knurled body allows for easy on/off with no tools
-
- Holds 12 – 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for load 2 method of shotgun loading
-
- Anodized Aluminum
- Made for 12 gauge
- Made only to work with Extreme Extension Tube
-
Sale!
- Air cushioned on the recoil stroke for the last ¾” of travel
- Buffer weight - 5oz
- Developed mainly for 115, 124, and 147 grain loads (but will work with others too)
- Reduces felt recoil and muzzle jump
- Factory sealed air cushion, no maintenance required
- Spring loaded cushion softens return stroke
- Aluminum construction air cushion
- Custom flat wire spring
- Short Stroke System, eliminates BHO capabilities.
-
- Slick Side Upper
- Extreme ULW Hand Guard
- Choice of ULW, 1016, 1316, 16" BARRELS
- CARBON COLOR IS BLACK
- 9mm bolt sold separately
- Charge handle not included
-
- Made for 22 competition
- Spring engineered to our spec, reduced power
- designed to be used with shorter barrels
- recommended to be used with our ULW barrel
-
Out of stock
- Designed for carbine buffer tubes
- Light weight
- 3 stage action
- Negates the need for gas tuning
- 1.5 ounce total weight
- Does not come with recoil spring
-
- Keeps your Chest Rig from slipping down during a stage
- Option to direct mount to backer plate
- Works with ALL Taccom Chest Rigs
- Also works with our competitor's chest rigs that use up to 2" wide nylon belts
-
- Cleans out lead and poly coated build up from rounds over time
- Made out of steel
- Attachable to a drill
- PCC option WILL NOT work with XLW barrel
-
- Raises Shell holders by as much as 1.5" on the belt
- Works with all TACCOM shell holders
- Works with Tek-Lok, TMMS and ELS hooks
-
Sale!
- 10” effective rifling (16" total length)
- 1:10” Twist rate
- Pinned and welded
- stainless steel coupler (brake to barrel)
- 1lb 1.0oz (17 ounces)
- Works with any standard 9mm bolt
- Removable top ramp
- Removable bottom feed ramp
- 2 port brake design
- Unique Carbon fiber brake is pinned and cover welded to make a legal 16" rifle barrel
- We assemble these barrels per order and typically shipped within one week.
-
- Holds 16 – 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for quad load method of shotgun loading
-
- Made for 22 competition
- Spring engineered to our spec
- Works with CMMG, Model 1, and others
- Will NOT work with M&P 15-22
-
Sale!
- 16″ legal length rifle barrel (4.5″ rifling)
- 416 ss barrel
- 12oz
- Pin and welded, stainless steel shroud (.75" diameter)
- 22LR Sport Chamber
- Uses factory barrel collar, ejector, and roll pins from factory barrel
-
- Minimalist design
- Standard AR15 buffer tube threads
- Made from Delrin and Carbon Fiber
- Designed to work with Ruger 10/22 chassis
- Straight or angled for use with low mount iron sights
- Custom made for your specific length of pull (set for 10/22 actions and Taccom 10/22 chassis)
- This is NOT a buffer tube
-
For use with:
- TACCOM LW Rifle Recoil System
- TACCOM ALW Rifle Recoil System
- Any Factory Rifle Recoil System
-
- Holds 10 - 12 gauge shells
- Works with TEKLOK, TMMS, ELS and other belt attachments (sold separately)
- Designed for load 2 method of shotgun loading
-
Sale!Out of stock
- Black anodized aluminum
- Light weight
- Picatinney rail mount
- Compression fit on barrel
- Set same height as receiver rail
-
- Machined Aluminium
- Threading fits the standard AR15 platform
- Blowback AR style only! (PCC, 22)
-
- Holds 16 - 12 gauge shells
- Strong, light weight, great shell retention, smooth release
- Designed for load 2 method of shotgun loading
-
Sale!
- Provides a positive hand stop
- MLOK design
- 3/4” diameter x 1” long
- Small foot print, compact
- Smooth and comfortable
-
- 17-4 stainless steel
- Made for reliable shell feeding
- Works with any tube extension
